1 / 10

MS BEST Kits 2013

MS BEST Kits 2013. Presented By: Danielle Grimes. Consumable Kit Changes. Removed 1/8” hardboard sheet Added 1/2” plywood sheet Removed 1/4”-28 nylon nut Added 1/4”-28 nylon screw (for igus rod end bearing) Increased rotary potentiometer quantity from one to two.

tillie
Télécharger la présentation

MS BEST Kits 2013

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. MS BEST Kits 2013 Presented By: Danielle Grimes

  2. Consumable Kit Changes • Removed 1/8” hardboard sheet • Added 1/2” plywood sheet • Removed 1/4”-28 nylon nut • Added 1/4”-28 nylon screw (for igus rod end bearing) • Increased rotary potentiometer quantity from one to two

  3. Consumable Kit Changes Continued • Added #10-32 x 3/4” hex head screw • Added painters tape • Removed 1/4”-20 x 4” eyebolts (for 2012 game) • Removed 9V battery • Removed large 10A micro switches

  4. Returnables Kit Changes • Added three wire sensor terminal cable • 2 minimum per kit • Added roller blade wheel and axle • Changed quantity of two wire sensor terminal cable • maximum of 6 per kit now • Removed Bourns' rotary potentiometer

  5. Items being removed from the kits.

  6. Items being added to the kit (three wire sensor terminal cables not shown).

  7. 2013 Kit Related Rules Changes • Allow use of painters tape on all Returnable Kit items except the Joystick • If your Joystick has been stripped and the back cannot be attached, tape will be fine to keep the back in place.

  8. 2013 Avoidable Kit Issues • Fried motor controllers due to sloppy wiring • Warn students about shorting out the motor controllers • Improved units are in development • Stripped servo gears due to overload • Warn students about applying external loads to the servos

  9. Contact Information • To report any broken pieces, please email me at msbestdirector@gmail.com • Any questions concerning how to use the parts can be directed to the Kit Q&A

  10. Housekeeping Rules • You have until September 21 to report any broken pieces • Please sort through kits today for any missing pieces • Please return Returnables in the condition given to you

More Related