1 / 6

Raceways

Raceways. Introduction. Raceways are considered flow-through systems. Beging simple to construct they are some of the oldest designs in aquaculture. Water sources for raceway aquaculture operations are usually streams, springs, reservoirs or deep wells. What materials?.

slone
Télécharger la présentation

Raceways

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Raceways

  2. Introduction • Raceways are considered flow-through systems. • Beging simple to construct they are some of the oldest designs in aquaculture. • Water sources for raceway aquaculture operations are usually streams, springs, reservoirs or deep wells.

  3. What materials? • What do you need to make a raceway? • In today’s market...lots of concrete!

  4. How long? • Length x width of 6:1 is recommended. • This prevents the fish stock from swimming in circular movements, which would cause debris to build up in the center. • If the width is too large this could result in a feeble current speed which is not desirable (see below). • Length is usually constrained by the water quality or stocking density.

  5. How deep? • Average depth of a raceway for fin fish, such as rainbow trout, is about three feet. • This means each section in a raceway should be about 90 ft long and 6-9 ft wide. • A slope of 1-2% doesn’t hurt either!

  6. How many fish? • For trout, stocking rates of 30 to 50 kg/m3 are normal at the end of a rearing cycle! • While for marine species, such as sea-bass and sea-bream, the achievable load is lower, between 15 and 20 kg/m3. • Raceway volume required = total amount of fish in kg/stocking rate in kg per m3.

More Related