1 / 28

Introduction to SPICE

Introduction to SPICE. Microelectronics (I). What is SPICE?. S imulation P rogram with I ntegrated C ircuit E mphasis SPICE was developed by U.C. Berkeley in 1970. There are many commercial SPICE programs, such as PSPICE, HSPICE, IS-SPICE, IG-SPICE,.etc. Create netlist. Graph Data

tallulah-cote
Télécharger la présentation

Introduction to SPICE

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Introduction to SPICE Microelectronics (I)

  2. What is SPICE? • Simulation Program with Integrated Circuit Emphasis • SPICE was developed by U.C. Berkeley in 1970. • There are many commercial SPICE programs, such as PSPICE, HSPICE, IS-SPICE, IG-SPICE,.etc.

  3. Create netlist Graph Data output Schematics PSPICE circuits editor Graph Tools (simulation) .sch .dat .cir .net .als PSPICE Data Flow

  4. 檔案說明

  5. description used part You can use hot-key : Ctrl+G

  6. 元件庫說明

  7. You can modify the component attribute by double click the part. Only parameter without ’ * ‘ can be modified. • You can change the component placement direction by hot-key Ctrl+R, or using the dialog “Change Display”.

  8. You can use “Ctrl+W” to draw wires. • Add label for wire -> select the wire then double click. • Select and delete.

  9. Basic Analysis • DC Analysis: 1. Bias point detail 2. DC sweep • Transient Analysis : transient • AC Analysis: AC sweep

  10. Bias point detail • Choose Analysis / setup • Choose Analysis / Simulate

  11. DC sweep 與更改變數的元件名稱相同。

  12. Marker ※測量電流的marker必須在元件端點。

  13. Transient Analysis Initial condition要記得設定。 (參數 IC = ** V)

  14. AC sweep • 電壓源必須要選擇VAC

  15. The Diode Model PSPICE9.1版元件庫中， 有四種二極體模型D1N4004、D1N4148、D1N750 、D1N914。 其中 D1N4148為 Si質二極體。 D1N750 為 Zener Diode。

  16. Diode 近似模型 平常我們在紙上分析電路時，不可能實際地考量diode的物理特性，所以介紹幾個常用的近似模型。 (1) 理想二極體模型 (Ideal Diode Model） (2) 定壓降模型 （Constant Voltage Drop Model） (3) 電池加電阻模型 （Battery Plus Resistance Model）

  17. Exercise 利用PSPICE畫出D1N4148二極體的I-V curve。

  18. 箝位電路（Clamping circuit）

  19. Vsin Parameter

  20. the voltage doubler Clamping circuit The Peak Rectifier (峰值整流器)

More Related