1 / 13

10- Jul.-2001 Presented by J.K. Kang & Yang

Introduction to SGH-A300. 10- Jul.-2001 Presented by J.K. Kang & Yang. Agenda. 1. Introduction to SGH-A300 2. General Specification of GSM/DCS Handset 3. Chipset Solution used in SGH-A300 4. Block Diagrams of SGH-A300 5. Power On Sequence 6. Test Jig box 7. Trouble Shooting.

satya
Télécharger la présentation

10- Jul.-2001 Presented by J.K. Kang & Yang

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Introduction to SGH-A300 10-Jul.-2001 Presented by J.K. Kang & Yang

  2. Agenda • 1. Introduction to SGH-A300 • 2. General Specification of GSM/DCS • Handset • 3. Chipset Solution used in SGH-A300 • 4. Block Diagrams of SGH-A300 • 5. Power On Sequence • 6.Test Jig box • 7. Trouble Shooting

  3. 1. Introduction of SGH-A300 A. Features  Distinguished Design - Dual Window Folder  Easy Communication - IrDA  Excellent Business Companion Personal  Information Management Calendar / To Do List  Ring Customization / Melody Creation User Oriented Large Display & Navigation Key Map

  4. B. Specifications Weight 83g with Slim Battery  Dimensions(HxWxD) 81 x 42 x 22 mm  LCD Graphic LCD with variable fonts and animation  Battery Duration

  5. 2. General Specification of GSM/DCS Handset A. Frequency B. Receiver Reference Receiver Sensitivity Level : -102 dBm  Channel Width : 200 kHz  Required Receiver Noise Figure < 10.4 dB  Dynamic Range : -40 dBm ~ -110 dBm  Intermodulation : -102 + 3 = -99dBm (Interferer -49dBm ± 800 and 1600 kHz)

  6. C. Transmitter Power Class 4 &1 are used.

  7. 3. SGH-A300 Chipset Solution The Chipset for SGH-A300 CONEXANT Dual Band Chipset  M46 : Baseband Processor  IA : Integrated Analog  RF137 : Dualband Tranceiver  PMIC : Power Management IC  RF210 : LNA + Mixer  CX77301 : Power Amplifier Controller

  8. 4. Block diagram of SGH-A300

  9. 5. POWER ON SEQUENCE

  10. 5. POWER ON SEQUENCE II 1) Turn On Power Key or Insert the Test Cable to Interface connector. → PMIC(U401) detect Pwr_onoff(#45pin) or Ta_det(47) → M46(U201) detect Pwr_sns(U608 6pin). 2) PMIC Supply Vccd(U401 33,34pin(2.8V)) to M46(U201). Vosc(U401 28pin(2.8V)) to IA to oscillate Crystal(OSC101). Vcca1(U401 30pin(2.8V)) to IA. 3) IA generate 19.5MHz by Crystal(OSC101). 4) M46 put Clk-Rst on PMIC(U401 10pin), IA for requesting Clock(19.5MHz). 5) IA put 3.9MHz(19.5MHz/5) Clock on M46. 6) PMIC put POR(U401 11pin) on IA to alert IA. 7) IA put Reset_B(U501 2pin) on M46(U201), Flash Memory , LCD(CN603 2pin) Module. For normal Booting. 8) If SGH-A300 is not booting normally, M46 will put PMIC_Reset(U401 2pin) on PMIC.

  11. 5. POWER ON SEQUENCE III *Power On Squence Timing.

  12. 6. Test Jig box

  13. 7. Trouble Shooting • Power On Failure. • SIM Recognition Failure. • Battery Charging Failure. • Audio Failure ( Microphone, Speaker ) • Keypad Failure • Ring Indicator Failure • Back Light Failure • Alert Tone Failure • Call Failure ( DCS, GSM Rx and Tx part )

More Related