1 / 8

Introduction to Engineering 3-D Sketch from Multi-view with Missing Line

Introduction to Engineering 3-D Sketch from Multi-view with Missing Line. Review and more practice. In Class Problem. Given a multi-view drawing with one incomplete view, draw the isometric and add the missing line. Make The Box W = 6, H = 4, D = 4.

ryann
Télécharger la présentation

Introduction to Engineering 3-D Sketch from Multi-view with Missing Line

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Introduction to Engineering3-D Sketch from Multi-view with Missing Line Review and more practice

  2. In Class Problem • Given a multi-view drawing with one incomplete view, draw the isometric and add the missing line.

  3. Make The Box W = 6, H = 4, D = 4

  4. Cut away material shown to be missing in the top view

  5. Cut away material shown to be missing in the right side view

  6. Create semi-circular surface and hole as shown in front view

  7. Assignment #16 • Complete the Missing Line and Isometric handout in the Assignment Packet

More Related