1 / 35

Physical Layer

Physical Layer. Nelson Fonseca. Principle in Action: Nyquist Theorem vs. Shannon Theorem. Nyquist Theorem: Nyquist sampling theorem f s ≧ 2 x f max Maximum data rate for noiseless channel 2 B log 2 L (B: bandwidth, L: # states to represent a symbol) 2 x 3k x log 2 2 = 6 kbps

rvelazquez
Télécharger la présentation

Physical Layer

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Physical Layer Nelson Fonseca

  2. Principle in Action: Nyquist Theorem vs. Shannon Theorem • Nyquist Theorem: • Nyquist sampling theorem • fs≧ 2 x fmax • Maximum data rate for noiseless channel • 2 B log2 L (B: bandwidth, L: # states to represent a symbol) • 2 x 3k x log2 2 = 6 kbps • Shannon Theorem: • Maximum data rate for noisy channel • B log2 (2(1+S/N)) (B: bandwidth, S: signal, N: noise) • 3k x log2 (2 x (1+1000)) = 32.9 kbps Chapter 2: Physical Layer

  3. Twisted Pair • Long distances between repeaters • Bandwidth depends on the diameter and length of the cabe • Crosstalk and atenuation • telephony and data communicatiom • Introduces delay (skew) in vídeo atraso

  4. Twisted Pair • Category 3, 5 e 6 (UTP, Unshield Twisted Pair) • UTP 25 pairs

  5. Twisted Pair • Cat3 (16 MHz) 10BASE TX e 100BASET • Cat5 (100 MHz) 100BASE TX e 1000BASET • Cat 6 (250 MHz) 1000Base T (1 Gbps) • Cat 6e 10000Base T (10 gbps) • Cat7 and Cat7a (1Gbps and 10 Gbps) • Maximum distance – 100 meters

  6. Coaxical Cable • Base band Coaxical cabel Oliver Heaviside • 50 ohms • Digital transmission • Maximum 2 Gbits in 1 Km

  7. Coaxical cabel • Broad Band • 75 ohms • Analog transmission • Cable TV, channels 6 MHz - 3 Mbps • Unideractional repeaters: single and duo cable systems

  8. Coaxial cable

  9. Power Line • Uses

  10. Optical Fibers • Optical Refraction • Multimode and unimode • 100Gbps – no need of amplifier for 100 Km • Three componentes: light source, fiber and optical detector • Solitons: pulse inverse seno hyperpolic format pulsos – long distances without distortion

  11. Optical Fibers

  12. Optical Fibers • Diameter: multimode (50 micra), unimode (10 micra). • Conectors lose 10% to 20% of light , encaixadores (10% de perda), fusão. • Source of light: LEDs and semicondictor lasers, • Reception: photodiode 100 Gbps.

  13. Fiber Cables • (a) Side view of a single fiber. • (b) End view of a sheath with three fibers.

  14. Fiber Cables (2) • A comparison of semiconductor diodes and LEDs as light sources.

  15. Optical Fibers • Passive Interface: • Conectors, LEDs and photodiode connected with the fiber – no electronic conversion • Does not impair transmission in case of na elemento stops working • Loss of light in connections

  16. Optical fibers • Repeaters: • Converts optical to electronic signal and then to optical again to renerate the power • In case of a fualt of a device, transmission • Long distances

  17. Optical Fibers: connecting continents

  18. Optical fibers • Disadvantas: need of experts • Expensive interfaces • Unidirection

  19. Electromagnetic Spectrum • The electromagnetic spectrum and its uses for communication.

  20. Electromagnectic Spectrum • Electromagneticspectrum • Speedof light 3 x 108 m/s (2/3 in cables) • lf = c • spread spectrum – changeoffrequence HedyLamarr

  21. Radio • High frequencies signals tend to propagate in straight • AM uses MF band, 1000 Km raio. • HF, VHF –refracted at ionosphere • Omnidirectional: transmitter and receiver do not need to be aligned • Low frequence waves penetrate walls.

  22. Microwave • Above 100 MHz, the waves travel in nearly straight lines and can therefore be narrowly focused • Receiver and transmitter aligned. • Towers located higher than 100 m, need of repeaters every 80 Km. • Multipath fading, refracted in lower ionosphere • Widely used in telephony and TV distribution

  23. Microwaves • High frequencies (10 GHz) absorved by rain • Low costs • industrial,cientific and medical band – no need for permission -902 a 928 MHz 5.725 a 5.850 GHz – wireless phones, gates

More Related