1 / 23

Welcome to YOUR Integrated ECT CAD/CAM using PICs Presentation Evening

Welcome to YOUR Integrated ECT CAD/CAM using PICs Presentation Evening. Part of Digital D&T Programme about Embedding Electronics in CAD/CAM products. So why did we take part in this project…..?. Supporting the initiative…….

slade
Télécharger la présentation

Welcome to YOUR Integrated ECT CAD/CAM using PICs Presentation Evening

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Welcome to YOUR Integrated ECT CAD/CAM using PICs Presentation Evening Part of Digital D&T Programme about Embedding Electronics in CAD/CAM products.

  2. So why did we take part in this project…..?

  3. Supporting the initiative…….

  4. "I think British design is important across the world. It's one of the things that makes Britain stand out around the world. I think that's incredibly important. It's part of our global identity." Ed Vaizey, October 2010

  5. “There has to be a sense that manufacturing offers a good, attractive, career opportunity through skill training for school leavers and for graduates. Partly this is about capturing the imagination of what it will be like in the industries of the future. It is also about communicating that average salaries are comparable to those in the legal or financial services.” Vince Cable, January 2011

  6. but the downside is…….

  7. GCSE D&T entries: 2007,2008, 2009 and2010 Statistical First Release; DCSF; 2007, 2008, 2009 Awarding bodies 2010 5% 3%

  8. So why are we here…..? You are the face of the future of our subject – without your passion, you lobbying your SLT, your governors, your local press, your MP ………we are a dead subject

  9. Learning Outcomes By the end of the session, course delegates will :- • Have designed • a rear bike light for a mountain bike (beginners) • a SOS whistle with some LED features (advanced) • have designed a circuit board using PICs • have an understanding of some of the features of CAD software • Design a CAD housing for the product • Produced .stl files for 3D printing

  10. Designed the Printed Circuit Board Designed a CAD enclosure for the product ready for 3D printing Designing a PIC based circuit We used the following algorithm for designing our project Downloaded Program INPUT PROCESS OUTPUT FEEDBACK

  11. The Bike Light – Ian, Nicky & Les

  12. The Bike Light – Ian, Nicky & Les PCB Stuff

  13. Worked hard to integrate small switches – all sorts of problems then changed design

  14. You may find this link useful it will provide you with a viewer to look at .stl files www.edrawingsviewer.com/pages/products/index.htm

  15. Bike Light

  16. Ian will talk about the CAD software

  17. Over to you for your presentations

  18. SoS Whistle

  19. The SoS Whistle – Ian, Nicky & Les

  20. Mates with 2 contacts in body when lid is screwed down 2 wire contacts in lid On/off switch

  21. So much to tell you here……. I think I’ll best describe the PCB

  22. Over to you for your presentations

More Related