Use Wi-Fi with an Ethernet Cable

1. Title: Use Wi-Fi with an Ethernet Cable You can coordinate a Wi-Fi network into your Ethernet-enabled network by just setting a Wi-Fi-enabled wireless Belkin Router into your setup. By utilizing a wireless Belkin Router in your network, you can take out a portion of the Ethernet wired "LAN" associations for all PCs that have a wireless air-card introduced. This tidies up the look of your network and gives a more extensive association run since you can interface by means of Ethernet and Wi-Fi. Step 1: Evacuate the Ethernet cable associated with the Ethernet port situated on the back of your PC. Step 2: Connect that cable to the WAN (Wide Area Network) port situated on the back of the wireless Belkin Router. This gives Internet access to the Belkin Router that is then communicates from the Belkin Router as Wi-Fi. Step 3: Connect an Ethernet cable to the LAN (Local Area Network) situated on the back of your wireless Belkin Router. Utilize port No. 1. Plug the flip side of that cable into the Ethernet port situated on the back of your PC. On the off chance that you anticipate utilizing Wi-Fi with this PC, don't cable it to the Belkin Router with an Ethernet cable. Step 4: Find the Wi-Fi symbol in the lower right apparatus plate on your PC screen. Double tap on the symbol to open the Wi-Fi wizard. Select, "Wi-Fi On" starting from the drop menu to actuate the air-card in the PC. Select your network from the list of accessible networks in you region and select, "Associate." Once the Signal bars on the screen turn green, the PC can then get to the Ethernet modem through the Wi-Fi-enabled Belkin Router. I think this article is good enough to connect wifi with Ethernet cable but if there any sort of issues with your Belkin router or wi-fi or with the process and if you need any help use Belkin Router Customer Service Helpline : 1 888 306 5155