1 / 13

AUT 112

AUT 112 . Valve Adjustments From Cpt 30 Pgs 593 – 596. Valve Adjustments. Engines with solid/mechanical valve mechanisms require periodic adjustment to insure that the proper free clearance exists between the valve operating mechanism and the valve itself. Valve Adjustments.

skyler-pierce
Télécharger la présentation

AUT 112

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. AUT 112 Valve Adjustments From Cpt 30 Pgs 593 – 596

  2. Valve Adjustments • Engines with solid/mechanical valve mechanisms require periodic adjustment to insure that the proper free clearance exists between the valve operating mechanism and the valve itself.

  3. Valve Adjustments • The primary method of measuring valve clearance is with a feeler gauge. • Normally graduated by .001” • May also be purchased in metric increments.

  4. Valve Adjustments • When using a feeler gauge, the classic instructions state to insert the appropriate sized gauge and you should feel a slight drag when you move it. • I prefer that you use the Go, No/Go procedure.

  5. Valve Adjustments • There are three primary types of mechanical valve adjustments. • Shims • Screw Type • Rocker arm Post

  6. Valve Adjustments • Shim type valve adjusters use a “shim” machined to precise tolerances to act as both the cam follower and to make adjustments to the valve clearance.

  7. Valve Adjustments • Screw type adjusters.

  8. Valve Adjustments • Rocker Arm Post

  9. Valve Adjusting Procedure • Remove the spark plugs • Remove the rocker/cam cover. • Turn the engine, by hand, until the #1 piston is in the TDC Position on the compression stroke.

  10. Valve Adjusting Procedure • Set the valve clearance as specified by the manufacturer, like this. . .

  11. Valve Adjusting Procedure • Or like this.

  12. Valve Adjusting Procedure • Or like this.

  13. Valve Adjusting Procedure • After you’ve completed one cylinder, move to the next cylinder by firing order. • Place that cylinder in TCD compression and make your measurements/adjustments. • Continue the procedure until completed.

More Related