1 / 20

Prepared by: Andrew Hall Dept. of Electrical and Computer Engineering Utah State University

ECE5320 Mechatronics Assignment#01: Literature Survey on Sensors and Actuators Topic: Micro Electro-Mechanical Systems (MEMS) sensors. Prepared by: Andrew Hall Dept. of Electrical and Computer Engineering Utah State University E: a.hall@aggiemail.usu.edu. 3/6/2009. Outline.

tegan
Télécharger la présentation

Prepared by: Andrew Hall Dept. of Electrical and Computer Engineering Utah State University

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ECE5320 MechatronicsAssignment#01: Literature Survey on Sensors and Actuators Topic: Micro Electro-Mechanical Systems (MEMS) sensors Prepared by: Andrew Hall Dept. of Electrical and Computer Engineering Utah State University E: a.hall@aggiemail.usu.edu 3/6/2009

  2. Outline • Reference list • Overview • Major applications • Basic working principle illustrated • Applications using MEMS • Major specifications • Limitations • MEMS sensors manufacturers ECE5320 Mechatronics. Assignment#1 Survey on sensors and actuators

  3. Reference list • Roos, Gina, ‘MEMS sensors: good medicine’, www.eetimes.com/news/design/showArticle.jhtml?articleID=205207022 • Torrance, Randy, ‘MEMS-based inertial sensor is not your grandfather’s gyroscope’, EDN, 12/1/2008 • Weinberg, Harvey, ‘MEMS (Micro Electro-Mechanical Systems) Technology, http://www.sensorland.com/HowPage023.html ECE5320 Mechatronics. Assignment#1 Survey on sensors and actuators

  4. To explore further (survival pointers of web references etc) • http://www.sensorland.com/HowPage023.html • Sensorland provides information on how the MEMS sensor works and how it has moved into common products. • http://www.sensorsmag.com/articles/0203/14/ • Sensorsmag provides more information MEMS and other sensors. • http://en.wikipedia.org/wiki/MEMS • Basic information on MEMS. ECE5320 Mechatronics. Assignment#1 Survey on sensors and actuators

  5. Overview • MEMS sensors are one of the smallest mass-produced, low g, low cost, dual axis accelerometers. • Two major uses of MEMS sensors: • Accelerometers • Gyroscopes ECE5320 Mechatronics. Assignment#1 Survey on sensors and actuators

  6. Overview - Accelerometer • Acceleration causes deflection of the body of the sensor (proof mass) from its suspended centre location. • The proof mass is suspended by polysilicon springs above the substrate such that the MEMS structure can move in the X and Y axes. Picture from: http://www.sensorland.com/HowPage023.html ECE5320 Mechatronics. Assignment#1 Survey on sensors and actuators

  7. Overview - Gyroscope • MEMS gyroscopes use a vibrating structure to determine orientation instead of traditional rotating disk. • Using Coriolis acceleration the gyroscopes measure their angular rate. Picture from: www.edn.com/article/CA6614434.html?title=Article&spacedesc=news&nid=3927 ECE5320 Mechatronics. Assignment#1 Survey on sensors and actuators

  8. Major Applications • Accelerometers in consumer electronics: • Cell phones • PC hard disk drives • Cameras • Computer peripherals • Wireless devices • Airbag systems ECE5320 Mechatronics. Assignment#1 Survey on sensors and actuators

  9. Major Applications • Gyroscopes in: • Cars • Robotics • Computer peripherals • Wireless devices • Other applications requiring yaw detection. ECE5320 Mechatronics. Assignment#1 Survey on sensors and actuators

  10. Major Advantages • Small footprint • Mass producible • Sensitive to low g’s • Low Cost • Low Power • High Performance • Integration • Rugged ECE5320 Mechatronics. Assignment#1 Survey on sensors and actuators

  11. Principle - Accelerometer • Proof mass has 32 sets of radial fingers that make up a capacitor with a pair of fixed plates. • Differential capacitance is measured from the fingers and plates using synchronous modulation/ demodulation techniques. Picture from: http://www.sensorland.com/HowPage023.html ECE5320 Mechatronics. Assignment#1 Survey on sensors and actuators

  12. Principle - Accelerometer • ADXL202 MEMS sensor block diagram is shown. • Pulse-width-modulation (PWM) proportional to acceleration is the output of this MEMS accelerometer. • A microcontroller is used to decode the PWM. Picture from: http://www.sensorland.com/HowPage023.html ECE5320 Mechatronics. Assignment#1 Survey on sensors and actuators

  13. Principle - Gyroscope • Image taken of a gyroscope MEMS from a camera shows how the gyroscope was similar to the accelerometer in basics. Image from: http://www.edn.com/article/CA6614434.html?title=Article&spacedesc=news&nid=3927 ECE5320 Mechatronics. Assignment#1 Survey on sensors and actuators

  14. Principle - Gyroscope • Vibrating structure is used instead of a traditional rotating disks to determine orientation. • Acceleration proportional to the object’s distance from the center of the disk known as the Coriolis acceleration is the principle behind MEMS sensor gyroscopes. • Gyroscope has two MEMS devices similar to accelerometer in them. ECE5320 Mechatronics. Assignment#1 Survey on sensors and actuators

  15. Principle - Gyroscope • Orientation of two MEMS structures allows two-axis detection and improved Coriolis acceleration measurements. • MEMS device shown has onboard EEPROM for factory calibration eliminating the need for external end-user calibration. • External circuitry is needed to detect the capacitance changes and regulate the MEMS sensor outputs. ECE5320 Mechatronics. Assignment#1 Survey on sensors and actuators

  16. Devices Using MEMS sensors “Suitable for oxygen concentrators, inhaled anesthetics and ventilators, Omron's D6F MEMS flow sensors can measure flow speed from 1 mm/s to 40 m/s.” “ADI's two-axis accelerometer is used for tilt inclination measurement of the user's forearm in Omron's blood pressure monitor for the wrist.” Images from: www.eetimes.com/news/design/showArticle.jhtml?articleID=205207022 ECE5320 Mechatronics. Assignment#1 Survey on sensors and actuators

  17. Major Specifications • Sensitivity • Accuracy • Voltage • Designed measurement parameters • Response time • Temperature range of operation • IC package ECE5320 Mechatronics. Assignment#1 Survey on sensors and actuators

  18. Limitations • Mechanical design of microscopic mechanical systems take time to understand. • Materials not well characterized mechanically. • Polysilicon’s mechanical properties have had little mechanical understanding and change properties in the microscopic world. ECE5320 Mechatronics. Assignment#1 Survey on sensors and actuators

  19. Limitations • Electronic design of MEMS sensors is very challenging. • Electronics have to be small to save on cost. • Be able to realize small variable capacitance and convert them to the proper sensing. • Have to compensate for temperature and noise. ECE5320 Mechatronics. Assignment#1 Survey on sensors and actuators

  20. MEMS Sensor Manufacturers • Freescale Semiconductors • Analog Devices • STMicroelectronics • Texas Instruments • IBM • Qualcomm • VTI Technologies ECE5320 Mechatronics. Assignment#1 Survey on sensors and actuators

More Related