1 / 19

Pass4sure 300-115 Study Guide

Here you can download valid and testified dumps of cisco 300-115 with a free demo. Get the latest dumps and pass your exam easily. http://www.testbells.com/300-115.html

testbells10
Télécharger la présentation

Pass4sure 300-115 Study Guide

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Cisco 300-115 Implementing Cisco IP Switched Networks (SWITCH v2.0) Question Answer

  2. What is Cisco 300-115 Exam Dumps… Implementing Cisco IP Switched Networks (SWITCH 300-115) is a 120-minute qualifying exam with 45‒55 questions for the Cisco CCNP Routing and Switching and CCDP certifications. The SWITCH 300-115 exam certifies the switching knowledge and skills of successful candidates. They are certified in planning, configuring, and verifying the implementation of complex enterprise switching solutions that use the Cisco Enterprise Campus Architecture. The SWITCH exam also covers highly secure integration of VLANs and WLANs. http://www.testbells.com/300-115.html

  3. Detail of Cisco 300-115 Exam .… Vendor Cisco Exam Name Implementing Cisco IP Switched Networks (SWITCH v2.0) Exam Code 300-115 Total Questions 201 Q&As http://www.testbells.com/300-115.html

  4. TestBells is Here… Testbells have dumps for all top vendors including Cisco, Microsoft, CompTIA, EMC, Juniper, BM, Oracle etc. Pass4sure regularly update our products and provide updated brain dumps with money back guarantee. Testbells is now offering exam 300-115 test engine with 100% passing guarantee. Buy Testbells 300-115 pdf or test engine and pass your exam easily. If you don't pass in your exam then we will refund your full money. http://www.testbells.com/300-115.html

  5. Why We Choose Incredible 99.4% Pass Rate of Implementing Cisco IP Switched Networks Testbells…..? 3500+ Exams Real Questions 300-115 Test Engine and PDF Both Available 12 Professional Exam Content Writers Easy to Read 300-115 Question Answers Over 8 years experience 91,250 satisfied customers 300-115 Exam Simulation

  6. Question Answer Of Question: 1 What is the maximum number of switches that can be stacked using Cisco StackWise? 300-115 A. 4 B. 5 C. 8 D. 9 E. 10 F. 13 Answer: D http://www.testbells.com/300-115.html

  7. Question Answer Of Question: 2 A network engineer wants to add a new switch to an existing switch stack. Which configuration must be added to the new switch before it can be added to the switch stack? 300-115 A. No configuration must be added. B. stack ID C. IP address D. VLAN information E. VTP information Answer: A http://www.testbells.com/300-115.html

  8. Question Answer Of Question: 3 What percentage of bandwidth is reduced when a stack cable is broken? 300-115 A. 0 B. 25 C. 50 D. 75 E. 100 Answer: C http://www.testbells.com/300-115.html

  9. Question Answer Of Question: 4 Which set of configurations will result in all ports on both switches successfully bundling into an EtherChannel? 300-115 A. switch1 channel-group 1 mode active switch2 channel-group 1 mode auto B. switch1 channel-group 1 mode desirable switch2 channel-group 1 mode passive C. switch1 channel-group 1 mode on switch2 channel-group 1 mode auto D. switch1 channel-group 1 mode desirable switch2 channel-group 1 mode auto Answer: D http://www.testbells.com/300-115.html

  10. Question Answer Of Question: 5 300-115 http://www.testbells.com/300-115.html

  11. Question Answer Of How can the traffic that is mirrored out the GigabitEthernet0/48 port be limited to only traffic that is received or transmitted in VLAN 10 on the GigabitEthernet0/1 port? 300-115 A. Change the configuration for GigabitEthernet0/48 so that it is a member of VLAN 10. B. Add an access list to GigabitEthernet0/48 to filter out traffic that is not in VLAN 10. C. Apply the monitor session filter globally to allow only traffic from VLAN 10. D. Change the monitor session source to VLAN 10 instead of the physical interface. Answer: C http://www.testbells.com/300-115.html

  12. Question Answer Of Question: 6 300-115 http://www.testbells.com/300-115.html

  13. A network engineer wants to analyze all incoming and outgoing packets for an interface that is connected to an access switch. Which three items must be configured to mirror traffic to a packet sniffer that is connected to the distribution switch? (Choose three.) Question Answer Of 300-115 A. A monitor session on the distribution switch with a physical interface as the source and the remote SPAN VLAN as the destination B. A remote SPAN VLAN on the distribution and access layer switch C. A monitor session on the access switch with a physical interface source and the remote SPAN VLAN as the destination D. A monitor session on the distribution switch with a remote SPAN VLAN as the source and physical interface as the destination E. A monitor session on the access switch with a remote SPAN VLAN source and the physical interface as the destination F. A monitor session on the distribution switch with a physical interface as the source and a physical interface as the destination Answer: B, C, D http://www.testbells.com/300-115.html

  14. Question Answer Of Question: 7 After an EtherChannel is configured between two Cisco switches, interface port channel 1 is in the down/down state. Switch A is configured with channel-group 1 mode active, while Switch B is configured with channel-group 1 mode desirable. Why is the EtherChannel bundle not working? 300-115 A. The switches are using mismatched EtherChannel negotiation modes. B. The switch ports are not configured in trunking mode. C. LACP priority must be configured on both switches. D. The channel group identifier must be different for Switch A and Switch B. Answer: A http://www.testbells.com/300-115.html

  15. Question: 8 Question Answer Of An EtherChannel bundle has been established between a Cisco switch and a corporate web server. The network administrator noticed that only one of the EtherChannel links is being utilized to reach the web server. What should be done on the Cisco switch to allow for better EtherChannel utilization to the corporate web server? 300-115 A. Enable Cisco Express Forwarding to allow for more effective traffic sharing over the EtherChannel bundle. B. Adjust the EtherChannel load-balancing method based on destination IP addresses. C. Disable spanning tree on all interfaces that are participating in the EtherChannel bundle. D. Use link-state tracking to allow for improved load balancing of traffic upon link failure to the server. E. Adjust the EtherChannel load-balancing method based on source IP addresses. Answer: E http://www.testbells.com/300-115.html

  16. Question Answer Of Question: 9 Interface FastEthernet0/1 is configured as a trunk interface that allow s all VLANs. This command is configured globally: monitor session 2 filter vlan 1 - 8, 39, 52 What is the result of the implemented command? 300-115 A. All VLAN traffic is sent to the SPAN destination interface. B. Traffic from VLAN 4 is not sent to the SPAN destination interface. C. Filtering a trunked SPAN port effectively disables SPAN operations for all VLANs. D. The trunk's native VLAN must be changed to something other than VLAN 1. E. Traffic from VLANs 1 to 8, 39, and 52 is replicated to the SPAN destination port. Answer: E http://www.testbells.com/300-115.html

  17. Question Answer Of Question: 10 A network engineer notices inconsistent Cisco Discovery Protocol neighbors according to the diagram that is provided. The engineer notices only a single neighbor that uses Cisco Discovery Protocol, but it has several routing neighbor relationships. What would cause the output to show only the single neighbor? 300-115 A. The routers are connected via a Layer 2 switch. B. IP routing is disabled on neighboring devices. C. Cisco Express Forwarding is enabled locally. D. Cisco Discovery Protocol advertisements are inconsistent between the local and remote devices. Answer: A http://www.testbells.com/300-115.html

  18. Testbells offered You… 24/7 Customer Support on Mail and Live Chat 100% Guarantee to Pass Exam 100% Lowest Price Guarantee Answers Verified by Experts Based on Real Exam Scenarios 3500+ Exams Dumps Quality and Value http://www.testbells.com/300-115.html

  19. http://www.testbells.com/300-115.html

More Related