1 / 24

Chapter 6.2 Physico-chemical treatment

Chapter 6.2 Physico-chemical treatment . Physico-chemical treatment. a range of cool processing techniques aim to reduce the hazardous potential of wastes may also offer re-use or recycling opportunities often used in combination to optimise hazardous wastes treatment

sally
Télécharger la présentation

Chapter 6.2 Physico-chemical treatment

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Chapter 6.2 Physico-chemical treatment TRP Chapter 6.2 1

  2. Physico-chemical treatment • a range of cool processing techniques • aim to reduce the hazardous potential of wastes • may also offer re-use or recycling opportunities • often used in combination to optimise hazardous wastes treatment • Chemical processes use chemical reactions to transform hazardous wastes into less hazardous substances • Physical processes enable different waste components to be separated or isolated, for • re-use or appropriate treatment or disposal TRP Chapter 6.2 2

  3. Physico-chemical treatmentfacilities • On-site vs off-site in central treatment facility • Some physical processes on-site eg sedimentation • Treatment may be integrated into manufacturing process • On-site treatment reduces: • volumes needing transport • transport costs TRP Chapter 6.2 3

  4. Physico-chemical treatment in central treatment facility • Off-site treatment allows for dedicated waste handling and treatment systems • Should provide: • Waste receiving station • Storage facilities for wastes awaiting treatment • Treatment areas for number and variety of processes used • Storage and disposal facilities for treatment residues eg reaction products, filter cake and wastewater • Storage for treated wastes to be incinerated, where appropriate • Laboratory services • Trained personnel TRP Chapter 6.2 4

  5. Treatment residues • All physico-chemical treatment processes generate residues which may: • be hazardous wastes themselves • be more concentrated than original waste • be suitable for recycling • require further treatment • need to be landfilled Sludge from physico-chemical treatment after pressing Source: Safe hazardous waste management systems 2002 ISWA TRP Chapter 6.2 5

  6. Physical processes • Many different physical treatment processes • Most are simple and low-cost • Choice depends on physical form of waste and its characteristics • Options include: • ·Separation • ·Sedimentation • ·Flotation • ·Drying • ·Evaporation • ·Sludge dewatering • ·Filtration Filter press Source: Safe hazardous waste management systems 2002 ISWA TRP Chapter 6.2 6

  7. Separation • Examples of separation techniques: • Sieving and screening - for dry materials of different particle size • Distillation - to separate liquids • Use of washing medium - to extract contaminants from soils or soluble components from solid wastes TRP Chapter 6.2 7

  8. Adsorption TRP Chapter 6.2 8

  9. Sedimentation • Used to separate particles held in suspension in a liquid which is principally aqueous • Uses gravity • May require mechanical or manual stirring • Suitable for a wide range of hazardous wastes • metals in waste water • neutralised acids and alkalis containing suspended metal hydroxides • metals that have been precipitated • Sludges may need further screening, drying or dewatering • Separated liquid may need further treatment TRP Chapter 6.2 9

  10. Sedimentation - example Source: Davd S Newby 1991 TRP Chapter 6.2 10

  11. Flotation • Relies on the natural behaviour of particles less dense than water • Is suitable for a range of waste types eg oil/water separation • Efficiency can be improved by blowing air through the liquid • size of air bubbles should be varied according to waste type TRP Chapter 6.2 11

  12. Drying and evaporation • May be needed after sedimentation • Options include: • Sludge drying beds • Centrifugal separation • Filtering and pressing TRP Chapter 6.2 12

  13. Drying and evaporation - example Belt filter - a continuous filtering process widely used for dewatering sludges TRP Chapter 6.2 13 Source: Guyer, Howard H Industrial processes and waste stream management, Wiley

  14. Chemical processes • change chemical properties of waste • use a chemical to treat a chemical • need details of waste composition and reactivity • need qualified staff to: • assess waste composition • monitor chemical reaction • check reaction results • Options include: • ·Reduction and oxidation • ·Neutralisation • ·Precipitation TRP Chapter 6.2 14

  15. Reduction and oxidation Some common oxidising and reducing reagents • Oxidising reagents • Sodium or calcium hypochlorite • Hydrogen peroxide • Chlorine • Potassium permanganate • UV • Ozone • Reducing reagents • Ferrous sulphate • Sodium sulphite • Sulphuric acid • Iron • Aluminium • Zinc • Sodium borohydride TRP Chapter 6.2 15

  16. Oxidation in practice • Needs expert design, careful operation to be safe • Is cost effective • Enables avoidance of harmful side reactions • Commonly used for cyanides • Easiest oxidising reagents: • sodium or calcium hypochlorite TRP Chapter 6.2 16

  17. Reduction in practice • Commonly used for chromates and chromic acids from chromium plating and tanning industries • Cr VI reduced to Cr III then removed by precipitation • Common reducing reagents: • ferrous sulphate • sodium sulphite/sulphuric acid TRP Chapter 6.2 17

  18. Neutralisation • A batch process • Used for wide variety of acidic and alkaline wastes • Acid wastes are neutralised by alkalis, and vice versa • Used to treat liquid wastes, sludges and gases • Reactions must be laboratory tested to control pH, identify complementary reagents • Neutralised liquid usually sent for sedimentation TRP Chapter 6.2 18

  19. Precipitation • Causes soluble substances to become less soluble/insoluble • Often used in combination with other treatment processes eg reduction, neutralisation • Effective treatment for wastewater containing toxic metals which arise in metal-plating and finishing industry, and mining • Calcium hydroxide (lime) most widely used reagent TRP Chapter 6.2 19

  20. Other chemical processes • Practical options can include: • Hydrolysis eg for some pesticides • Electrolysis eg for silver recovery from photographic wastewaters • Dechlorination eg for solvents • Chlorolysis eg for residues from chlorinated hydrocarbon manufacture TRP Chapter 6.2 20

  21. Combined physical & chemical processes • Two common examples: • ·Solvent extraction • ·Coagulation and flocculation Coagulation and flocculation TRP Chapter 6.2 21 Source: Guyer, Howard H Industrial processes and waste stream management, Wiley

  22. Physico-chemical treatment TRP Chapter 6.2 22 Source: David S Newby

  23. Key considerations • Waste reduction and avoidance by generators should always be a priority • Role of on-site vs off-site technologies • Need to consider residues from treatment processes and their disposal • Transitional technologies may be used until final high-quality installations are available TRP Chapter 6.2 23

  24. Chapter 6.2 Summary • Physical and chemical treatment includes a range of cool processing techniques • Often used in combination • Suitable for a wide range of waste types • May enable re-use or recycling • Treatment can be on-site or off-site • Processes inevitably generate residues TRP Chapter 6.2 24

More Related