1 / 31

650 MDS

650 MDS. Multiparameter Display System. Outline. Front & Rear Covers Keypad & Characters 650 Main Menu Interfacing with Sonde Setting up a Logging Run Setup Logging Files Collect Data View Data on 650 Download Data to PC and View Data Export Data. Front Cover. Display. On/Off.

talon-griffith
Télécharger la présentation

650 MDS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 650 MDS Multiparameter Display System

  2. Outline • Front & Rear Covers • Keypad & Characters • 650 Main Menu • Interfacing with Sonde • Setting up a Logging Run • Setup Logging Files • Collect Data • View Data on 650 • Download Data to PC and View Data • Export Data

  3. Front Cover Display On/Off Arrow Keys Backlight Key Escape Key Enter Key Handstrap Keypad MS-8 Connector Strain Relief Lanyard

  4. Accessory Connections Battery Lid Screws Barometer Patch Vent Battery Lid Rear Cover

  5. Keypad • 1 = 1 • 2 = ABC2abc2 • 3 = DEF3def3 • 4 = GHI4ghi4 • 5 = JKL5jkl5 • 6 = MNO6mno6 • 7 = PQRS7pqrs7 • 8 = TUV8tuv8 • 9 = WXYZ9wxyz9 • - = Minus/Hyphen • 0 = 0 • . = Period/Decimal Point

  6. Interfacing a 650 with a Sonde • 650 MDS • Integral or Detachable Field Cable • YSI 6-Series Sonde

  7. Operating the 650 Menus

  8. 650 Main Menu Continued... Run Screen Sonde run Directory Upload to PC View file File memory Delete all files Sonde menu File Version Date & Time Power Sonde Baud rate to sonde Shut off time Comma radix ID Circuit Board Serial # Barometer Units Calibrate Barometer Interval Use site list Store Barometer Store Lat and Long Store site number Edit Site List Logging Setup System Setup 650 Flow Chart

  9. Sonde Menu Flow Chart Sonde Menu Discrete Sample Unattended Sample Conductivity DO % DO mg/L Various other Parameters Run Directory Upload to PC Quick Upload View File Quick view file Delete all files Calibrate Version Date Time Bat volts Bat life Free bytes Logging File Status Date & Time Comm setup Page length Instrument ID Circuit Board SN GLP filename SDI-12 address Language System Report “Report setup” includes a list of all enabled sensors. “Sensors enabled” gives a list of all available sensors and shows if they are enabled. Sensor Cal constants Setup Sensor Data filter Advanced

  10. Calibration

  11. 650 Logging Available Memory • Low Memory • 12 File Names • 100 Site Names • High Memory • 35 File Names • 100 Site Names

  12. Logging to the 650Simple Logging • From the Main Menu highlight Logging setup. Press • The ‘Use site list’ should be inactive. • Set the interval to 2 seconds (00:00:02) and press • Press • Highlight Sonde run and press

  13. Logging to the 650Simple Logging • You should now see the Run screen • With 650, “Log one sample” is highlighted

  14. Logging to the 650Simple Logging • Enter “Pond” for a file name and Press • Arrow down and enter site description press • Arrow up to highlight OK and press

  15. Logging to the 650Under Different File Names • Press until you return to the Main Menu • Under Logging Setup, Highlight ‘Use site list’ and press • Highlight ‘Edit Site List’ and press

  16. Logging to the 650Using a Site List • For file name enter “BLUELAKE”. • For each site name and site number, set them up as in the example below:

  17. Logging to the 650Using a Site List • Once your site list is set up, press until you reach the Main Menu. • Highlight Sonde run and press • Select ‘start logging’ under the 650 menu and press

  18. Logging to the 650Using a Site List

  19. Logging to the 650Parameter mismatch

  20. Parameter mismatch • Use this chart to Troubleshoot a Parameter Mismatch:

  21. Additional Hints • Adjust contrast by holding down the BackLight key and pressing the Up / Down arrow keys • When logging directly to 650, make sure report menu in Sonde is setup with what Parameters you wish to capture. • You can log data to Sonde if memory in 650 gets full while in the field.

  22. FILE MANAGEMENT- Viewing Data on 650- Downloading Data from 650 to PC • You will need your PC adapter cable. • From the 650 Main menu, • File • Upload to PC • Select your file name, press

  23. Interfacing a 650 & PC for File Management • 650 MDS • PC Interface Cable • Personal Computer

  24. Open EcoWatchOpen Com PortDownload Data from 650 to PC

  25. Select only the Parameters of Interest

  26. Data Display #1

  27. Data Display #2

  28. Readings on Plot • Readings of any particular point on plot • press and hold the right mouse button

  29. Export Data

  30. Open Excel (find file and open using wizard)

  31. Questions….

More Related