5 Tips For The Maintenance Of Your Swimming Pool

1. 5 Tips For The Maintenance Of Your Swimming Pool Maintenance of your pool is extremely important for the proper operation of the technical installation. A properly maintained pool also brings down the maintenance cost. Not only will you use less maintenance products, you'll even have a lower energy bill. So all tips are quite welcome! 1. Testing the pool water pH and chlorine levels: Regularly test pool water Use proper pool water tester It is best to check the pool water on a daily basis. Especially when the pool is used daily or for a prolonged period (e.g. on hot summer days), it's best to daily check the pool's pH and chlorine levels. If you act fast and always add pH or chlorine to the water in good time, you'll reduce the consumption of those products. For proper maintenance of the pool, you need to use a correct pool water tester. Ideally, the tester is in a position to immediately test 2 to 3 parameters, which should certainly include chlorine and pH! 2. Vacuuming the pool: Fewer dirt and debris = clear pool water Improved operation of technical installation Vacuuming the pool is important not just for the pool but also for the owner. nobody wants to swim in dirty pool water. Regularly vacuuming the pool removes the dirt particles from the water. With a manual pool vacuum, the particles go to the filter system; with an automatic pool robot, they're deposited within the filter cartridge. The cartridge must therefore be regularly rinsed. If your pool is clean, the technical installation are going to be ready to filter the water in less time. this allows you to spare the filter system. The result: less energy usage and longer service life. 3. Maintaining the filter: Remove dirt particles from filter Improved filter operation

2. It can't be stressed enough that you simply should also maintain your filter system by adequately rinsing it. A filter rinse is important when the pressure within the filter exceeds 1 bar. confirm to see this weekly! Rinsing the filter provides it with a breath of fresh air, as it were. The dirt particles disappear and also the filter can again remove all dirt particles from the pool. The result: clear pool water. 4. Covering the pool water: Fewer dirt particles in the water Heating energy cost savings There are a couple of simple precautions to facilitate the maintenance of your pool. One is covering the pool water when it's not in use. As a result, fewer dirt particles will find yourself within the pool water. In addition, a pool cover helps reduce the heating costs of your pool. A pool cover enables the water to retain heat and prevents it from cooling rapidly at the surface. The result: the heating system won't need to work as hard and therefore the cost savings will show up in your energy bill! 5. Rinse before swimming: Fewer dirt particles in the pool. The last pool water maintenance tip is also the simplest. Before you jump into the pool, have a fast rinse under a shower. this can prevent secondary contamination of the pool. In other words, dandruff, loose hairs, etc. won't end up in your pool. As a result, there'll be fewer dirt particles within the water. Those dirt particles will cause the chlorine level to drop and make the pool water look unclear. a fast rinse before swimming therefore results not only in clearer pool water but also in reduced consumption of maintenance products. Total Pool Care Serve the best in Katy & Cypress for Pool Service & Repairs. For Further Inquiry, you can call us at (832) 332-9988. Call us today to get a free estimate!