1 / 15

Neodymium:YAG Laser

Neodymium:YAG Laser. Nd 3+ in yttrium-aluminum-garnet (Y 3 Al 5 O 12 ) Four level laser Powerful line @ 1064 nm; often doubled or tripled Pump: Kr/Ar arc lamp or flash lamp CW or pulsed operation. Ingle and Crouch, Spectrochemical Analysis. Diode LASERs.

taffy
Télécharger la présentation

Neodymium:YAG Laser

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Neodymium:YAG Laser • Nd3+ in yttrium-aluminum-garnet (Y3Al5O12) • Four level laser • Powerful line @ 1064 nm; often doubled or tripled • Pump: Kr/Ar arc lamp or flash lamp • CW or pulsed operation Ingle and Crouch, Spectrochemical Analysis

  2. Diode LASERs • Conversion of electrical to optical power up to 30%. • Polished faces of semiconductor act as mirrors and reflect ≈95% of photons from leaving resonance cavity. McCreery, R. L., Raman Spectroscopy for Chemical Analysis, 3rd ed., Wiley, New York: 2000

  3. Stimulated Emission Agrawal, G.P.; Dutta, N.K. Semiconductor Lasers, Van Nostrand Reinhold, New York: 1993.

  4. Semiconductor (Diode) Laser Used in telecommunications, CD players, laser pointers etc. Blue and UV (375 – 400 nm) diode lasers have recently been developed. Eli Kapon, Semiconductor Lasers I, Academic Press, San Diego, 1999.

  5. Semiconductor (Diode) Laser Eugene Hecht, Optics, Addison-Wesley, Reading, MA, 1998.

  6. Diode LASER Output McCreery, R. L., Raman Spectroscopy for Chemical Analysis, 3rd ed., Wiley, New York: 2000

  7. He – Cd Laser For lasing to occur, cadmium must be heated sufficiently to obtain and maintain the proper partial pressure of cadmium vapor in the discharge tube. The vapor is propagated through the system by cataphoresis (cadmium cations are transported by discharge through the laser bore towards the cathode). Once the cadmium vapor leaves the bore region, it coalesces on any cool surface. www.mellesgriot.com

  8. Ion Lasers (Ar+ and Kr+) CW – pumped using an electrical discharge. Very reliable. Inefficient because energy is required to ionize gas. Power up to ~40 W (distributed over many lines). Argon ion is most common. 488 nm and 514 nm are most powerful lines. Cluster of ~10 lines in 454 – 529 nm. UV: 334, 352, 364 nm (need several W in visible to get ~50 mW in UV) Deep UV: 275 nm (need 20-30 W in visible to get ~10mW @ 275 nm)

  9. Excimer Lasers Excimer is a dimer that is only stable in the excited state. e.g. ArF+, KrF+, XeF+ Pass current through noble gas / F2 mix. Lasing occurs as excimer returns to the ground state. Ingle and Crouch, Spectrochemical Analysis

  10. Dye Lasers Molecular transitions in the solution phase. Active species is an organic dye (e.g. rhodamines, coumarins, fluoresceins). To prevent overheating, a jet of the dye solution is pumped through focal point of optical system. Broad transitions. Can be tuned over ~50 nm. Lases in UV-Vis-IR Difficult and expensive to operate. Optically pumped with flashlamp or another laser. Ingle and Crouch, Spectrochemical Analysis

  11. Dye Lasers Demtröder, W. Laser Spectroscopy, Springer, Berlin: 1996.

  12. CW Dye Laser with Second Harmonic Generation (SHG) • Ring laser with two focal points. • Ar ion laser (515 nm) for pumping. • Dyes with absorption maxima at 595 to 700 nm. • Dye jet is positioned at one focus and the second harmonic generating crystal (LiIO3) resides at the other. • Output at about 300 nm. • Cavity expansion plates allow tuning. Myers, A.B.; Rizzo, T.R. Laser Techniques in Chemistry, Wiley, New York: 1995.

  13. Dye Lasers Molecular transitions in the solution phase. Active species is an organic dye (e.g. rhodamines, coumarins, fluoresceins). To prevent overheating, a jet of the dye solution is pumped through focal point of optical system. Broad transitions. Can be tuned over ~50 nm. Lases in UV-Vis-IR Difficult and expensive to operate. Optically pumped with flashlamp or another laser. Ingle and Crouch, Spectrochemical Analysis

  14. Tunable Lasers E.g. Emerald laser Be3Al2Si6O18:Cr3+ (720 to 842 nm) E.g. Titanium sapphire laser (650 to 1000 nm) E.g. Dye lasers E.g. Solid-state semiconductor lasers E.g. Ar/Kr ion laser: Nine selectable wavelengths (476 to 676 nm). To select a wavelength, the operator turns a calibrated micrometer on the back panel of the laser head, rotating a prism assembly around the optical axis of the laser. www.mellesgriot.com

  15. External Cavity Diode LASER • Diffraction grating selects and stabilizes output wavelength. • Diffraction grating permits tunability over ≈10 nm range. • Isolator reflects ≈95% of photons from diode and prevents stray light from entering resonance cavity. McCreery, R. L., Raman Spectroscopy for Chemical Analysis, 3rd ed., Wiley, New York: 2000

More Related