Grease trap cleaning services to improve the image of your business and also keep it compliant with local regulations

1. Grease trap cleaning services to improve the image of your business and also keep it compliant with local regulations 

2. INTRODUCTION Grease trap is highly valuable for the food industry, hotels, and kitchens as it prevents food, oil and grease (FOG) from remaining in the wastewater as it drains into sewer pipes. Failure to keep these clogging materials out of the city sewer lines can have unwanted consequences. Waste from commercial kitchens enters the grease trap through an entry point and flows down, coming out of the pipe in the lower portion of the trap. This allows grease and oil to float to the surface of the grease trap while heavier waste moves to the bottom. The water flows through the outlet pipe, thus preventing grease and solids from entering the wastewater stream. This way, a grease trap keeps FOG and prevents its release into city lines. Most of the floating FOG is trapped by a barrier which allows water to flow under the exit pipe. This way, a grease trap ensures that the wastewater entering the exit pipe is relatively free of FOG, and thus becomes more suitable for discharge into city lines.  Over time, layers of grease and sediment may build up, and eventually force the water into the city sewer system if the trap is not cleaned. Grease trap should be cleaned when 25% of the liquid level in it is filled with FOG. However, if grease and solids in the trap’s final compartment accumulate to half or more of the height of the grease tap in less than three months, then it must be cleaned at the earliest possible. 

3. MAINTAINING HIGH STANDARDS IN ALL INDUSTRIAL CLEANING SERVICES Commercial grease traps are typically located outside of the main building and must be cleaned on a regular basis. Grease trap cleaning services by Solo Resource Recovery ensure that your grease trap is cleaned with professional expertise and tailored to the specific location of each project. The company uses high-pressure water-jetting technology to restore your infrastructure to its original state quickly. With its quality control measures and site audits, Solo Resource Recovery’s grease trap cleaning services maintain high standards in all industrial cleaning services. The crew uses environment-friendly terms of products and services and uses industrial-grade equipment that can handle grease trap cleaning projects of any complexity.

4. REMOVING WASTE FROM THE GREASE TRAP  Solo’s team providing grease trap cleaning services follows a structured process to clean your grease trap. To avoid damage to grease trap’s lid gasket, the staff removes it slowly. The trap is then measured with a ruler to know how many inches of grease is present. After that, a pump is used by the grease trap cleaning services to remove water from the grease trap. The operator will then scale the bottom, sides, and lid of the machine to remove any excess grease. The procedure adopted by grease trap cleaning services prevents the rapid accumulation of debris that has been knocked loose but not yet removed. The grease trap will be scrubbed in the same area, the screens will be flushed, and water will be reintroduced into the grease trap. Any removed parts will be properly reinstalled, and the lid replaced.  Your local water authority will set the frequency of cleaning your grease trap and pumping out grease and sludge from it. The frequency of grease trap cleaning services will depend on the nature and volume of wastewater produced by your business. Grease traps ranging in capacity from 400 liters to 5000 liters will necessitate the use of professional equipment and trained personnel with experience in grease trap cleaning services. 

5. Some of the benefits of grease trap cleaning services are: • Avoid costly repairs due to blocked drains and pipes  • Prevent a lawsuit from nearby damage for negligent damage to their property  • Avoid a bad review from a customer who smelled foul  • Avoid revenue loss due to the shutdown of a dining room  • Avoid an enforcement action by the council due to code violation 

6. CLEANING SERVICES FOR ALL TYPES OF GREASE TRAPS  Solo Resource Recovery’s grease trap cleaning services use professional equipment and clean your grease trap to keep it in compliance with all local codes and regulations. You will be able to avoid a chargeback from the council. It is the responsibility of each business owner to keep their grease trap clean, and also proper disposal of FOG removed from it. Solo Resource Recovery provides one-stop solutions for grease trap cleaning services for all sizes of grease traps, with proper documentation of all work, hauling, and disposal to support your compliance requirements.  Solo Resource Recovery also provides its septic tank cleaning services to households and council waste services throughout Australia, including Adelaide, Dandenong, Kings cliff, Morning ton, Northern Rivers, and more. Solo Resource Recovery is also skilled in a variety of industrial services including CCTV inspection, liquid waste disposal, non-destructive digging, Geotech pavement investigation, emergency response & spills, and more. 

7. Thanks! Do you have any questions? INFO@SOLO.COM.AU 0266747656 www.solo.com.au