1 / 16

IENG 486 - Lecture 15

IENG 486 - Lecture 15. Gage Capability Studies. Bonus Points # 3. In teams of 4 people, go to the Project Office and perform a gage R & R study on the 7 parts. Half of the teams measured with the micrometer Half of the teams measured with the dial calipers

Télécharger la présentation

IENG 486 - Lecture 15

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. IENG 486 - Lecture 15 Gage Capability Studies IENG 486 Statistical Quality & Process Control

  2. Bonus Points # 3 • In teams of 4 people, go to the Project Office and perform a gage R & R study on the 7 parts. • Half of the teams measured with the micrometer • Half of the teams measured with the dial calipers • Entire team works together to analyze the data – for the 4 Operators, estimate: • σ2 total • σ2 repeatability • σ2 reproducability • σ2 product • P/T for gage, assuming USL – LSL = 0.005” IENG 486 Statistical Quality & Process Control

  3. Bonus Points # 4 • In teams of 4 people, go to the CIM Lab (CM 203) and set up a control chart strategy for the “pipe-bomb” machine. • Dr. Jensen will demonstrate the system, each team operates afterward. • The team will collect data using the scale, and track the data using the spreadsheet template, each control chart should have 30 samples. • Entire team works together to collect and analyze the data for the system, and to create and interpret x – and R – charts. • For the lab exercise, briefly report: • What your control chart strategy is (what did you measure and why) • Turn in print out of your trial control charts, and describe how the limits were developed • For each control chart, use your Trial Control Limits* on all 30 sample points, and interpret each chart for control using the 4 Western Electric Rules: • Convert your Trial Control Limit data to Standards • Circle Western Electric Rule violations, and describe what they show IENG 486 Statistical Quality & Process Control

  4. Gage Capability Studies • Ensuring adequate gage and inspection system capability • In any problem involving measurement the observed variability in product is due to two sources: • Product variability - σ2product • Gage variability - σ2gagei.e., measurement error • Total observed variance in product: σ2total = σ2product + σ2gage (system) IENG 486 Statistical Quality & Process Control

  5. e.g. Assessing Gage Capability • Following data were taken by one operator during gage capability study. IENG 486 Statistical Quality & Process Control

  6. e.g. Assessing Gage Capability Cont'd • Estimate standard deviation of measurement error: • Dist. of measurement error is usually well approximated by the Normal, therefore • Estimate gage capability: • That is, individual measurements expected to vary as much as owing to gage error. IENG 486 Statistical Quality & Process Control

  7. Precision-to-Tolerance (P/T) Ratio • Common practice to compare gage capability with the width of the specifications • In gage capability, the spec width is called the tolerance band • (not to be confused with natural tolerance limits, NTLs) • Specs for above example: 32.5 ± 27.5 • Rule of Thumb: • P/T  0.1 Adequate gage capability IENG 486 Statistical Quality & Process Control

  8. Estimating Variance Components of Total Observed Variability • Estimate total variance: • Compute an estimate of product variance • Since : IENG 486 Statistical Quality & Process Control

  9. Gage Std Dev Can Be Expressed as % of Product Std Dev • Gage standard deviation as percentage of product standard deviation : • This is often a more meaningful expression, because it does not depend on the width of the specification limits IENG 486 Statistical Quality & Process Control

  10. Using x and R-Charts for a Gage Capability Study • On x chart for measurements: • Expect to see many out-of-control points • x chart has different meaning than for process control • shows the ability of the gage to discriminate between units (discriminating power of instrument) • Why? Because estimate of σx used for control limits based only on measurement error, i.e.: IENG 486 Statistical Quality & Process Control

  11. Using x and R-Charts for a Gage Capability Study • On R-chart for measurements: • R-chart directly shows magnitude of measurement error • Values represent differences between measurements made by same operator on same unit using same instrument • Interpretation of chart: • In-control: operator has no difficulty making consistent measurements • Out-of-control: operator has difficulty making consistent measurements IENG 486 Statistical Quality & Process Control

  12. Repeatability & Reproducibility:Gage R & R Study • If more than one operator used in study then measurement (gage) error has two components of variance: σ2total = σ2product + σ2gage σ2reproducibility + σ2repeatability • Repeatability: • σ2repeatability - Variance due to measuring instrument • Reproducibility: • σ2reproducibility - Variance due to different operators IENG 486 Statistical Quality & Process Control

  13. Ex. Gage R & R Study • 20 parts, 3 operators, each operator measures each part twice • Estimate repeatability (measurement error): • Use d2 for n = 2 since each range uses 2 repeat measures IENG 486 Statistical Quality & Process Control

  14. Ex. Gage R & R Study Cont'd • Estimate reproducibility: • Differences in xi operator bias since all three operators measured the same parts • Use d2 for n = 3 since Rx is from sample of size 3 IENG 486 Statistical Quality & Process Control

  15. Ex. Gage R & R Study Cont'd • Total Gage variability: • Gage standard deviation (measurement error): • P/T Ratio: • Specs: USL = 60, LSL = 5 • Note: • Would like P/T < 0.1 IENG 486 Statistical Quality & Process Control

  16. Comparison of Gage Capability Examples • Gage capability is not as good when we account for both reproducibility and repeatability • Train operators to reduce σ2reproducability = 0.1181 • Since σ2repeatability = 1.0195 (largest component), direct effort toward finding another inspection device. IENG 486 Statistical Quality & Process Control

More Related