1 / 28

 0  (search for a 0 (980))

 0  (search for a 0 (980)). C.Bini, P.Gauzzi, D.Leone. Channel 1:  0  5  () Channel 2:  0  +  - 5  (  +  -  0 ) Combined fit to the M  spectra Conclusions KLOE General Meeting 20/12/2001 – Roma 3.

turner
Télécharger la présentation

 0  (search for a 0 (980))

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. 0(search for a0(980)) C.Bini,P.Gauzzi,D.Leone • Channel 1: 05 () • Channel 2: 0+-5 (+-0) • Combined fit to the M spectra • Conclusions • KLOE General Meeting 20/12/2001 – Roma 3

  2. 5  channel • Signal: • (a0+00)0 • Background: S/B • e+e-0 00 0.2 • (f0+00)00 0.3 • 3 1.5 (0.4% = fraction of 5 events) •  000 0.3 (2.5% = fraction of 5 events)

  3. Analysis scheme • Preliminary selection: no tracks, 5 prompt photons (5t), • Eprompt> 700 MeV, > 21o • First kinematic fit: 30 parameters with 9 constraints 9 ndf • Best photon pairing in the following hypotheses: • 1) 0 • 2) 00 • 3) 000 ( mass , E0=218 MeV in the selection 2) • 4) 3 ( mass , Erad=363 MeV in the selection 2) • Second kinematic fit : 30 parameters, 11 constraints • ( 9 +  and 0 masses for 1) or two 0 masses for 2) 3) ) • For each event this fit is performed three times •  hyp. 1) , 2) and 3) • Final cuts • All the events pass through the whole chain: cuts are applied • at the end

  4.  rejection • 0 • 00 •  E (MeV) Data M (MeV) M (MeV) • Photon pairing in the 3 hyp. •  rejection : Erad<340 MeV • To reduce the sample: |M-M| < 3 • cut at 2/ndf < 3to reject  000

  5. MC: 00 sample • 00 • 0 •  E (MeV) Events M (MeV) • Get spectrum from data: • |M-M|>3 to get a clean • 00 sample • Alternative way: use the spectrum • from Simona’s analysis M (MeV)

  6. MC: 00 sample  • Correct for efficiency • Get scale factors bin by bin • from the ratio of the • experimental spectrum to the • MC generated one • It takes into account for both • f0 and 00 00 • No need for MC • 0000 M (MeV)

  7. 00 rejection Data • 0 • 000 • 00 |M(1)- M (2)| (MeV) M (MeV) (0 wrong pairing) • Parabolic cut to reject 0 (equivalent to 2 cut on M) •  M < 760 MeV to reject f0 + 0 wrong pairing

  8. Data-MC comparison • Data • — MC • — bckg • Data • — MC Events Events 2/ndf Etot/E • Second fit: 2/ndf >3 dominated by background • (mainly 000)  cut at 2/ndf < 3

  9. Data-MC comparison • Data • — MC • — bckg Events • 3  cut on M removed • Good agreement up to 10  (M-547)/ (M-135)/

  10. Final sample • Data • — 00 • —000  • —000 • — • Data • — MC Events Events M (MeV) cos • 916 events in the final sample

  11. Efficiency and luminosity  Efficiency: Average efficiency = 32.4% • Luminosity: • Run number range: 15174 – 17330 • Integrated luminosity: (16.45 0.33) pb-1 • use VLAB, uncertainty 2% • if there is no VLAB, use LAB x (1 – 1.2%) • if there is no LAB use TRGLUMI, • uncertainty  5% M (MeV) LVLAB = 15.78 pb-1 LLAB = 0.58 pb-1 LTRG = 0.09 pb-1

  12. Background subtraction Rej. factor Cross sect. or Br.(*) Expected events e+e-0 00 140  = 0.460.05 nb 54  6 00 40 Br = 10-4  10% 152  16   6  104  = 17.2  0.6 nb5  2  000 2.5  103  = 13.8  0.4 nb98 10 ——— tot. bckg. 309  20 The errors include MC statistics and cross section (or Br) uncertainties ((*) Only KLOE measurements) Signal (0) : 916 – 309 = 607 events with =(3.370.12) b (from  ) and Br() = (39.33 0.25) % (PDG 2000) Br(0) = (8.51  0.43 (stat.)) x 10 -5

  13. Systematics • Analysis cuts: evaluated by moving the cuts by 1 on the variable • and cuts on 2 by 1 • Cut Uncertainty • >21o (1o) 1.5 % • first fit 2 1.2 % • 3  on M 4.0 % • E < 340 MeV 2.0 % • Parabolic cut (M) 3.0% • M < 760 MeV 1.7 % • second fit 2 1.2 % • ——— • Combining in quadrature 6 %

  14. Uncertainty summary • Absolute (10-5 units) Relative • Statistics 0.43 5.0 % • Bckg subtraction 0.28 3.3 % • Analysis cuts 0.51 6.0 % • Luminosity 0.17 2.0 % • cross section 0.31 4.0% (L contribution subtracted) Br() 0.05 0.6 % Trigger to be evaluated ( negligible) Photon counting to be evaluated (1—2 % ?) Br(0) = (8.510.51(stat.+bckg))0.62(syst.)) x 10 –5 Br(0) = (8.8 1.40.9) x 10 –5 SND (2000) Br(0) = (9.0 2.41.0) x 10 –5 CMD-2 (1999)

  15. +-5 channel • No background with exactly the same final state • Main backgrounds: • 2 Tracks + 3/4 photons + splitting/accidental • 2 Tracks + 6 photons + acceptance loss/merging

  16. Event selection • ECL (ppfilt) • 1 vtx in IR with 2 tracks • 5 prompt photons E>10 MeV, q>21o • kinematic fit 1 E/p cons., c-speed • Minv(p+p-) < 425 MeV • to reject KSp+p-  M (MeV) Large rejection factors few expected bckg events

  17. Data-MC comparison Before cut on Minv(p+p-) • h and w peaks clear. • MC signal + bckg well reproduces • data • gg and ppgg combinations • invariant masses after fit-1 gg and ppgg combinations invariant masses after fit-2 (variables from fit-1) M (MeV) M (MeV) After cut on Minv(p+p-) M (MeV) M (MeV) M (MeV) M (MeV) M (MeV) M (MeV)

  18. Final sample 197 events selected: Lint=16.4 pb-1 BR(0)=(7.960.60(stat+bckg) 0.47(syst))  10-5 Statistics 0.58 Bckg subtraction 0.15 Efficiency(*) 0.30 Br(+-0) 0.14 Luminosity 0.16  cross section 0.28 (*)work in progress Raw Minv(hp) spectrum and cos(qg) distribution

  19. Fit to the Mspectra • Contributions: • a0(980) with a00 • 00 with 0 • Br() 1/3 Br(0) =1.2  10-5 (PDG) • Br( 0) = 0.54  10-5 (Bramon, Grau, Pancheri, • Phys.Lett.B283(1992),416) • = 5.18  10-5 (Fajfer, Oakes, • Phys.Rev.D42(1990),2392) • 3)e+e-0 with • (e+e-0)  Br()  0.12  10-5  negligible • 1) and 2) can interfere

  20.  shape  momentum in the  c.m. Phase space ( angle in the  c.m.) Achasov-Gubin Phys.Rev.D63 094007(2001)

  21.  shape a.u. M (MeV) Good agreement with Bramon et al., Phys.Lett.B283,416 (1992)

  22. a0 (Flatte’,Phys.Lett.B63,224,(1976)) Above KK threshold Below KK threshold

  23. a000 interference (Achasov-Gubin) a0 only a0+ no interf. interference (+) interference (-) M (MeV)

  24. Fit method • Combined fit to the two spectra •  shape fixed + Br()/Br(+-0) fixed • Ni = number of events (data) i=1,Nexp bin in Mexp • Mij = smearing matrix, takes into account for resolution and photon • pairing effects j=1,Ngen bin in Mgen (from MC) • f = theoretical function • i2 = 2(data) + stat2(MC) • Free parameters: Br1=Br( 0), Br2=Br(a0), • a0 (PDG: 50—100 MeV) • Fixed : Ma0 = (984.8 1.2) MeV (PDG) ; gk = 0

  25. Fit results • Br1(10-5) Br2(10-5) a0(MeV) 2/ndf • Combined 1.780.40 6.220.43 12915 20.3/25 • Only ch. 1 1.310.54 6.520.57 13922 15.5/15 • Only ch. 2 2.450.69 6.000.74 11724 2.7/7 • Comb., +int. 2.200.44 5.920.47 12316 19.7/25 • Comb., - int. 1.510.42 6.620.48 13816 22.3/25 • Br(a0) = (6.220.43(stat+bckg))  10-5 • Agreementbetween the two samples • Very large a0 width, but it is model • dependent • Interference: not significant with this • statistics • Br1 close to Br() 1/3 Br(0)

  26. Fit to a0 only (Flatte’) • From Bramon et al., • Br1 = 0.54  10-5 • Try to fit the spectra to a0 only • 2 free parameters: • Br(a0) = (7.650.33)  10-5 • a0 = (192  18) MeV • 2/ndf = 37/26

  27. Fit to a0 only (II) • Flatte’ formula has no p3 • dependence, as expected for a • V  V S decay • Try a simple B.W. with p3 and • with a damping factor: • Br(a0) = (7.890.34)  10-5 • a0 = (36.9  5.2) MeV • = (890  100) MeV 2/ndf = 24.3/25

  28. Conclusions • The analysis of the two channels is well defined • The two samples are in good agreement • Systematics evaluation is almost done • The combined fit procedure is working: • The two channels are consistent • Separation of the two contribution a0(980) and  0 is difficult, because the fit cannot be performed in a model independent way

More Related