1 / 27

Luminosity measurements with dimuon and single muon reconstruction of Z 0 and W decays

Luminosity measurements with dimuon and single muon reconstruction of Z 0 and W decays. M. Poli Lener. OUTLINE: LHCb apparatus & trigger; Theoretical uncertainty of Z 0 and W production cross section; Pythia settings and MC samples;

sunee
Télécharger la présentation

Luminosity measurements with dimuon and single muon reconstruction of Z 0 and W decays

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Luminosity measurements with dimuon and single muon reconstruction of Z0 and W decays M. Poli Lener • OUTLINE: • LHCb apparatus & trigger; • Theoretical uncertainty of Z0 and W production cross section; • Pythia settings and MC samples; • Performance of the dimuon luminometer (Z0 ); • Performance of the single muon luminometer (W  & Z0 ); • Conclusion Details of this work are published in CERN-THESIS-2006-013 XI Spring School - "Bruno Touschek"

  2. 40 MHz Level-0: pT of m, e, h, g Rough pT ~ 20% Calorimeters Muon system Pile-up system 380 mrad 1 MHz Vertex Locator Trigger Tracker Level 0 objects Level-1: Impact parameter 15 mrad 40 kHz HLT: Final state reconstruction Full detector information 2kHz output LHCb spectrometer

  3. Two approaches have been investigated to perform luminosity measurements at LHCb by measuring: • vertices of beam-gas interaction through the VELO detector (*) • event rates of physical channels with a well known and sizeable cross section (*) L. Ferro-Luzzi, CERN-PH-EP/2005-023 Luminosity measurements at LHCb Motivations: Relative Luminosity: • Correct for systematic effects Reconstruction and trigger efficiencies • Control the stability of the hardware • Stability of colliding beam conditions Absolute luminosity: • Measure (and publish) cross section: - bb inclusive production - prompt charm - weak boson production - constrain Parton Distribution Functions from EW processes • Measure absolute BR of Bs

  4. MRST 99, 00 PDF sets NNLO QCD 5%  x B.R. (nb)  x B.R. (nb) 5%  x B.R. (nb) W B.R.(W) 10 xzB.R.(Z+-) W.L.van Neerven et al., Nucl. Phys. B382 (2000) 11 W.J. Stirling et al., Eur. Phys. J. C18 (2000) 117 Theoretical uncertainty Two physical channels are investigated to perform an “on-line” luminometerat LHCb due to theoretical accuracy (~ 4%) and sizeable cross sections at s = 14 TeV

  5. V annihilation Compton scattering V V QCD radiation (LO) (NLO) (NLO) (NLO) V QED radiation Pythia settings • The diagrams for the boson V (Z0 and W) production are: • PDF CTEQ4Lis used • The initial state radiation are switched off • Only Z0 neutral current  interference in matrix elements of Z0/* and * are disabled • A polar angle  400 mrad is required to the leptons decaying from bosons

  6. The annual signal yield will be, assuming Lint =2 fb-1 (1 y =107s & <L > = 2x 1032 cm-2 s-1): Sz = Lintx  2 tot x (Z x B.R.) 2 where:  2 tot= (genx recx selx trig) 2 (Z x B.R.) 2 2 nb S1 = Lintx 1tot x ( x BR) 1 where:  1tot= (genx recx selx trig) 1 ( x BR) 1tot= (Z x BR) +(W x BR)  22 nb The performances of these two physical processes can be compared Monte Carlo Samples Single muon coming from W and Z0 decay (single-muon luminometer) 50 kevents of W± ±  5 kevents of Z0  (with a  not reconstructed) Z0 +- decay process (dimuon luminometer) 25 kevents of Z0 

  7. Performance of the dimuon luminometer

  8. Acceptance: 4 vs 400 mrad Future work For the next, I will assume the W  and Z  decays have the same geometrical acceptance efficiency In order to evaluate the generation efficiency (gen) in [0, 400] mrad a small pre-production of  4 kevents of Z0 +- have been generated in 4 1 vs 2

  9. All the production cross section have been evaluated at NNLO (*) Dimuon selection algorithm The strategy of the selection algorithm is a compromise between a high efficiency on the signal and a large rejection of the background sources • The signal is represented by a couple of muons (lnL> -8) with: • opposite charge • low significance (IP/IP) < 5 • high pT > 10 GeV/c Background processes 60 These cuts together with the large di-muon invariant mass are able to totally rejects~15x106 of minimum bias and ~8x106 of b inclusive events. The first two physical channels (Z0 +- & ttW+ W-) are not yet generated: Z0 +- decay could be rejected requiring an IP cut due to c(tau) ~ 100 m, while the ttW+ W- contribution to the signal is at most ~4‰ considering their cross section x B.R.  8 pb against 2 nb of the signal (*) N. Kidonanakis et al., hep-ph/0410367

  10. 380 mrad 16 mrad Asymmetric distribution due to radiation in the final state Dimuon invariant Mass GeV/c2 Dimuon luminometer efficiencies & results The total signal efficiency  2 tot= (genx recx selx trig) 2 can be computed

  11. Performance of the single muon luminometer

  12. Background processes All the production cross section have been evaluated at NNLO(*) Single muon selection algorithm The signal is given by single muon events coming from W or Z0 (with a  not reconstructed) 3520 320 The first three physical channels (W,Z0 +-, ttW+ W-) are not yet generated: W and Z0 +- decays could be rejected requiring an IP cut due to c(tau) ~ 100 m, while the ttW+ W- contribution to the signal is at most ~ 4‰ considering their cross section x B.R.  ~70 pb of the BG against ~ 22 nb of the signal The minimum bias events are not taking into account because ~99% events are rejected with the previous “smooth” selection cuts (*) N. Kidonanakis et al., hep-ph/0410367

  13. Signal • Background • Signal • Background To achieve a systematic uncertainty below 4%, a S/B ratio > 25 is needed 22 nb pT spectra IP/IP 500 b  conservative pT > 30 GeV/c Single muon selection algorithm The single muon selection algorithm is applied on background (~ 8x106 bb inclusive) andsignalevents Selection • vertex reconstructed with IP/sigma < 3 • pT cut

  14. Single muon luminometer efficiencies & results The total signal efficiency 1tot= (genx recx selx trig) 1can be calculated

  15. To perform an “on-line” luminosity measurement with an uncertainly < 4%, 700 events must be collected during data taking ~ 31/2 hours ~ 45 minutes Comparison of luminosity measurements The performances of thesetwo samples can be compared S1 = Lintx 1tot x ( x BR) 1 with: 1tot= 6.1 % ( x BR) 1tot= 22.13 nb Sz = Lintx  2 tot x (Z x B.R.) 2 with:  2 tot= 14.3% (Z x B.R.) 2 1.86 nb The final annual yield (Lint= 2 fb-1) is 5.3x105selected & triggered events  bandwidth of 53 mHz  Z0 +- event every ~ 20 s 2.7x106selected & triggered events  bandwidth of 270 mHz  Z0 or W muon decays every ~ 4 s

  16. Spares XI Spring School

  17. A new L1 specific algorithm, based on a IP < 0.15 mm and a pT > 10 GeV, is introduced in the L1Decision package (v4r5) L1 Trigger algorithms XI Spring School

  18. L1 Trigger algorithms & results • The addition of the new L1 specific algorithm, called low IP muon • reaches a L1 efficiency on the Z0  signal up to ~ 85% comparable tothat obtained with other dimuon processes such as theB0s→J/(µµ)  • requires a limited bandwidth in order to not upset the L1 streaming. The bandwidth can be computed looking at the muons coming from the bb inclusive events which pass L0&L1 trigger (without any selection cuts) •  a negligible value of ~ 50 Hzis obtained XI Spring School

  19. Used by the dimuon luminometer HLT Trigger data flow XI Spring School

  20. Parton Distribution Function • New PDF sets have been recently updated considering the more recent data from H1 and ZEUS at HERA and CDF and D0 at Tevatron: • Alekhin(*) • CTEQ6(**) • MRST2004(***) • ZEUS2005 All these PDFs estimate an uncertainty on the Z and W boson production cross sections of  2÷3 % (*) S.I Alekhin, hep-ph/0508248 (**) J.Pumplin et al., A.D. Martin et al, hep-ph/0201195 (***) A.D. Martin et al, hep-ph/0507015 XI Spring School

  21. Pythia results ========================================================== I I I I I Subprocess I Number of points I Sigma I I I I I I------------------------------------------------I---------------------------------I (mb) I I I I I I N:o Type I Generated Tried I I I I I I ========================================================== I I I I I 0 All included subprocesses I 7047 120254 I 3.010E-05 I I 1 f + fbar -> Z0 I 2088 10232 I 8.917E-06 I I 15 f + fbar -> g + Z0 I 2596 72079 I 1.127E-05 I I 19 f+ fbar -> gamma + Z0 I 29 743 I 1.260E-07 I I 30 f + g -> f + Z0 I 2334 37200 I 9.787E-06 I I I I I ========================================================== XI Spring School

  22. <x1> = 0.1 <x2> = 2.5*10-4 Parton momentum distributions From S. de Capua PhThesis http://sdecapua.home.cern.ch/sdecapua/ XI Spring School

  23. UP & UPbar distributions vs PDF sets (Q2=104 GeV2) XI Spring School

  24. DOWN & DOWNbar distributions vs PDF sets (Q2=104 GeV2) XI Spring School

  25. STRANGE & CHARM distributions vs PDF sets (Q2=104 GeV2) XI Spring School

  26. BOTTOM & GLUON distributions vs PDF sets (Q2=104 GeV2) XI Spring School

  27. Signal • Background 2 track Single muon selection algorithm The single muon selection algorithm is applied on background (~ 8x106 bb inclusive) andsignalevents • Pre-selection • particles identified as muons  lnL> -2 (standard lnL> -8 ) • well reconstructed tracks  2-track < 2.5 • Signal • Background lnL hypothesis XI Spring School

More Related