1 / 9

dU = dq + dw

dU = dq + dw. Now 1st Law becomes :. dU = C v dT + PdV. Can also define constant – pressure heat capacity:. C P ≡ (∂q/∂T) P. Finally:. C P – C V = R. At constant volume: dU = dq If system can change volume, dU ≠ dq Some heat into the system is converted to work ∴ dU < dq

thanh
Télécharger la présentation

dU = dq + dw

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. dU = dq + dw Now 1st Law becomes: dU = CvdT + PdV Can also define constant – pressure heat capacity: CP≡ (∂q/∂T)P Finally: CP– CV = R

  2. At constant volume: dU = dq • If system can change volume, • dU ≠ dq • Some heat into the system • is converted to work • ∴ dU < dq • Constant pressure processes • much more common than constant volume processes

  3. dU = dq + dw • = dq + PdV • Enthalpy, H defined as: H ≡ U + PV • At constant pressure: dH = dqP • For a measurable change: ΔH = qP • Properties of H: • absolute H cannot be determined • state function • H is an extensive physical property

  4. Plot of enthalpy as a function of temperature H = U + PV Slope = (∂H/∂T)P The heat capacity at constant pressure:

  5. Variation of Enthalpy with Temperature At constant pressure: dH = CP dT ∫dH = CP ∫dT (accurate only for a monatomic gas and/or small changes in T) ΔH = CPΔT For molecular gases and large changes in T:

  6. Use an approximate empirical expression: CP = a + bT + cT-2 e.g. For N2: a = 1021, b = 134.6, c = -17.9 (all in J K-1 kg-1) Determine ΔH when air is heated from -25°C to 20°C. (Assume air is pure N2.)

  7. Consider dry air in a layer heating and expanding: • The air expands and rises doing work vs gravity • U increases according to dU = CvdT • Work is done according to w = PdV • Assume air is N2 and O2 alone, then heat (dq) added • is partitioned in a ratio of 5:2 as: • dq = dU + PdV • U receives 2.5R units of heat, w receives R units

  8. Consider dry air in a layer heating and expanding: • A more general expression for a moving dry air • parcel which varies in P as it rises or sinks: • dΦ = - V dP • dq = dH - V dP • dH = Cp dT • dq = d(H + Φ) = d(Cp dT + Φ) • d(H + Φ) ≡ dry static energy

More Related