1 / 46

Injection Mold

Injection Mold. Injection Mold : Locating Ring. Injection Mold : Sprue Bushing. Injection Mold : Guide Pins and Bush. Injection Mold : Angle Pins. Injection Mold : Angle Pins. Injection Mold : Angle Pins Design. Injection Mold : Angle Pins Design.

thanos
Télécharger la présentation

Injection Mold

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Injection Mold

  2. Injection Mold : Locating Ring

  3. Injection Mold : Sprue Bushing

  4. Injection Mold : Guide Pins and Bush

  5. Injection Mold : Angle Pins

  6. Injection Mold : Angle Pins

  7. Injection Mold : Angle Pins Design

  8. Injection Mold : Angle Pins Design

  9. Injection Mold : Ejector Pins

  10. Injection Mold : Stepped Ejector Pins

  11. Injection Mold : Ejector Sleeve

  12. Injection Mold : Center Pins

  13. Injection Mold : Mold Components

  14. Injection Mold : Ejector Plate

  15. Injection Mold : Support Pillar

  16. Injection Mold : Stop Button

  17. Injection Mold : Ejector Plate Guide

  18. Injection Mold : Gate Design

  19. Injection Mold : Gate Design

  20. Injection Mold : Runner Design

  21. Injection Mold : Sprue Gate Design

  22. Injection Mold : Sprue Gate Type

  23. Injection Mold : Lateral Film Gate

  24. Injection Mold : Central Film Gate

  25. Injection Mold : Disk Gate

  26. Injection Mold : Ring Gate

  27. Injection Mold : Ring Gate

  28. Injection Mold : Overlap Gate

  29. Injection Mold : Tunnel Gate

  30. Injection Mold : Tunnel Gate

  31. Injection Mold : Ingate Design

  32. Injection Mold : Runner Design

  33. Injection Mold : Runner Function

  34. Injection Mold : Runner Design

  35. Injection Mold : Runner

  36. Injection Mold : Runner Shape

  37. Injection Mold : Mold Cooling

  38. Injection Mold : Mold Cooling

  39. Injection Mold : Mold Cooling

  40. Injection Mold : Mold Cooling

  41. Injection Mold : Mold Cooling

  42. Injection Mold : Mold Cooling

  43. Injection Mold : Runner Designing • Ex. The runner lay-out for eight cavity mold is illustrated in fig. If the mold is to be designed so that the pressure at the gate is the same in all cases, Determine the radius of the runner in section A. The flow may be assume to be isothermal.

  44. Injection Mold : Runner Designing Solution: Although this runner system is symmertrial, it is not balanced. If the runner has the same diameter throught all sections, then the moldings close to the sprue would fill first and would be over-pack before the outermost cavities were filled simulteneously at the same pressure.In this case it is necessary to ensure the pressure drop in section 1 and 3 is the same at the pressure drop in section 2. Pressure drop circular channel.

  45. Injection Mold : Runner Designing

  46. Injection Mold : Runner Designing

More Related