1 / 74

CCNA Voice 640-461 Cert Guide

CHAPTER 7 Configuring Cisco Unified CME Voice Productivity Features. CCNA Voice 640-461 Cert Guide. Configuring a Voice Network Directory: Create a name to appear on the screen to indicate line using the Router(config-ephone-dn)# label command

swhitehead
Télécharger la présentation

CCNA Voice 640-461 Cert Guide

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CHAPTER 7 Configuring Cisco Unified CME Voice Productivity Features CCNA Voice 640-461 Cert Guide

  2. Configuring a Voice Network Directory: • Create a name to appear on the screen to indicate line using the Router(config-ephone-dn)#label command • Create a name to appear in the phone directory using the Router(config-ephone-dn)#name command Router(config)#ephone-dn 20 Router(config-ephone-dn)#name Joshua Bellman Router(config-ephone-dn)#label Joshua Bellman Router(config-ephone-dn)#ephone-dn 21 Router(config-ephone-dn)#name Ruth Hopper Router(config-ephone-dn)#label Ruth Hopper Router(config-ephone-dn)#ephone-dn 24 Router(config-ephone-dn)#name Samuel Oldham Router(config-ephone-dn)#label Samuel Oldham Router(config-ephone-dn)#end

  3. Configuring a Voice Network Directory: • Configuring buttons to ephone-dn’s • Configuring the order of names in directory Router(config)#ephone 1 Router(config-ephone)#button 1:21 2:22 Router(config-ephone)#ephone 2 Router(config-ephone)#button 1:22 2:23 Router(config-ephone)#ephone 3 Router(config-ephone)#button 1:23 2:21 Router(config-ephone)#telephony-service Router(config-telephony)#directory last-name-first Router(config-telephony)#directory entry 1 1599 name Corporate Fax Router(config-telephony)#reset all Router(config-telephony)#end

  4. Configuring Call Forwarding: • Forward all calls • Forward if busy • Forward max-length • Forward night-service • Forward no answer • Forward all calls on either line if it is a dual-line ephone-dn regardless of phone status • Forward calls only if line is in use. Call waiting will still function if it is a dual-line ephone-dn • Allow only a maximum number of digits when forwarding a call (extension length). Stops call transfer from outside to inside to outside

  5. Configuring Call Forwarding continued: • Forward all calls to a night service attendantRouter(config-ephone-dn)#call-forward night-service 98251000 • Forward calls after a set time (number of rings) to another extension (use “timeout” command) Router(config-ephone-dn)#call-forward noan 1502 timeout 25 • Forward all calls if busy Router(config-ephone-dn)#call-forward busy 1502 • Note: “1502” may be an answering machine or another extension.

  6. Configuring Call Forwarding continued: • Router(config-telephony)#call-forward pattern [sequence] • This command allows you to enter a pattern for numbers that will support the H.450.3 call forwarding standard. • The use of H.450.3 will stop the condition of “hairpinning” • Router(config-telephony)#call-forward pattern 15.. Tells the CME that all numbers of four digits that starts with 15 to support H.450.3

  7. Configuring Call Transfer: • Full-consult: H.450.2 / SIP call transfers using a second line if available, fallback is Full-blind if unavailable • Local-consult: Works as Full-consult but is Cisco proprietary • Full-blind: Forward without consult using H.450.2 or SIP • Can be configured globally or locally • Configure transfer pattern to limit call forwarding Router(config)#telephony-service Router(config-telephony)#transfer-system full-consult Router(config-telephony)#ephone-dn 2 dual-line Router(config-ephone-dn)#transfer-mode full Router(config-ephone-dn)#telephony-service Router(config-telephony)#transfer-pattern 5… Router(config-telephony)#transfer-pattern 9………..

  8. Configuring Call Park (On-Hold): • Can use any unused ephone-dn slots • Can be set to use specific ephone-dn slots Router(config)#ephone-dn 50 Router(config-ephone-dn)#number 3000 Router(config-ephone-dn)#name Maintenance Router(config-ephone-dn)#park-slot Router(config-ephone-dn)#ephone-dn 51 Router(config-ephone-dn)#number 3001 Router(config-ephone-dn)#name Engineering Router(config-ephone-dn)#park-slot timeout 60 limit 10 recall

  9. Configuring Call Park (On-Hold): • Options for the park-slot option: • reserved-for: can be reserved for the directory number entered • timeout: number of seconds CME waits before notification that a call is still parked • limit: limits the number of timeout intervals after which the call is disconnected • notify: notifies a different dn in addition to the originating dn that the call is parked when the timeout period is reached • only: used with the notify command to specify that only the specified dn will be notified and not the originator when the timeout is reached • recall: causes the call to return to the original phone that parked the call after the timeout period has expired • transfer: causes the call to transfer to a specific dn after the timeout period has expired • alternate: allows the call to be transferred to an alternate dn should the first be in use • retry: sets the amount of times CME should cycle through the timeout period attempting to transfer the call

  10. Configuring Call Park (On-Hold): • To answer a parked call: • Dial directly into the parked slot • Press the PickUp softkey and dial the park number • From the parking phone press the PickUp softkey and press the * to recall the parked call

  11. Configuring Call Pickup: • When staff is limited (nights, weekends, holidays) one phone may pickup calls for multiple extensions Router(config)#ephone-dn 1 dual-line Router(config-ephone-dn)#pickup-group 5509 Router(config-ephone-dn)#ephone-dn 2 dual-line Router(config-ephone-dn)#pickup-group 5509 Router(config-ephone-dn)#ephone-dn 3 dual-line Router(config-ephone-dn)#pickup-group 5509 Router(config-ephone-dn)#ephone-dn 4 dual-line Router(config-ephone-dn)#pickup-group 5510 Router(config-ephone-dn)#ephone-dn 5 dual-line Router(config-ephone-dn)#pickup-group 5510 Router(config-ephone-dn)#ephone-dn 6 dual-line Router(config-ephone-dn)#pickup-group 5510

  12. Configuring Intercom: • Can broadcast out to many phones in the group using the speakerphone (example: “Mr. Clark you have a call on 6000.”) • Can be configured for a speed-dial number using a character that cannot be dialed (A100) or a dial able extension (7777). Router(config)#ephone-dn 80 dual-line Router(config-ephone-dn)#number A100 Router(config-ephone-dn)#intercom A101 label “Manager” Router(config-ephone-dn)#ephone-dn 81 dual-line Router(config-ephone-dn)#number A101 Router(config-ephone-dn)#intercom A100 label “Assistant” Router(config-ephone-dn)#ephone 1 Router(config-ephone)#button 2:80 Router(config-ephone)#reset Router(config-ephone)#ephone 2 Router(config-ephone)#button 2:81 Router(config-ephone)#reset

  13. Configuring Intercom continued: • Options: • barge-in: Places any existing call on hold and proceeds to use intercom function • no-auto-answer: Causes the phone to ring rather then auto-answer on speakerphone • no-mute: Causes the intercom to answer with un-muted speakerphone rather then muted

  14. Configuring Paging: • Can group together phones in a paging group or multiple groups • Uses speakerphone to broadcast message Router(config)#ephone-dn 80 Router(config-ephone-dn)#number 5555 Router(config-ephone-dn)#paging Router(config-ephone-dn)#ephone-dn 81 Router(config-ephone-dn)#number 5556 Router(config-ephone-dn)#paging Router(config-ephone-dn)#ephone 1 Router(config-ephone)#paging-dn 80 Router(config-ephone)#ephone 2 Router(config-ephone)#paging-dn 80 Router(config-ephone)#ephone 3 Router(config-ephone)#paging-dn 81 Router(config-ephone)#ephone 4 Router(config-ephone)#paging-dn 81 Router(config-ephone)#ephone-dn 82 Router(config-ephone-dn)#number 5557 Router(config-ephone-dn)#paging-group 80,81

  15. Configuring Paging continued: • Dial 5555 for group 80 • Dial 5556 for group 81 • Dial 5557 for both groups

More Related