1 / 15

4.3 (a) To investigate the effect of pH on amylase activity

4.3 (a) To investigate the effect of pH on amylase activity. Before you start get or make a copy of this Table of results. Step 1. Set up a water bath at 37 °C. Step 2. Place 5 ml starch solution and 3 drops of iodine solution into 3 boiling tubes. Step 3.

tarr
Télécharger la présentation

4.3 (a) To investigate the effect of pH on amylase activity

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 4.3 (a) To investigate the effect of pH on amylase activity

  2. Before you start get or make a copy of this Table of results

  3. Step 1 Set up a water bath at 37 °C.

  4. Step 2 Place 5 ml starch solution and 3 drops of iodine solution into 3 boiling tubes.

  5. Step 3 Put 2 ml amylase solution and 5 ml buffer (4, 7, 9) into three other tubes.

  6. Step 4 Place all tubes into a water bath at 37 °C and leave for 5 minutes.

  7. Step 5 Pour one of the amylase tubes into one of the starch tubes. Gently shake. Repeat for each pH.

  8. Step 6 Replace the tubes in the water bath and measure the time taken for the blue/black colour to disappear.

  9. Graph your results

  10. Step 7 Prepare as for steps 1 and 2 previously Test for sugar: add 1ml Benedict’s solution to each boiling tube and heat for 5 minutes.

  11. Step 8 A brick red colour indicates a reducing sugar is present.

  12. Step 9 Repeat the whole experiment with boiled amylase as a control.

  13. Expected result The enzyme works best at a pH of 7. The blue / black colour faded and Benedicts resulted in a positive test.

  14. Results

  15. END

More Related