1 / 3

Visit to Heidelberg

Visit to Heidelberg. Loek Ceelie Henk Schuijlenburg. Conclusions. HD will test the 2 hole tong US soldering NIKHEF will test the eye-let tong Cut straws shorter keep tolerance to minimum length Tong = 3mm in width (was 2mm) Gastight gluing end-block/straw in small template

sai
Télécharger la présentation

Visit to Heidelberg

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Visit to Heidelberg Loek Ceelie Henk Schuijlenburg

  2. Conclusions • HD will test the 2 hole tong US soldering • NIKHEF will test the eye-let tong • Cut straws shorter keep tolerance to minimum length • Tong = 3mm in width (was 2mm) • Gastight gluing end-block/straw in small template • Orientate middle block in panel template • Glue end-blocks to pcb in template first with extra tool • No glue between endblocks • Bubble glue two layers of end blocks during assembly • Avoid glue on soldering pads • Edge of pvc strip shorter • Kapton teflon strip in groove

  3. Observations: • Straws just fit tight in template in length • Gluing of end block in straw in large template takes more time • Capillary effect of glue moves the straws • Grouping of end blocks • 5 – 10 blocks without clearance + large clearance • Straw moves out the template • Vacuum test with NIKHEF pomp showed not enough pressing to hold straws in place • Fitting of dowel pins need attention • Avoid glue on soldering pads: *Edge of pvc strip shorter • Kapton teflon strip in groove to avoid glue dripping in • Ultra sonic soldering on both side of tong with 2 holes • Soldering contact strips in groups of 8 on pcb

More Related