'Cooling tubes' diaporamas de présentation

SuperSVD Mechanics and Cooling

450 views • 32 slides

Stave Mechanical Issues

Stave Mechanical Issues. Basic Questions. Preliminary Indications Radiation level increasing by factor of 10 Potential silicon damage increases markedly Substantial increase in leakage current Suggesting potentially colder operation Radiation length issue

281 views • 17 slides

270 views • 14 slides

Mechanical Work Plan Discussion

217 views • 12 slides

NCSX Mod Coil C1 features requiring rework at PPPL

NCSX Mod Coil C1 features requiring rework at PPPL. This report focuses on the issues that could delay the start of coil winding and may require rework. Additional inspection(s) with the focus on FPA and Machine Assy should be performed.

221 views • 10 slides

Ekaship - Blg Lqg Series Cooler

BLG, LQG series lubricating oil and fresh water cooler is used to cool lubricating oil and fresh water of diesel engine. This cooler is shell expansion type of horizonal shell and straight tubes. The ends of cooling tubes are connected separately to left and right tube plate by means of expansion. There are one lubricating oil or fresh water inlet and outlet in left and right of shell. There are also two lift ring and tow drain plugs in the shell. The cooling water flowing in tubes conducts heat exchange with lubrication oil or fresh water while they flow across the tubes along the route rormed by curved membranes.

24 views • 1 slides