1 / 11

Introduction to Hand Tools Module 00103-04

Introduction to Hand Tools Module 00103-04. Transparency 1. Objectives. Upon completion of this module, you will be able to do the following: 1. Recognize and identify some of the basic hand tools used in the construction trade. 2. Use hand tools safely.

rosad
Télécharger la présentation

Introduction to Hand Tools Module 00103-04

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Introduction to Hand Tools Module 00103-04

  2. Transparency 1 Objectives Upon completion of this module, you will be able to do the following: 1. Recognize and identify some of the basic hand tools used in the construction trade. 2. Use hand tools safely. 3. Describe the basic procedures for taking care of hand tools.

  3. Transparency 2 Performance Tasks • Under supervision of the instructor, you should be able to: • 1. Visually inspect the following tools to determine if they are safe to use: • Hammer • Screwdriver • Saw • 2. Make a straight square cut using a crosscut saw. To prepare for swing, the trainee should mark the wood with a combination square and support the work. The first stroke should be toward the trainee’s body. The saw should be kept vertical to the work. • 3. Safely and properly use the following tools: • Hammer and cat’s paw (to drive and pull nails) • Screwdriver (slotted or Phillips) • Adjustable wrench • Tongue-and-groove pliers and adjustable wrench • Spirit level • Carpenter’s square and steel tape • Saw

  4. Transparency 3 Figure 3 - Six common types of screw heads

  5. Transparency 4 Figure 6 - Types of sledgehammers

  6. Transparency 5 Figure 8 - Ripping bars and nail pullers

  7. Transparency 6 Figure 9 - Types of pliers

  8. Transparency 7 Figure 12 - Steel rule

  9. Transparency 8 Figure 14 - Wooden folding rule

  10. Transparency 9 Figure 15 - Spirit level

  11. Transparency 10 Figure 17 - Types of squares

More Related