1 / 9

Wideband Communications

Wideband Communications . Lecture 10-11: DMT Aliazam Abbasfar. Outline. Synchronization PAPR Freq EQ Zero prefix. Synchronization issues. Timing acquisition and Coarse frequency offset estimation Pilot symbols Timing offset timing synchronization errors Data rotation

serena
Télécharger la présentation

Wideband Communications

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Wideband Communications Lecture 10-11: DMT Aliazam Abbasfar

  2. Outline • Synchronization • PAPR • Freq EQ • Zero prefix

  3. Synchronization issues • Timing acquisition and Coarse frequency offset estimation • Pilot symbols • Timing offset • timing synchronization errors • Data rotation • Carrier phase offset • Data rotation • Carrier frequency offset • mismatched oscillators, Doppler frequency shifts • Causes attenuation and ICI • y = diag{wak}kQLX; a=Dw/w0 • Sampling frequency offset : x[k] = y( k(T’+dt)) • y = Q’L X; w’ = w(1+a); a=dt/NT’

  4. Peak Power/Amplitude • The linear range of TX/RX circuits • Non-linearity degrades performance • Extended linear range is more expensive • Peak amplitude • xmax = max( |x(t)| ) 0<t<T • Digital xmaxvs Analog xmax • Range of DAC/ADC • Range of PA • Peak power • Pmax = max( |x(t)|2 ) 0<t<T • Peak to Average Power Ratio (PAPR) • Pmax / Pavg = max( |x(t)|2 ) / E[ |x(t)|2 ] • Peak to Mean Envelope Power Ratio (PMEPR) • PAPR <= PMEPR

  5. PAPR distribution • E[ |x|2 ] = E[ |X|2 ] = EX = S En • x = Q* X • xk : Gaussian distribution when N is large • Large values happens rarely • PAPR is different for DMT/OFDM symbols • P( PAPR > a ) = (xk > sqrt(a) sx) = Q(sqrt(a)) • a = 18 dB  1e-15 • a = 14.2 dB  1e-7 • a = 12.5 dB  1e-5 • Worst case : All Xn are co-phase (PAPR = N)

  6. PAPR reduction techniques • Clipping • Error in all tones • Spectrum re-growth • Reduce the probability of high peaks • SLM/PTS • Low overhead/High complexity • Reserved tones • min max |x + Q*C| • Linear programming • Iterative algorithms • 5-20% is good enough • Tone injection • Add levels to some tones • Extra power ( 5%) • No extra tones • Coding • Add redundancy to reduce PAPR • Coding gain • Data rates are low

  7. Frequency domain EQ • x is single carrier data stream + cyclic prefix • y = P x + n • P is circulant : P = Q* L Q • FFT the received samples • Qy = LQx + Qn • Equalize • L-1Qy = Qx+ L-1Qn • Convert it to time domain (IFFT) • Q*L-1Qy = x+ Q*L-1Qn • Low PAPR • No bit loading • Noise enhancement • Good for COFDM

  8. Zero extension • No cyclic prefix • Zero is sent in guard time • Make P circulant in RX • Add the CP to the beginning of the symbol • No wasted power in CP • Added noise in CP

  9. Reading • Cioffi Ch. 4.10

More Related