1 / 7

Answer: RMR means Rock Mass Rating.

Question: What do you understand by the term RMR? How it is used for designing a support plan for u/g mine workings. Draw a RMR based support plan for B&P development workings at a depth of 300m. Answer: RMR means Rock Mass Rating.

tanyakrueger
Télécharger la présentation

Answer: RMR means Rock Mass Rating.

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Question: What do you understand by the term RMR? How it is used for designing a support plan for u/g mine workings. Draw a RMR based support plan for B&P development workings at a depth of 300m. Hkkjr dksfdax dksy fyfeVsM

  2. Answer: RMR means Rock Mass Rating. Rock Mass Rating (RMR) is the sum of the five parameter ratings. • Layer thickness 30 • Structural features 25 • Weatherability 20 • Rock strength 15 • Groundwater 10 • If there are more than one rock type, then the combined RMR is obtained as : Σ(RMR of each bed x bed thickness) Combined RMR = ----------------------- Σ (thickness of each bed) Hkkjr dksfdax dksy fyfeVsM

  3. RMR so determined / obtained is further adjusted for various geo-mining conditions such as: • Depth • Lateral Stress • Influence of adjacent and overlying workings • Mode of drivage Finally roof is classified on the basis of adjusted / final RMR as given below: Sl. Range of RMR Class of Roof Description of roof • 0-20 V Very Poor • 20-40 IV Poor • 40-60 III Fair • 60-80 II Good • 80-100 I Very Good Hkkjr dksfdax dksy fyfeVsM

  4. Use of RMR in designing a support plan for underground mine workings: 1. Rock Load is derived with following empirical formula :- Expected rock load = rock density x gallery width x (1.7-0.037 RMR + 0.0002 x RMR2) = 2.215 x 3.6 x (1.7 - 0.037 x 55 + 0.0002 x 55 x 55) = 2.15 te/sq.m supposing gallery width = 3.6m rock density = 2.215 te/m3 ( derived in lab test) Taking factor of safety = 2 Resistance applied = Rock Load X FOS = 2.15 X 2 = 4.30 te/m2 Let Area of Exposure = 3.6m X 2m = 7.2m2 = Hkkjr dksfdax dksy fyfeVsM

  5. Total Resistance required = 4.30 te/m2 X 7.2 m2 • = 30.96 te • suppose one roof bolt takes load of 8 te • Number of roof bolts to be jammed = 30.96/8 • = 4 nos • This way RMR is used for determining the support design. 2. Estimation of Support Load Density(SLD) in depillaring district – RMR is also used to estimate the SLD by following empirical formula: For slice junction, r.H0.50 X K0.64 X W1.17 • SLD = ----------------------- R0.90 Hkkjr dksfdax dksy fyfeVsM

  6. within slice, r. H 0.67 X K 0.84 X W 1.74 • SLD = ------------------------ R 1.42 In the Split Gallery r. H 0.52 X K 0.59 X W 1.12 • SLD = ------------------------ R 1.02 For Goaf Edge r. H 0.54 X K 0.49 X W 0.89 • SLD = ------------------------ • R 0.79 Hkkjr dksfdax dksy fyfeVsM

  7. Where, r = weighted average rock density of the immediate roof (te/m3) • H = depth of cover (m) • K = ratio horizontal to vertical • W = width of split or slice (m) • R = weighted average RMR of the immediate roof rock. 3. Monitoring of Strata Support RMR is also used in calculation of theoretical maximum convergence and convergence velocity of strata • Cm = 40 X B X D 1/3 ( 1-RMR/100)3 (mm)  • Cv = 0.55 X B X D1.7 ( 1-RMR/100)5.6 (mm/day) B = roadway width D = density of roof rock Hkkjr dksfdax dksy fyfeVsM

More Related