1 / 46

INHALABLE PARTICULATE MATTER

INHALABLE PARTICULATE MATTER. SAMPLING OPTIONS FROM SKC INC. A GLOBAL DISCONNECT. Global differences in definitions of workplace contaminants and standard sampling methods for those contaminants create a variety of problems. GLOBAL DIFFERENCES IN DEFINTIONS.

steel-joseph
Télécharger la présentation

INHALABLE PARTICULATE MATTER

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. INHALABLE PARTICULATEMATTER SAMPLING OPTIONS FROM SKC INC

  2. A GLOBAL DISCONNECT Global differences in definitions of workplace contaminants and standard sampling methods for those contaminants create a variety of problems.

  3. GLOBAL DIFFERENCES IN DEFINTIONS • Complicate international comparisons and sharing of data • Make our profession seem illogical to lay people including legislators • Contribute to differences in worker protection in different countries • Complicate the choice of sampling equipment

  4. GLOBAL DIFFERENCES IN SAMPLERS • Result in considerable differences in exposure measurements when sampling the same contaminant under identical environmental conditions.

  5. A COMMON SENSE APPROACH • Since we are interested in health effects, researchers sought to design a personal sampler that would be based “on a biologically relevant definition of total dust, that is, one which represents the total of what the worker takes in through the nose and/or mouth during the act of breathing”. (Ann. Occup. Hyg. Vol. 30, 1986.)

  6. HISTORICAL EVENTS A Move Toward Standardization • ACGIH • ISO • CEN

  7. HISTORICAL EVENTS • In 1982, ACGIH appointed an ad hoc committee on Air Sampling Procedures (ASP) with the task of preparing recommendations for size-selective sampling that would lead to an approach for establishing particle size-selective TLVs for particulates.

  8. HISTORICAL EVENTS • In 1983, ISO published Technical Report 7708 giving definitions of particle size fractions corresponding to three regions of the respiratory tract. The fraction which would be measured would depend on the site of action of the particulate material under study.

  9. HISTORICAL EVENTS • In 1985, ACGIH published a report with a similar proposal to that published by ISO. • In 1987, an ISO Working Group was established to revise TR7708 as an international standard and a CEN Working Group was established to produce a European standard.

  10. HISTORICAL EVENTS • In 1993, revisions to Appendix D of the ACGIH TLV booklet, “Particle Size-Selective Sampling Criteria for Airborne Particulate Matter” were adopted by ACGIH. • Three particulate mass fractions were defined: inhalable, thoracic and respirable.

  11. HISTORICAL EVENTS • U.S. NIOSH nor OSHA have not officially endorsed the three new international particulate definitions in total. • The only published method by U.S. government agencies using inhalable samplers is NIOSH 5700 for formaldehyde on dust specifying an IOM sampler or equivalent.

  12. HISTORICAL EVENTS • The Health and Safety Executive describes the use of inhalable and respirable samplers that meet the new definitions in MDHS 14/3, “General methods for sampling and gravimetric analysis of respirable and inhalable dust”.

  13. HISTORICAL EVENTS • Australia has embraced the new definitions of inhalable and respirable particulate mass in the new drafts of the Australian Standards for sampling and gravimetric determination of inhalable dust (AS 3640) and respirable dust (AS2985).

  14. MOVING FORWARD • Definitions • Performance Specifications • Samplers • Exposure Limits

  15. INHALABLE PARTICULATE MASS • Defined as those materials that are hazardous when deposited anywhere in the respiratory tract • Includes particulate matter that enter the head airways region including the nose and mouth • Also includes materials that can produce systemic toxicity from deposition anywhere in the respiratory system.

  16. INHALABLE SAMPLERS • Meet the inhalability criterion when a personal sampler mounted on the body gives the same measured dust concentration and aerodynamic size distribution as that inhaled by its wearer, regardless of dust source location and wind conditions. • Defined as having a 50% cut-point of 100 microns.

  17. TRADITIONAL FILTER CASSETTES • Do not effectively sample inhalable particulate matter • They significantly underestimate the concentration of larger dust particles from 30-100 m. • The inlets do not effectively capture the larger particles, particles adhere to the cassette walls and sample loss can occur when removing the filters.

  18. INHALABLE SAMPLERS A personal sampler for inhalable particulate was first developed by Mark and Vincent in 1986 at the Institute of Occupational Medicine and licensed for manufacture by SKC.

  19. IOM SAMPLER(SKC Cat. No. 225-70A) Exploded View

  20. USING THE IOM SAMPLERSAMPLE LOGISTICS • Load a 25-mm filter into the cassette using forceps and wearing gloves. • Equilibrate the filter/cassette assembly overnight under controlled humidity conditions then weigh them as a unit. • Allow the assembly to stabilize a few minutes before taking a reading.

  21. USING THE IOM SAMPLERSAMPLE LOGISTICS • Place the IOM cassette/filter assembly into the sampler body, screw on the cover cap, and connect to the pump. • Calibrate the flow rate to 2 L/min using the IOM Calibration Adapter (Cat. No. 225-73) or by placing in a calibration chamber. • Following sample collection, weigh the cassette/filter assembly again following the procedures described above.

  22. USING THE IOM SAMPLERSAMPLE LOGISTICS • Transport clips are available to transport the filter/cassette assemblies to the sampling site or the laboratory (Cat. No. 225-72A).

  23. ADVANTAGES OF THE IOM • Since the filter and cassette are weighed together, all particles which enter through the sampling inlet are part of the analysis. • Any particulate dislodged from the filter due to accidental knocking, will be retained inside the cassette and weighed.

  24. ADVANTAGES OF THE IOM • The collection efficiency gives an acceptable match to the inhalability definition when worn on the lapel as a personal sampler. • The performance is relatively independent of wind speed for particles with aerodynamic diameter up to and including 75 m.

  25. CONCERNS March/April 1999 AIHA Journal article discusses problems of water absorption by plastic IOM cassette and resulting instability of the tare weight RESPONSE SKC has changed the plastic material to address water. adsorption. Do not desiccate Equilibrate under controlled humidity conditions. Consider stainless steel cassettes. WEIGHING ACCURACY OF IOM SAMPLES

  26. NEW IOM RESEARCHBY U.K. HEALTH AND SAFETY LABORATORY • Studied the use of porous polyurethane foams as size-selectors • Placed in the inlet of the IOM sampler • Allow for the collection of inhalable and respirable sub fraction using existing IOM samplers • Followed by gravimetric analysis • Used for a variety of particulates including bioaerosols

  27. IOM SAMPLERWITH MULTIDUST FOAM DISCS • Inhalable • Respirable UNDER STUDY • Thoracic • PM10 • Combination discs New Cassette with Elongated Inlet Required

  28. PUBLICATIONS ON IOMBY HSE LAB • HSE Lab Publication on Foam Discs,Project Leader: L C Kenny • Journal of Aerosol Science,Vol. 30, No. 5, pp. 627-638, 1999 on sampling efficiency with low air movement • AIHA Journal, Vol. 59, pp. 831-841, 1998 on sampling with foams for bioaerosols • Methods for the Determination of Hazardous Substances14, Health and Safety Executive, January 1997

  29. NEW INHALABLE RESEARCHBY UNIV OF CINCINNATI • Button Sampler -Alternative to the IOM sampler for inhalable dust • Inlet is formed from a spherical shell with numerous, evenly spaced holes • Holes act as orifices and provide multidirectional sampling capabilities Cat. No. 225-360

  30. USING THE BUTTON SAMPLERSAMPLE LOGISTICS • Unscrew the sampler inlet and remove the PTFE O-ring. • Place a 25-mm filter on the stainless steel support screen, replace the 0-ring and the sampler inlet. • A filter pore size of 1.0 m or higher is recommended due to the backpressure limitations of personal samplers.

  31. USING THE BUTTON SAMPLERSAMPLE LOGISTICS • Calibrate the Button Sampler to a flowrate of 4 L/min using the calibration adapter (Cat. No. 225-361) or by placing in a calibration chamber. • After sampling, remove the filter for analysis. SKC offers a conductive plastic filter transport case for shipment to the lab. (Cat. No. 225-67)

  32. ADVANTAGES OF BUTTON SAMPLER • Closed-face inlet keeps out large particles • 25-mm filter directly behind inlet avoids transmission losses in sampler • Uniform distribution of holes minimizes sensitivity to wind velocity and direction • Flow rate of 4 L/min for personal sampling increases sensitivity • Can be used for personal or area sampling

  33. AIHA Journal, Vol. 61, 398-404, 2000 on performance characteristics Aerosol Science and Technology, Vol. 28, 247-258, 1998 on effects of wind velocity and direction AIHA Journal, Vol. 58,713-719, 1997 on field testing of sampler Atmospheric Environment, Vol. 29, No. 10, pp. 1105-1112, 1995 on design of prototype PUBLICATIONS ON BUTTON SAMPLERBY UNIV OF CINCINNATI

  34. Effects of wind direction: No significant effects Effects of wind velocity: Lower than for IOM, GSP and 37-mm cassette Accuracy (direction-averaged): Better an 37-mm cassette, comparable to GSP, lower than IOM Precision (direction-specific): Equal or better than IOM, GSP, or 37-mm cassette CONCLUSIONS REPORTEDFor the Button Personal Sampler

  35. ABRASIVE BLASTING • A NIOSH Health Hazard Evaluation indicated that current methods do not provide reliable measurements of worker exposure to lead and other contaminants during abrasive blasting in small confined spaces.

  36. Current sampling methods using 37-mm cassettes often grossly overestimate exposure to very large, noninhalable particulate. In NIOSH HHEs, nearly all of the lead in the samples was due to grit that entered the cassettes due to rebound of grit in confined spaces. ABRASIVE BLASTING

  37. JOURNAL ARTICLE APPLIED OCCUPATIONAL AND ENVIRONMENTAL HYGIENE, Vol. 15, p. 776-772, 2000 on use of Button Sampler with screen for evaluating metal exposures among abrasive blasting workers at four US Air Force Facilities

  38. OTHER INHALABLE SAMPLERS • 7-HOLE SAMPLING HEAD Traditional European method using a 25-mm filter and cassette with an end cap with 7 equispaced inlet holes with flows of 2.0 L/min.

  39. Acrylamide Alachlor Aldrin Asphalt Fume Azinphos-methyl Benomyl Beryllium Borate cpds, Inorganic Butylated hydroxytoluene Calcium sulfate Caprolactam Captan Carbaryl Carbofuran Chlorpyrifos Citral Coumaphos Cresol (all isomers) Demeton (and Demeton-S-methyl) Diazinon Dibutyl Phosphate 2,2-Dichloropropionic acid INHALABLE TLVs2010ADOPTED VALUES

  40. Dichlorvos (DDVP) Dicrotophos Dieldrin Diesel Fuel Diethanolamine Dioxathion Diquat Disulfoton Endosulfan EPN Ethion 2-Ethylhexanoic acid Fenamiphos Fensulfothion Fenthion Ferbam Flour Dust Fonofos Glyoxal Hexahydrophthalic anhydride Iodine and Iodides Isobutyl nitrite Magnesium oxide Malathion Methyl demeton INHALABLE TLVs2010ADOPTED VALUES

  41. Methyl parathion Mevinphos Mineral oil (excluding metal working fluids) Molybdenum (Metal and insoluble cpds.) Monochloroacetic acid Monocrotophos Naled Natural rubber latex as total proteins Nickel, Elemental, Soluble and Insoluble Cpds. Nickel Subsulfide 5-Nitro-o-toluidine p,p-Oxybis (benzene sulfonyl hydrazide) Parathion Particulates Not Otherwise Specified (now a guideline; not a TLV) Phorate m-Phthalodinitrile Ronnel INHALABLE TLVs2010ADOPTED VALUES

  42. Silicon carbide, nonfibrous Sulfotepp (TEDP) Sulprofos Synthetic Vitreous Fibers (Continuous filament) Temephos Terbufos 1,1,2,2-Tetrabromomethane Tetraethyl pyrophosphate (TEPP) Thallium (and compounds, as TI) Thiram Trichlorphon Trimellitic anhydride Vanadium Pentoxide Wood dusts Xylidine (mixed isomers) INHALABLE TLVs2010ADOPTED VALUES

  43. Carbon black Maleic anhydride Manganese (elemental and inorganic cpds., as Mn) Piperazine 4,4-Thiobis (6-tert-butyl-m-cresol) Toluene 2,4- or 2,6-diisocyanate (or as a mixture) INHALABLE TLVs2010 INTENDED CHANGES

  44. DATA CONVERSION??TOTAL TO INHALABLE • Aerosol Classification and Conversion Factor -Dust 2.5 -Mist 2.0 -Foundries 1.5 -Welding 1.0 -Smokes/fumes 1.0 • Published by Werner et. al. in the Analyst, 121:1207

  45. THE FUTURE OF SIZE-SELECTIVE SAMPLING • More inhalable TLVs • New thoracic TLVs • Development of thoracic samplers • Enhanced use of foams as pre-selectors

More Related