1 / 22

Hydrophone based calibrator for seawater acoustic detection of UHE neutrinos

Omar Veledar ACoRNE collaboration – University of Sheffield Sapienza Universitá Di Roma 25 – 27 June 2008. Hydrophone based calibrator for seawater acoustic detection of UHE neutrinos. Outline. Rona array DAQ Calibration Pinger development Deployment Future work. Rona hydrophone array.

timothy-brock
Télécharger la présentation

Hydrophone based calibrator for seawater acoustic detection of UHE neutrinos

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Omar Veledar ACoRNE collaboration – University of Sheffield Sapienza Universitá Di Roma 25 – 27 June 2008 Hydrophone based calibrator for seawater acoustic detection of UHE neutrinos

  2. Outline • Rona array • DAQ • Calibration • Pinger development • Deployment • Future work

  3. Rona hydrophone array • North-West Scotland (ranging hydrophones) • Good test bed for future deep sea experiments • Existing infrastructure √ • Wideband hydrophones √ • Omnidirectionality √ • Unfiltered data √ • All data to shore √ • Control over DAQ √ • No remote access X

  4. Rona hydrophone array • 8 hydrophones • Low noise preamplifiers • 1200m x 200m at mid depth in 230m deep sea • Hydrophone positioning off during data readout

  5. Quantum Superloader 3 DAQ • Offshore acquisition of amplified unfiltered data (16bit ADC@140kHz, ±1.2 V, 1bit = 38.147μV = 3662.1μPa) • FLAC lossless compression (>50%) • 8TB RAID interfacing to 16 tape autoloader LT03 tape robot (possible to relocate) • Offline signal processing and analysis - unlimited data re-processing

  6. Calibration - hydrophone • Acoustic detection of UHE neutrinos relies on ability to calibrate hydrophones - bipolar acoustic pulse from single omnidirectional source • Thermal energy resembling (shape and intensity) that of a neutrino induced shower should be deposited: array - interface pattern analogous to neutrino generated ‘pancake’ • Other possibilities: • Laser – interesting, but impractical • Copper plate current discharge

  7. Calibrator development - progression Laboratory tank Swimming pool Open sea (Rona) Development Lake (Kelk)

  8. Calibrator development - tools Tx – omnidirectional ± 1.8dB @ 10kHz Rx - flat frequency response

  9. (hydrophone) input output system & output => excitation pulse Signal generation - system Know system and desired output to deduce required excitation pulse Convolution integral (t) y(t) = x(t) * h(t) - complicated Convolution (s) - freq. domain Y(s) = X(s) . H(s) Inverse FFT y(t) = IFFT(Y(s)) Impulse response not practical use step response Step response = time integral of impulse response Time domain Discrete time signal Impulse Step

  10. d / dt Hydro system H(t) Imp. resp. step o/p Signal generation - signal Deconvolute i/p from sys. & o/p X(s) = Y(s) / H(s) Transform to time domain x(t) = IFFT(X(s)) • RECIPE • Find step response (of the transmit hydrophone) • Generate system TF (model transmit hydrophone) • Find excitation signal by deconvoluting required o/p and system TF

  11. Pool – hydrophone modelling • Hydrophone step response is recorded at various distances and dejittered

  12. Hydrophone data fitting • 5th order TF used to model hydrophone TF: Mathematical representation of the relationship between the i/p and o/p of a LTI system

  13. Technique verification

  14. Excitation signal • Desired acoustic pulse and the estimated hydrophone driving electrical signal Generates 10 Pa @ 1m

  15. Pool - bipolar acoustic pulse Measured at various distances

  16. Rona - field trip • The joys of British “Summer”

  17. Future work • Repeat Rona deployment at different sea state and over different hydrophones using new excitation pulses • An array development using 8 hydrophones • Line array – acoustic pancake • Fully autonomous for great depths • Surface deployment => Power Amplifier, easy DAQ, (linearity?) • Field data analysis

  18. New excitation signal See Bevan et al. – parameterisation: more energy at core of the shower Restrictive by the hydrophone linearity potentially, can generate up to approximately 60 Pa @ 1m

  19. Array hydrophone count 2 hydrophones 3 hydrophones 4 hydrophones 6 hydrophones 8 hydrophones 10 hydrophones

  20. Array development • Acquired RESON hydrophones • Developed PIC based hydrophone control • Array construction under way

  21. Conclusions • Understood and mathematically modelled hydrophone system • Successfully generated bipolar acoustic pulses in laboratory and pool conditions • Ongoing Rona data analysis • Array development • Pancake detection

  22. Thank you Questions ? http://pppa.group.shef.ac.uk/acorne.php

More Related