120 likes | 236 Vues
This presentation outlines a proposed cable car system providing breathtaking views of the Taj Mahal. The cable car will operate between key locations: starting points near Shilpgram Parking Lot and the Yamuna River bank, leading to scenic destinations like Mehatab Bagh Garden and Agra Fort. Designed for convenience, the system will employ battery-operated vehicles for tourist transport between designated points. The system leverages features from the London Eye, offering smooth and unobstructed panoramic views of the Taj Mahal and surroundings, significantly enhancing the tourist experience.
E N D
The wheel of the London Eye turns once every 30 minutes, which is slow enough to allow passengers to get on and off the boarding platform (1) without it stopping. • On a clear day the highest point on the ride (2) gives views of about 30 km in all directions. • The capsules (3) do not hang like the gondolas of the old type of big wheel, but rotate in mounting rings outside the wheel rim to give passengers the best unobstructed views. • The hub of the wheel (4) sits on top of the A-frame legs (5) and the forces are taken by 6 steel cables attached to a 1200 tones block of concrete in the ground. The hub and spindle castings were made by skoda steel.
The London Eye was manufactured in under 16 months by teams from five countries. The assembled wheel was hoisted from barges on the river into vertical position in a single operation. • The British Airways London Eye website can be seen
Proposed way for cable car (Rope way) Rope way plate form
Detail • Starting point (1) - Near Shilpgram Parking lot. • Reach point (2) - Near Mehatab Bagh Garden. • Starting point (3) - Yamuna river bank near Railway bridge. • End point (4) - Near Agra fort. Note – • All location mention in above city map. • For transport of tourist from location No. 2 to location No. 3 battery operated vehicle introduced by Agra Development Authority.