'Side slope' diaporamas de présentation

CHAPTER SIX:

CHAPTER SIX:. DESIGN OF CHANNELS AND IRRIGATION STRUCTURES. 6.1 DESIGN OF CHANNELS FOR STEADY UNIFORM FLOW. Channels are very important in Engineering projects especially in Irrigation and, Drainage. Channels used for irrigation are normally called canals

1.81k views • 62 slides

Profile Leveling

566 views • 36 slides

107 COMBAT SERVICE SUPPORT ELEMENT (CSSE) FUNDAMENTALS

107 COMBAT SERVICE SUPPORT ELEMENT (CSSE) FUNDAMENTALS. 107.1 Explain the mission of the Marine Logistic Group (MLG).

694 views • 32 slides

RCC Facing Using Vibrating Plate Compaction Methods

RCC Facing Using Vibrating Plate Compaction Methods. Many Farms Dam Spillway Stilling Basin and Downstream Apron. Many Farms Dam Spillway Stilling Basin 2:1 and 1:1 Side Slopes. Many Farms Dam Spillway. Trackhoe with vibrating plate compactor. Many Farms Dam Spillway.

637 views • 21 slides

275 views • 16 slides

The Sanderson Project

244 views • 12 slides

i 1

Diagram Illustrating Hydraulic Loading Sources to Soils Where the Decorah is the First Encountered Bedrock. Upper Carbonate aquifer area (a 1 ). r. i 2. i 1. Target soil area (a 3 ). p. Soils overlying the Decorah (a 2 ). r = runoff from upslope areas

270 views • 12 slides

Erodible Channels

Erodible Channels. Tractive Force Method. The Tractive Force. When water flows in a channel, a force is developed that acts in the direction of flow on the channel bed. This force, which is simply the pull of water on the wetted area is known as the tractive force.

502 views • 9 slides

Channel Design

Channel Design. Most Efficient Hydraulic Section. Most efficient Hydraulic Section. A section that gives maximum section factor, for a specified flow area, is called the most efficient hydraulic section or best hydraulic section. Most efficient Hydraulic Section.

330 views • 8 slides

Standard Step Method

Standard Step Method. Standard Step Method. Direct Step method is not suitable if we want to determine the flow depth at specified locations or if the channel is non-prismatic (i.e., channel cross section and/or bottom slope vary with distance)

1.07k views • 4 slides