The Camera Selection Buttons change their color depending on the operation condition.

1. ５ ２ ３ ４ ４ ４ ４ １ １ PLAY/PAUSE Button Shuttle Ring STOP Button Jog Dial ６ ７ ８ ９ ９ ９ ９ １０ １０ １１ １０ Monitor Switch Button [12] Button SET Button １ SEARCH Button SHIFT Button Arrow Button Digital Disk Recorder WJ-HD316 Quick Operation Guide Camera Selection Buttons The Camera Selection Buttons change their color depending on the operation condition. Green: Camera live on monitorOrange: Camera under RecordingBlue: Camera live on monitor and under recording Startup (1)Insert the power plug to an outlet (make sure of the right power source) and turn on the power switch on the rear panel. Startup splash image • The OPERATE indicator will light and the system check will start. The startup splash image to the left will be displayed on monitor 2 and VGA. (2)Press any button on the front panel and the login window will be displayed. * When the auto login is on, live images will be displayed after the system check. (Step 2 to 4 not required) Login window (3)Enter a user name and password by rotating the jog dial to select a character and by pressing the arrow buttons to move the cursor. Cursor movement :Arrow button Character input :Jog dial Number input :Camera selection button (4)Press the SET button to display a live image • When authenticated, a live image will be displayed.

2. Display １ １ ６ ６ 3 1 2 1 Monitor of live images (1) Press the MONITOR 1 / MONITOR 2 button to select the monitor When monitor 1 is selected the indicator will light. When monitor 2 is selected the indicator will not light. (2) Press a camera selection button Please check that the SHIFT button is not lit before pressing the camera selection button. Live images from the selected camera will be displayed and the respective camera selectionbutton will light green or blue. Monitor 1 : Display of live images only ※The setup menu is displayed only on monitor 2. ● Camera Title Camera Title Display Displays the edited camera title. Selectable positions: Upper left, upper right, lower left, lower right (Default), center. Time / Event Display ● Time Display Displays the current time and date. Selectable positions: Upper left (Default), upper right, lower left, lower right, center. Camera title ● Event Display Displays an alarm when an alarm occurred. Selectable positions: Upper left, upper right (Default), lower left, lower right, center. Event display depending on event. VMD-* : When motion is detected by the motion detection function LOSS-* : When video loss has occurred COM-# : When a command alarm is supplied from a PC connected to the SERIAL connector on the rear panel of this unit. TRM-# : When a signal is supplied form an external device such as a door sensor to the ALARM terminal. （*: Camera number, #: Event number） Monitor 2, VGA Monitor: Display of live or recorded images (and setup menu) ● Camera Title Camera Title Displays the edited camera title. Selectable positions: Upper left, upper right, lower left, lower right (Default), center. ● Task Bar Displays the current status. The task bar consists of the main bar, the left bar and the right bar. There are 3 different ways to display the task bar as follows. Style 1: Displays only the main bar and the status is displayed on it. Style 2: Displays the status on the main bar, the left bar and the right bar. Style 3: Displays the status only on the main bar, and does not display information on the left and right bar. Right bar Left bar ■Status on the Task Bar Main bar Live/Playback Time Display Area Status Display Area Error Display Area Copy / Delete Icons Alarm Display Area

3. Playback (1) ３ ３ ４ ４ ９ ９ １０ １０ １１ １１ １０ １ Search and Play (1)Press the SEARCH button repeatedly until the recording event list window is displayed. • Use the arrows button ( ) to switch displaying the list and the • thumbnail window alternately. Recording Event List Window Recording Event Thumbnail Window Recording Event List Window Display of the Number of the listed data. Display of Camera channel of the recorded image and of the recording Mode. Display of Time and Date when recording started. (2) Use the arrows button ( ) to select a searching filter (TIME &DATE, CAMERA, EVENT, TEXT), press the SET button When a searching filter is selected, the respective searching filter window will be displayed. Select UNLOCK FILTER and press the SET button to cancel the selected filter. (3)Filter recording events. By time and date By camera and channel Move the cursor using the arrows button and rotate the jog dial to enter time and date. Press the SET button to determine the selection. Select camera channel numbers using the arrows button to apply filtering and complete by pressing the SET button. By recording event By text information Move the cursor to select the recording event using the arrows button and rotate the jog dial to ON. Press the SET button to determine the selection. Rotate the jog dial to select OFF, WITH TEXT or WITHOUT TEXT. Press the SET button to determine the selection. (4) Rotate the jog dial to select a recording event to be played and press the PLAY/PAUSE button. The LISTED indicator and the indicator on the PLAY/PAUSE button will light and playback of the selected recording event will start.

4. Playback (2) ３ ３ ４ ４ ７ ８ ３ ３ ８ ７ １１１ １１ ２ Searching for a marked point and play from that point Note: Searching for a marked point, requires preliminary setting of a mark at a replay position ● About Marking Marking list window ・ Marking allows to “mark” a replay position for easier data retrieval. ・ Date and time of marked points are displayed on the marking list. ・ Up to 100 points can be marked. When more than 100 points are marked, the oldest marked point will be overwritten by the new marked point. ・ When marked while displaying in multi-screen, the same numbers of split screens will be counted as marked points. (Marking on a 16-screen: 16points will be marked simultaneously) (1) Press the PLAY/PAUSE button to start playback (2) Press the SHIFT button. The SHIFT indicator will light. (3) Press the camera selection button [12] at a desired point to be marked during playback. (1)Press the SEARCH button repeatedly until the marking list window is displayed. (2)Rotate the jog dial to select a desired marked time (3)Press the PLAY/PAUSE button 　・The LISTED indicator and the indicator on the PLAY/PAUSE button will light, and playback of the recorded image from the selected marked time will start.

5. Useful Functions ５ ５ ５ １ １ １ ４ ４ ７ ６ ６ ７ ７ １０ １０ ２ ３ １ Multi Screen (1)Press the [Monitor] Switch button to select the monitor When monitor 1 is selected, the indicator will light When monitor 2 is selected the indicator will not light (2)Press the [Shift] button 　・The SHIFT indicator will light (3)Press a camera selection button (1~6) to select a desired multiscreen Button 1: 4-split screenButton 2: 7-split screen Button 3: 9-split screenButton 4: 16-split screen Button 5: 10-split screenButton 6: 13-split screen (4)To return to a single screen display press the SHIFT button. The SHIFT indicator will go off. Press any of the camera selection buttons. Fast forward / Fast reverse ●Rotating the shuttle ring will change the playback speed. Clockwise rotating: fast forward Counterclockwise rotating: fast reverse • Depending on the degree of rotation the speed will change in 6 steps • (1/2x, 1x, 2x, 5x, 10x, 20x). • When the shuttle ring is held in the 20x position for 5 sec., • the playback speed will be 50x. • When the shuttle ring held 5 more sec. after the playback speed became 50x, • the playback speed will be 100x. • To play at normal speed, release the shuttle ring. ●Press the SET button while holding the rotated shuttle ring to hold a desired playback speed. • To return to the normal playback speed, press the SET button. Skip ●Rotating the jog dial during playback will skip to the next or previous recorded image and start playback Clockwise rotating: skip to start time of next recording. Counterclockwise rotating: skip to the start time of the previous recording. • If there is no next or previous recorded image, current playback will continue.

6. View images from PC ２ １ How to display the operation window (1)Start up the PC and the Web browser Browser window (Please use Internet Explorer 5.5 SＰ2 or 6.0) (2)Enter the IP address set to this WJ-HD316 in the address box and press the enter key. User authentication window (3)Enter the user name and password registered on this unit and click on the LOGIN button About the operation window Current time/play time display area During live play display of the current time. During playback display of the play time. Status display area Current status such us playback status or recording status will be displayed. Image display area Recorded images and live images will be displayed. The setup menu will be displayed while setting up. Playback point operation area Control tab It is possible to mark playback points or skip to the latest recorded image. The switcher functions such as switching camera channels or displaying sequentially, are operable on this page. Search results of log information will also be displayed on this page. Camera tab Setup tab Controlling cameras by zooming, focusing and auto panning can be performed on this page. Operations for setup of this unit can be performed on this tab. Refer to Network Setup Instructions for further information. HDD tab Operation for recorded images such as playback or downloading (saving) recorded images can be performed on this page.

7. Troubleshooting Indication Cause / Instructions ALT-* Recorder image has been altered. Playback will be paused. Press the ALARM RESET button to cancel the error status. Press the PLAY/PAUSE button to resume playback. SMART The hard disk may be malfunctioning and may not work correctly. Press the ALARM RESET button to cancel the warning status. Contact the dealer to replace the hard disk. H-METER The set time for the HOUR METER has passed. It may be reaching the end of the hard disk’s lifetime. Press the ALARM RESET button to cancel the warning status. Contact the dealer to replace the hard disk. THERMAL Thermal error of the unit or the optional extension unit has been detected. Press the ALARM RESET button to cancel the warning status. If thermal errors occur frequently, the unit may be malfunctioning. Contact the dealer. POWER The power outage alert signal is supplied from the UPS. When the internal processing starts, recording will stop and all operations will be invalid. Press the ALARM RESET button to cancel the warning status. The unit will start operation automatically after the UPS start power supply. #-nn% (available disk space low) #-FULL (no available disk space) The hard disk is almost full or completely full. Press the ALARM RESET button to cancel the error or the warning status. Initialize or replace the hard disk. When initialized, all recorded date will be deleted. It is recommended to copy the data using an external recording device. MEDIUM-n The external recording device is not operable because no disk or different format disk has been inserted, etc. Press the ALARM RESET button to cancel the warning status. Confirm that a disk has been inserted, or check the inserted disk format. REMOVE An error has occurred on the hard disk and the hard disk has been unmounted from the system automatically. Press the ALARM RESET button to cancel the error status. Contact the dealer. FAN The fan of this unit or the optional extension unit is malfunctioning. It may produce an increase in temperature in the unit and cause malfunction of the HDDs. The warning status will be canceled automatically after around 10 minutes of recovery. Contact the dealer. 1 2 Digital Disk Recorder WJ-HD316 Home Page Before requesting repair check the Troubleshooting List in the Operating Instructions Error Messages If one of the following error message is displayed, follow the instructions listed below. * : Camera number # : Partition number nn: Available disk space (percentage) n : Port number to which an external recording device is connected http://panasonic.co.jp/pss/hd300/en/index.html Distributed by: CG040310 Version 1.0