1 / 6

Presentation on Feed and Expansion Cistern

Presentation on Feed and Expansion Cistern. Central Heating. At the end of this part you should be able to:. Identify general system methods of feed and vent Explain the purpose and function of the component parts Know how to set the water level correctly in the F&E cistern.

tomas
Télécharger la présentation

Presentation on Feed and Expansion Cistern

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Presentation on Feed and Expansion Cistern

  2. Central Heating At the end of this part you should be able to: Identify general system methods of feed and vent Explain the purpose and function of the component parts Know how to set the water level correctly in the F&E cistern

  3. Central Heating System components Now we’ll look at some of the key components within the pipework system. This will include the: Feed and expansion cistern Primary open safety vent

  4. Central Heating – Feed and Expansion The feed and expansion cistern is used on all open vented system .. what do you think it’s for ? The cistern allows the system to be filled up. Main purpose is to allow water in the system to expand. Water level should be set low in the cistern when filling the system. Feed from the system on an average domestic property is usually 15mm and should NOT include ANY valves … why ? This to ensure that in the event of overheating there is a constant supply of cooler water to the system to prevent the dangerous condition of boiling occurring.

  5. Central Heating – Feed and Expansion Open vent to rise min 450mm above cistern to prevent surge effects Allow 4% of system volume for expansion Water level in F&E below cistern The f & e cistern is located at the highest point in the system, and it must not be affected by the position and head of the circulating pump. To avoid any problems on gravity primaries a minimum height can be obtained by dividing the maximum head developed by the pump by 3 On fully pumped systems, the level of water in the f & e cistern should be a minimum of 1m above the pumped primary to the DHW storage cylinder.

  6. Central Heating – Fully pumped cold feed and open vent position Flow to cylinder Flow to heating Cold feed from F&E 15mm Open vent to F&E 22mm Both of these pipes tee into the primary flow from the boiler BEFORE the pump IN THE ORDER shown Return from cylinder Return from heating

More Related