1 / 4

Ripple P Fix

Ripple P Fix is Polyester Styrene Free Chemical anchor is specifically formulated to provide fast curing and loading times for most demanding structural and non-structural applications in concrete and masonry Ripple P Fix available in three variants 1. Ripple P Fix EC is designed to use in extreme cold conditions where base material temperature 2. Ripple P Fix FS is designed with fast setting formations which allows 2 minutes working time 3. Ripple P Fix most suitable for tropical climatic conditions such as India/ME continents – Available in India Ripple P Fix being Polyester based resin mortar based is used in hammer drilled holes and are suitable for extreme loads. The system is based on adhesion principle. The resulting bond is stronger than the base material, no additional load stress imparted to the base material in comparison with expansion type anchors and are therefore ideal for close to edge fixing, reduced center, group anchoring. Installation temperature of Ripple P Fix

seoripple
Télécharger la présentation

Ripple P Fix

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 1776-yr48179-pml2750 1776-yr48179-pml2750 12-SEP-14 12:46:46 12-SEP-14 12:46:46 PRINT DIRECTION DIRECTION PRINT India India R I P P L E I N J E C T I O N T E C H N I Q U E Installation Parameters Anchor Ø M8 M10 M12 M16 M20 M24 Ripple P Fix TM Embedment Depth (std) Torque Moment 10 Nm 20 Nm 40 Nm 80 Nm 150 Nm 200 Nm Characteristic Load 17 kN 22 kN 37 kN 57 kN 85 kN 118 kN Drill Hole Ø 10 mm 12 mm 14 mm 18 mm 22 mm 26 mm KG 80 mm 90 mm 110 mm 128 mm 170 mm 210 mm FOR HEAVY LOADS Gelling and curing times Application Temp. +10 to +20°C +20 to +25°C +25 to +30°C +30 to +35°C +35 to +40°C +40 to +45°C +45°C Installation Procedure 1 CONCRETE 5 3 2 4 6 Gel Time 15 minutes 10 minutes 7.5 minutes 5.0 minutes 3.5 minutes 2.5 minutes 2.5 minutes Load Time 5 hours 145 minutes 85 minutes 50 minutes 40 minutes 35 minutes 12 minutes ETA 1776-yr48179-pml2750 1776-yr48179-pml2750 12-SEP-14 12:46:46 12-SEP-14 12:46:46 European Technical Assessment ETAG 001 Parts 1 & 5 Option 7 Anchoring in concrete ETA-14/0295 x2 x2 165.000 165.000 7 8* 9 FOR VERY HOT CONDITIONS MASONRY PRINT DIRECTION DIRECTION PRINT LEED TESTED Store in original and unopened packaging, the correct way up and in cool and dry conditions between +5°C and +25°C. Do not expose to sunlight. MIN 50% 8* - Note: For hollow substrates use in combination with perforated sleeve and fill 100% with resin. THREADED BARS & REBARS Ripple P Fix PART A – Resin: DANGER. Contains: Contains Vinyl Toluene CAS No 25013-15-4. Hazards: H226 Flammable liquid and vapour. H304 May be fatal if swallowed and enters airways. H315 Causes skin irritation. H319 Causes serious eye irritation. Precautions: P280 Wear protective gloves/protective protection. P302+P352 IF ON SKIN: Wash with plenty of water. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P370+P378 In case of fire: Use foam, carbon dioxide, dry powder or water fog to extinguish. P501 Dispose of contents/container in accordance with national regulations. c India India clothing/eye protection/face G SLOW GEL FAST CURE I N J E C T I O N PART B - Hardener. WARNING. Contains: Benzoyl Peroxide CAS No 94-36-0. Hazards: H242 Heating may cause a fire. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H400 Very toxic to aquatic life. H412 Harmful to aquatic life with long lasting effects. Precautions: P273 Avoid release to the environment. P280 Wear protective gloves/protective clothing/eye protection/face protection. P302+P352 IF ON SKIN: Wash with plenty of water. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P411 Store at temperatures not exceeding 25°C/77°F. P501 Dispose of contents/container in accordance with national regulations. 80 mm 90 mm 110 mm 128 mm 80 Nm 150 Nm 200 Nm 118 kN R I P P L E T E C H N I Q U E Installation Parameters Anchor Ripple P Fix TM Embedment Depth (std) Torque Moment 10 Nm 20 Nm Characteristic Load 17 kN 22 kN 37 kN 57 kN 85 kN Drill Hole Ø 10 mm 12 mm 14 mm 18 mm 22 mm 26 mm Galvanized and Stainless Steel Ø M8 M10 M12 M16 M20 M24 KG • Multi-purpose and high performance anchoring system for use in concrete, masonry and other substrates • For use at temperatures of up to 45°C • Applications in dry wet & flooded holes • Reduced drilling diameters • Increased nozzle life DRY WET & FLOODED HOLES FOR HEAVY LOADS Ripple Construction Products Pvt. Ltd. 303-304, Royal Arcadia, Above SBI Bank, Balkampet, S.R. Nagar, Hyderabad - 500 038, Telangana, India. Tel: +91 40 400 40 707. 40 Nm www.rippleindia.in 170 mm 210 mm Expiry: Gelling and curing times Application Temp. +10 to +20°C +20 to +25°C +25 to +30°C +30 to +35°C +35 to +40°C +40 to +45°C +45°C Installation Procedure 1 Batch: OVERHEAD Applications Content: 410 ml CONCRETE 5 3 2 4 6 Gel Time 15 minutes 10 minutes 7.5 minutes 5.0 minutes 3.5 minutes 2.5 minutes 2.5 minutes Load Time 5 hours 145 minutes 85 minutes 50 minutes 40 minutes 35 minutes 12 minutes ETA Made in UK More Information European Technical Assessment ETAG 001 Parts 1 & 5 Option 7 Anchoring in concrete ETA-14/0295 x2 x2 165.000 165.000 190.000 190.000 9 7 8* FOR VERY HOT CONDITIONS MASONRY LEED TESTED Store in original and unopened packaging, the correct way up and in cool and dry conditions between +5°C and +25°C. Do not expose to sunlight. MIN 50% 8* - Note: For hollow substrates use in combination with perforated sleeve and fill 100% with resin. Black Cyan cutter Magenta Yellow THREADED BARS & REBARS Ripple P Fix PART A – Resin: DANGER. Contains: Contains Vinyl Toluene CAS No 25013-15-4. Hazards: H226 Flammable liquid and vapour. H304 May be fatal if swallowed and enters airways. H315 Causes skin irritation. H319 Causes serious eye irritation. Precautions: P280 Wear protective gloves/protective protection. P302+P352 IF ON SKIN: Wash with plenty of water. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P370+P378 In case of fire: Use foam, carbon dioxide, dry powder or water fog to extinguish. P501 Dispose of contents/container in accordance with national regulations. c clothing/eye protection/face G TM SLOW GEL FAST CURE PART B - Hardener. WARNING. Contains: Benzoyl Peroxide CAS No 94-36-0. Hazards: H242 Heating may cause a fire. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H400 Very toxic to aquatic life. H412 Harmful to aquatic life with long lasting effects. Precautions: P273 Avoid release to the environment. P280 Wear protective gloves/protective clothing/eye protection/face protection. P302+P352 IF ON SKIN: Wash with plenty of water. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P411 Store at temperatures not exceeding 25°C/77°F. P501 Dispose of contents/container in accordance with national regulations. TM I n d i a Galvanized and Stainless Steel I n d i a • Multi-purpose and high performance anchoring system for use in concrete, masonry and other substrates • For use at temperatures of up to 45°C • Applications in dry wet & flooded holes • Reduced drilling diameters • Increased nozzle life DRY WET & FLOODED HOLES Ripple Construction Products Pvt. Ltd. 303-304, Royal Arcadia, Above SBI Bank, Balkampet, S.R. Nagar, Hyderabad - 500 038, Telangana, India. Tel: +91 40 400 40 707. www.rippleindia.in Expiry: Batch: OVERHEAD Applications Content: 410 ml Made in UK More Information 190.000 190.000 Black Cyan cutter Magenta Yellow

  2. 1776-yr48179-pml2750 1776-yr48179-pml2750 12-SEP-14 12:46:46 12-SEP-14 12:46:46 PRINT DIRECTION DIRECTION PRINT India India R I P P L E I N J E C T I O N T E C H N I Q U E Installation Parameters Anchor Ø M8 M10 M12 M16 M20 M24 Ripple P Fix TM Embedment Depth (std) Torque Moment 10 Nm 20 Nm 40 Nm 80 Nm 150 Nm 200 Nm Characteristic Load 17 kN 22 kN 37 kN 57 kN 85 kN 118 kN Drill Hole Ø 10 mm 12 mm 14 mm 18 mm 22 mm 26 mm KG 80 mm 90 mm 110 mm 128 mm 170 mm 210 mm FOR HEAVY LOADS Multi-Purpose Polyester Styrene Free Chemical Anchoring System Gelling and curing times Application Temp. +10 to +20°C +20 to +25°C +25 to +30°C +30 to +35°C +35 to +40°C +40 to +45°C +45°C Installation Procedure 1 CONCRETE 5 3 2 4 6 Gel Time 15 minutes 10 minutes 7.5 minutes 5.0 minutes 3.5 minutes 2.5 minutes 2.5 minutes Load Time 5 hours 145 minutes 85 minutes 50 minutes 40 minutes 35 minutes 12 minutes ETA European Technical Assessment ETAG 001 Parts 1 & 5 Option 7 Anchoring in concrete ETA-14/0295 x2 x2 165.000 165.000 7 8* 9 FOR VERY HOT CONDITIONS MASONRY LEED TESTED Store in original and unopened packaging, the correct way up and in cool and dry conditions between +5°C and +25°C. Do not expose to sunlight. MIN 50% 8* - Note: For hollow substrates use in combination with perforated sleeve and fill 100% with resin. THREADED BARS & REBARS Ripple P Fix PART A – Resin: DANGER. Contains: Contains Vinyl Toluene CAS No 25013-15-4. Hazards: H226 Flammable liquid and vapour. H304 May be fatal if swallowed and enters airways. H315 Causes skin irritation. H319 Causes serious eye irritation. Precautions: P280 Wear protective gloves/protective protection. P302+P352 IF ON SKIN: Wash with plenty of water. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P370+P378 In case of fire: Use foam, carbon dioxide, dry powder or water fog to extinguish. P501 Dispose of contents/container in accordance with national regulations. c clothing/eye protection/face G SLOW GEL FAST CURE PART B - Hardener. WARNING. Contains: Benzoyl Peroxide CAS No 94-36-0. Hazards: H242 Heating may cause a fire. H317 May cause an allergic skin reaction. H319 Causes serious eye irritation. H400 Very toxic to aquatic life. H412 Harmful to aquatic life with long lasting effects. Precautions: P273 Avoid release to the environment. P280 Wear protective gloves/protective clothing/eye protection/face protection. P302+P352 IF ON SKIN: Wash with plenty of water. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P411 Store at temperatures not exceeding 25°C/77°F. P501 Dispose of contents/container in accordance with national regulations. Galvanized and Stainless Steel • Multi-purpose and high performance anchoring system for use in concrete, masonry and other substrates • For use at temperatures of up to 45°C • Applications in dry wet & flooded holes • Reduced drilling diameters • Increased nozzle life DRY WET & FLOODED HOLES Ripple Construction Products Pvt. Ltd. 303-304, Royal Arcadia, Above SBI Bank, Balkampet, S.R. Nagar, Hyderabad - 500 038, Telangana, India. Tel: +91 40 400 40 707. www.rippleindia.in Expiry: Batch: OVERHEAD Applications Content: 410 ml Made in UK More Information 190.000 190.000 Black Cyan cutter Magenta Yellow 7 3 5 8 4 2 6 9 1 Fill min 2/3 rd x2 x2 x2 x2 x2 TM I n d i a

  3. TM I n d i a

  4. TM I n d i a

More Related