1 / 37

Error Resilience and Performance Evaluation of H.264/AVC video streams in a Lossy Wireless Environment

Muhammad Saleem Koul, SM IEEE mskoul@uta.edu EE Dept., UT Arlington. EE 5359: Multimedia Processing Final Project. Error Resilience and Performance Evaluation of H.264/AVC video streams in a Lossy Wireless Environment. Synopsis.

teneil
Télécharger la présentation

Error Resilience and Performance Evaluation of H.264/AVC video streams in a Lossy Wireless Environment

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Muhammad Saleem Koul, SM IEEE mskoul@uta.edu EE Dept., UT Arlington EE 5359: Multimedia Processing Final Project Error Resilience and Performance Evaluation of H.264/AVC video streams in a Lossy Wireless Environment

  2. Synopsis • Multimedia over Wireless has become a reality with Broadband 3G/4G Cellular Technologies . • Inherent nature of the transmission medium makes the problems of Packet Loss and Delay variance (jitter) more severe in Wireless/Cellular networks. • Several Error Concealment Algorithms for H.264 are compared, their advantages and disadvantages are analyzed. A new EC Algorithm is also proposed. • A Video Quality Assessment (VQA) methodology is introduced, that helps analyze and quantify these effects on the Quality of the received Video.

  3. Typical 3G/4G Network Applications ~10 Mbps ~10 Mbps CDMA 2000 1X: 144 kbps EVDO Rev A: 500-700kbps WiMAX: >3.1Mbps CDMA 2000 1X: 144 kbps EVDO Rev A: 500-700kbps WiMAX: >3.1Mbps ~10 Mbps ~10 Mbps

  4. Correlation in Video Sequences temporal correlation spatial correlation Figure 3.2 Spatial and temporal correlation in a video sequence

  5. H.264 Performance Better image quality at the same compressed bitrate, or a lower compressed bitrate for the same image quality. video frame compressed at the same bitrate (150 kbps) using MPEG-2 (left), MPEG-4 Visual (center) and H.264 compression (right), Courtesy: Vcodex White paper http://www.vcodex.com

  6. Typical Stream Setup courtesy: streamingmedia.org

  7. H.264/AVC Structure Input Video Signal Split into Macroblocks 16x16 pixels Coder Control Control Data Transform/Scal./Quant. Quant.Transf. coeffs - Decoder Scaling & Inv. Transform Entropy Coding Deblocking Filter Intra-frame Prediction Output Video Signal Motion- Compensation Intra/Inter Motion Data Motion Estimation Basic coding structure for H.264/AVC for a macroblock.

  8. Error Concealment vs Error Resilience Error Resilience

  9. Error Concealment – Frame missing • Temporal Replacement • Replaces missed Frame/MB as (0,0) • Copy a MB/Frame from previously reconstructed reference slice at the exact same position

  10. Temporal Replacement (contd.) Frames# 115, 116 and 117 of the Original Sequence Successfully decoded Frame# 115 and lost Frame #116. Frame# 116 was reconstructed by Frame copy. Frame #117 is degraded.

  11. Error Concealment – Frame missing (contd.) • Multi-frame Motion Vector Averaging (MVA) • Exploits MVs of a few past frames • Estimate the MV of each pixel in last successful frame • Project last frame onto an estimate of missing frame • Sometimes worse than temporal replacement • How many past frames should be used? • Farther reference frame could not contain helpful MV

  12. Error Concealment – Frame missing (contd.) • Motion Vector Extrapolation (MVE) • Compensate the missed MB by extrapolating each MV that is stored in previously decoded frame • 8x8 sub-block based process • Large overlapped MV is selected for the sub-block • If there is no overlap, then use Zero MV

  13. Different Error Concealment Techniques Ref: I.C.Todoli “Performance of Error Concealment Methods for Wireless Video”, Diploma Thesis, Vienna University of Technology, 2007 [1] Copy-paste Original Boundary matching Error Weighted Average Block matching Decode I frame without residuals Decode without residuals

  14. Deformable Surface Morphing [10,11] • One of the simplest Morphing methods is Image morphing using deformable surfaces. • We devised a mapping of the H.264 motion vectors to a deformable surface morph. • Once the morphing surface matrix is obtained we apply it to the previous frame to obtain the next frame. • We show that a geometric warp transform inherently smooths out the motion vectors in case of lost motion vectors and residual information. • Conversely, the same geometric warp could be applied at the encoder to reduce the size of the residual, thus decreasing the overall bandwidth overhead.

  15. Motion Vector to Deformable Surface Morphing

  16. Different Error Concealment Techniques (QCIF) a) Error (No Error Concealment) MSE: 2498 PSNR: 14.15 dB SSIM: 0.7340 b) Weighted averaging MSE: 891.24 PSNR: 18.63 dB SSIM: 0.7522 c) Frame Copy MSE: 123. 8 PSNR: 27.20 dB SSIM: 0.8598

  17. Different Error Concealment Techniques (QCIF) d) Decoded without residual MSE: 46.10 PSNR: 31.49 dB SSIM: 0.925 e) Motion vector copy without residual MSE: 52.50 PSNR: 30.93 dB SSIM: 0.913 f) Geometric warping after MV copy MSE: 42.51 PSNR: 31.85 dB SSIM: 0.928

  18. Different Error Concealment Techniques (CIF) a) Original Frames 36 and 37 Frame 37 suffers packet loss resulting in several MBs lost. b) Error (No Error Concealment) MSE: 207 PSNR: 25 dB SSIM: 0.925 c) Weighted averaging MSE: 97.56 PSNR: 28.24 dB SSIM: 0.946

  19. Different Error Concealment Techniques (CIF) d) Frame Copy MSE: 23.41 PSNR: 34.44 dB SSIM: 0.9781 e ) Motion vector copy MSE: 7.74 PSNR: 39.25 dB SSIM: 0.9903 f) Geometric warping after MV copy MSE: 6.72 PSNR: 39.90 dB SSIM: 0.9915

  20. Error Propagation due to I or P Frame Damage/Loss

  21. A Packet Loss Modelcourtesy: Feamster, Balakrishnan This plot shows the relationship between Packet Loss Rate and Frame Rate (or Perceived Video Quality) for Videos of different original PSNR.

  22. Packet Loss Model contd. • Effects of Packet Loss on observed frame rate at the receiver. • Using selective reliability of specific frames can improve the over all received Video quality • The graph shows that as the packet loss rate p increases, the frame rate/quality degrades roughly as [14]: • Let P(F|fi) be the conditional probability that a frame was successfully decoded at the receiver. Defining it as a Bernoulli random variable: • Successful decoding of a P frame depends on all I and P frames that precede it in the GOP: • Where p = packet loss rate • SI and SP are the average number of packets in an I and P frame respectively • NP = Number of P frames in a GOP

  23. Probability of frame loss of I-frames and P-frames • Following plots show the dependence of the probability of frame loss of typical Predicted frames. • I-frames have been proven by the model to result in the highest number of dependencies and probability of error propagation. • If the probability of degradation/loss of I-frames is decreased, it decreases the probability of degradation/loss of P-frames.

  24. Errors in JM13.2 EC implementation • The Error Concealment implementation in the latest JM decoder is far from perfect at this stage. • Several Open issues are already under investigation. Bugs have already been reported to the JVT-JM team. • Current implementation of the Motion Vector Copy does not work properly in JM13.2 • Ref URL: https://ipbt.hhi.de/mantis/search.php?project_id=1&search=error+concealment&sticky_issues=off&sortby=last_updated&dir=DESC&hide_status_id=-2

  25. (Objective) Video Quality Analysis of the Received Sequences • In this section we detail several Video Quality Analysis schemes applied to the transmitted and received video sequences and analyze their results in light of the VQEG final report ‘No one objective model outperforms the other in all cases’. • We compare results from RMSE, PSNR, DVQ and SSIM. • The VQA methods need to be mapped to a Human Perceivable Score (MOS). The importance of MOS mapping is discussed.

  26. Root-Mean-Square Error (RMSE) • It calculates the “difference” between two images. It can be applied to digital video by averaging the results for each frame. • For an MxN image, RMSE can be calculated as:

  27. PSNR (Peak Signal to Noise Ratio) • The most commonly used objective quality metric is the Peak Signal to Noise Ratio (PSNR). For a video sequence of frames. The PSNR (dB) of each frame having N*M pixels can be calculated as: where 255 is the maximum pixel value in the N*M pixel image (8-bit PCM).

  28. DCT based VQ Evaluation • The conventional video metrics (RMSE and PSNR) do not take into account the spatial and temporal properties of human visual perception. • This DCT based VQ Metric proposed Xiao’s [8] is based on Watson’s work [7]. • The 8x8 based block based distortion is the ‘atom’ of all current compression based video processing. This kind of block based distortions are very eminent hallmarks in all decoded video sequences. Hence a metric that does the evaluation in the DCT domain on 8x8 blocks yields significant results:

  29. Structural Similarity Approach • This approach emphasizes that the Human Visual System (HVS) is highly adapted to extract structural information from visual scenes. Therefore, a measurement of structural similarity (or difference) should provide a good approximation to perceptual image quality. • The SSIM index is defined as a product of luminance, contrast and structural comparison functions. [9] • Where μ is the mean intensity, and σis the standard deviation as a round estimate of the signal contrast. C1 and C2 are constants. M is the numbers of samples in the quality map.

  30. MOS Mapping • In Multimedia, the Mean Opinion Score (MOS) provides a numerical indication of the perceived quality of received media after compression and/or transmission. The MOS is expressed as a single number in the range 1 to 5, where 1 is lowest perceived quality, and 5 is the highest perceived quality.

  31. Mobile to Mobile QCIF Clips NETWORK Sender trace Receiver trace MSE, PSNR, DVQ, SSIM

  32. Server to Mobile Device CIF Clips NETWORK Sender trace Receiver trace MSE, PSNR, DVQ, SSIM

  33. Applications and Future Work • A framework for evaluating the quality of standard video transmissions over a wireless infrastructure (system/subsystem). • Implement several novel error concealment algorithms using the JM 13.2 standard software [13]. • A test bed to test novel VQA approaches. It can also be used for new encoding schemes, compression algorithms, motion estimation methods etc.

  34. References • I.C.Todoli “Performance of Error Concealment Methods for Wireless Video”, Diploma Thesis, Vienna University of Technology, 2007 • T. Wiegand, G.J. Sullivan, G. Bjontegaard, and A. Luthra, "Overview of the H.264/AVC Video Coding Standard", IEEE Transactions on Circuits and Systems for Video Technology, Vol. 13, No. 7, pp. 560-576, July 2003. • Iain Richardson, “H.264 and MPEG-4 Video Compression”, John Wiley & Sons, 2003. • B. R. J. Klaue and A. Wolisz, “Evalvid - a framework for video transmission and quality evaluation,” Proc. 13th Intl Conf on Modeling, Techniques and Tools for Computer Performance Evaluation, Urbana, IL, 2003. • P. Seeling, et al., Video traces for network performance evaluation: a comprehensive overview and guide on video traces and their utilization in networking research. Springer, 2007. http://www.springer.com/engineering/signals/book/978-1-4020-5565-2 • Video Trace research group at ASU, “Yuv video sequences,” http://trace.eas.asu.edu/yuv/index.html. • A.B. Watson, "Toward a perceptual video quality metric", Human Vision, Visual Processing, and Digital Display VIII, 3299, pp 139-147, 1998. • F. Xiao, “Dct-based video quality evaluation,” Final Project for EE392J Stanford Univ. 2000. http://compression.ru/video/quality_measure/vqm.pdf • Z. Wang, “The SSIM index for image quality assessment,” http://www.cns.nyu.edu/zwang/files/research/ssim/.

  35. References (contd.) • D. Pröfrock, M. Schlauweg, E. Müller, ”Content-Based Watermarking by Geometric Warping and Feature-Based Image Segmentation”, IEEE/ACM Proceedings of International Conference on Signal-Image Technology & Internet-Based Systems, 17 - 21. 2006, Hammamet, Tunisia. • S.Y. LEE, K.Y. CHWA, S.Y. SHIN “Image morphing using deformable surfaces”, Proc. Computer Animation(1994) , vol 200, pp. 31-39. • Joint Video Team (JVT), "ITU-T Recommendation H.264: ISO/TEC 14496-10:2005," ITU-T, 2005. • Joint Model (JM) - H.264/AVC Reference Software. http://iphome.hhi.de/suehring/tml/download/. • N. Feamster and H. Balakrishnan, “Packet Loss Recovery for Streaming Video”12th International Packet Video Workshop, Pittsburgh, PA, April 2002. • VQEG, “Final report from the video quality experts group on the validation of objective models of video quality assessment,” Mar. 2000. http://www.vqeg.org/.

More Related