150 likes | 246 Vues
BEECO ACV PRESENTATION. Main Applications. Level Control. Pressure Control. Pump Control. Electronic Control. Flow Control. Safety Valves. LADWP Project. What are Beeco ’ s ACV main differentiators? Better Performance:
E N D
Main Applications Level Control Pressure Control Pump Control Electronic Control Flow Control Safety Valves
What are Beeco’s ACV main differentiators? • Better Performance: • Better pressure control at very low flows and at very high flows. Larger flow range. • Lower Cost of Ownership: • Reliability – Better materials being used as standard. • Maintainability – Simpler structure than competitors. • Shelf Life – More resistance to cavitation, where others fail. • Wider Control Solutions Range • Extensive Support: • Design phase: consultation in control application selection and valve type selection • After sale support
Performance: Stable regulation at low flowsOur competitors use inferior solutions at low flows: V-Port (V or U shape) Small diam. By-Pass Reduced Port
Beeco uses a patented and superior solution for low flow regulation which: • Does not requires by-pass • Does not affect the valve when fully open (like V-port)
Beeco ACV Low-Flow stability solution: FULLY OPEN REGULATING Low pressure-losses when fully open • Able to regulate at near zero flow rate. • No need for V-Port • No need for by-pass
Low cavitation index will enable safe operation under high pressure differential and low operation noise. • Beeco ACV valves were tested for cavitation by the hydraulic laboratory of Utah State university. Performance: Cavitation Index
Low Cost of Ownership: • Easy maintenance and service (trim is pulled upwards) • Low weight internal trim • No need for special tooling • No periodic parts replacement, greasing etc. • Self-flushing control filter • Same standard valve used for low and high flow • Standard internal SST internal trim (up to 200mm) • No preventive maintenance (just periodic inspection at long intervals) Long term operation with minimal operational costs!
Control Solutions: • A full range of hydraulic control solutions using a wide variety of control devices • Pressure Control applications • Flow control application • Water level control solutions • Safety and protection devices for water-supply systems, pumping systems etc. • Water hammer\Surge prevention & attenuation • Automated & Remote control of the hydraulic parameters Hyd. Control Solutions
Pre-Sale Support: Design phase assistance in: • Hydraulic control solution selection • Supplying computerized, Water-Hammer\Surge analysis • Tailoring the solution to the specific requirements Support
Enquiry (end customer or engineer/designer) Intake, Questionnaire, Gathering of Information Technical Considerations, Data Calculations, Software Simulation Solution Specification & Draft Layout Provision of Valve Solution
Additional Support: • Training programs • Technical back-up • One stop shop for a wide variety of supplementary devices Support