1 / 19

Dr. Stacy Bamberg Faculty Advisor Dr. Bruce MacWilliams Industry Advisor

Dr. Stacy Bamberg Faculty Advisor Dr. Bruce MacWilliams Industry Advisor Dante Bertelli dante@g6net.com Brad Hansen bch2000@hotmail.com Joseph Alston jda12@utah.edu Chad Taylor jchadtaylor@hotmail.com. Outline. Schedule Budget Mechanical Design Electronic Design. Schedule.

tejano
Télécharger la présentation

Dr. Stacy Bamberg Faculty Advisor Dr. Bruce MacWilliams Industry Advisor

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Dr. Stacy Bamberg Faculty Advisor Dr. Bruce MacWilliams Industry Advisor Dante Bertelli dante@g6net.com Brad Hansen bch2000@hotmail.com Joseph Alston jda12@utah.edu Chad Taylor jchadtaylor@hotmail.com

  2. Outline • Schedule • Budget • Mechanical Design • Electronic Design

  3. Schedule • Hip Manufacturing Complete • Knee Designed • Manufacturing Due April 1 • Electronics Due Design Day

  4. Budget • Revised for Electronics • Total: $1,000.00 • Used: $90.00 • Mechanical Components: $210.00 • DAQ: $275.00 • Electronic Components: $425.00

  5. Mechanical Design Lower Limb Model • Hip Manufacturing • Knee Design • Foot Redesign • Leg Members Hip Knee Leg Members Foot ProE Drawing Courtesy: Brad Hansen

  6. Mechanical Design – Hip Manufactured Hip • Manufacture Complete • Design Functional • Optical Encoders to be Mounted Image Courtesy: Brad Hansen

  7. Mechanical Design – Knee Knee Upper Leg • Design Complete • Materials Ordered • Manufacturing to Start Next Week Fork Patella Axis Lower Leg Knee Bent Upper Leg Fork Clearance ProE Drawings Courtesy: Brad Hansen Lower Leg Patella

  8. Mechanical Design – Foot and Leg Members Foot • Foot to be Redesigned • Leg Members to be Ordered Motion Axes Leg Members Telescopic Tubing ProE Drawings Courtesy: Chad Taylor Image Courtesy: www.testrite.com

  9. Electronics • Low cost • Miniature size • Push-on hub - spring loaded collet design • Minimum shaft length of .375" • Shaft diameter of 1/4" • High retention snap-in polarized connector • Accepts ±.020" (±.5mm) axial shaft play • Tracks from 0 to 30,000 cycles/sec • 256 cycles per revolution (CPR) • 2 channel quadrature TTL squarewave outputs • -10° to +85°C operating temperature • Single +5V supply • Incremental Encoder – E4P-256-250-H Image courtesy: http://www.usdigital.com

  10. Electronics Data Rates: • 256 Cycles per revolution • 120 revolutions per minute • Using quadrature TTL squarewave • Sample rate of 2kHz per channel • Each encoder consist of 2 channels (A & B) • The Lower limb needs to have 6 optical encoder installed. • Total Sampling Rate = 2kHz*2(channels)*6(optical encoders) • =24kHz

  11. Electronics Transmission line to computer • Wireless (RF) • Serial (RS-232) • Fiber optics (Soundcard) • Embedded Compact Flash Card • USB DAQ

  12. Electronics Transmission line to computer • Wireless (RF) or Serial (RS-232) • Interfacing with dsPIC30F Family: • Only two optical encoder per PIC. • Data transmission over serial/wireless. • Custom PCB needed.

  13. Electronics Transmission line to computer • Fiber optics (Soundcard) • Digital signal processing needed. • Multiple chips needed • Team is made of MEs not EEs.

  14. Electronics Transmission line to computer • Compact Flash • Interfacing with dsPIC30F Family: • Only two optical encoder per PIC. • Custom PCB needed.

  15. Electronics Transmission line to computer • USB DAQ • Easy to use • Advanced expertise inside group • Suitable data rates • Predictable • USB Extension

  16. Electronics Transmission line to computer USB DAQ • National Instruments • USB-6501 (Full digital) • 24 Digital lines • USB-6009 (Analog/Digital) • 48 kS/s • 12 Digital • 12 Analog lines

  17. Electronics Data Processing LabView SignalExpress Matlab

  18. Conclusion • On-Schedule • Budget is Adequate • Mechanical Design • Hip Manufactured • Knee Designed • Foot and Leg Members “in the works” • Electronic Design • Optical Encoder • Data Transmission • Data Processing

  19. For Further questions contact our Team Leader: Dante Bertelli at dante@g6net.com

More Related