1 / 32

Study Guide

Study Guide. Biol 260 Lab Exam 2. Table of Contents. Lab 10 : F-test Lab 11 : t-test Lab 12 : Chi Square (X 2 ) Lab 13 : One-Way ANOVA Lab 15 : Two-Way ANOVA Lab 16 : Regression/Correlation. Lab 10: F-test.

tyler
Télécharger la présentation

Study Guide

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Study Guide Biol 260 Lab Exam 2

  2. Table of Contents • Lab 10: F-test • Lab 11: t-test • Lab 12: Chi Square (X2) • Lab 13: One-Way ANOVA • Lab 15: Two-Way ANOVA • Lab 16: Regression/Correlation

  3. Lab 10: F-test • Sample variance: basic measure of dispersion of the sample and an estimate of the true pop. variance from which the data was taken. • Homogeneous: when the variances are equal. • F-test: (variance ratio test) general procedure for comparing any two sample variances. • Two sample variances: approx. equal and ratio ≈ 1.0 (sample error). Two Tailed Alternative • H0:σ2 = σ2 α = 0.025 • HA: σ2 ≠ σ2 One-Tailed Alternative • H0:σ2 ≤ σ2 • HA:σ2> σ2 F-table: Two-tailed Alternatives • Larger s2 in numerator • Fcalc < 1 | greater than 1. • Fcrit = α/2 | upper tail. • Fcrit = α/2 | lower tail, don’t need. • Lower Fcrit value

  4. Lab 10: Variance Ratio (F-test) Two-Tailed (non-directional) • HA: σ2 ≠ σ2 • Fcalc: s2 larger = numerator. Obtaining Critical Fcritical • Choose α value • Two-tailed = α/2 | upper limit (tail) • One-tailed = α | upper limit • Table: p(F) < Fcritical • Find the column • Table top: v1 (num. s2). • Table bottom: v2 (denom. s2). • Fcritical = value in body of table. • Fcalc vs. Fcrit • Fcalc > Fcrit = reject H0. • Fcalc < Fcrit = accept H0 One-Tailed (directional) • HA: σ2 > σ2 • Fcalc: s21 = numerator (σ21). • H0 true: 50:50 chance either variance (s2) is greater. Degrees of Freedom (DOF) • v1: numerator s2 DOF. • v2: denominator s2 DOF. • DOF = n -1.

  5. Lab 10: F-test Calculate Fcritical values (just want p-values) • Type data values. • “vartest c1 c2;” | runs the F-test. • “unstacked.” | runs with unstacked data. • Fcalc > Fcrit: p < 0.05 • Fcalc < Fcrit: p > 0.05 Untabled Degrees of Freedom (N/A) • Conservative Critical Values • Next lower tabled values = decrease the value of one of the variances (numerator or denominator). • ↓ DOF for num/den. = ↑ critical, tabled F value. • True Fcritical will be smaller than tabled one. • Fcalc < Fcrit: ↑ num./den. DOF; accept H0. • Fcalc > Fcrit: reject H0.

  6. Lab 11: t-test or z-test (testing pop. means) T-test Information • T-test: compare the equality of two population means. • Equal variances: σ2 = σ2t-test or z-test • Unequal variances: σ2 ≠ σ2 t’-test and paired t-test. Two Sample Experimental Designs • Independent samples: (one control) replicatesare assigned independently and randomly to treatment groups or drawn independently from two diff pops (different species or different environments). • Paired samples: replicates are dependent; each one in a treatment is related to the paired replicate in another treatment (ex: twins assign. two diff diets). Null Hypothesis (H0) (ind. or paired) • H0: μ1 = μ2 • H0: μ1 – μ2 = 0 • H0: μ1 – μ2 = C0 • If equal: difference between two = 0. • C0: diff. between the two means is a value other than 0. Alternative Hypothesis (HA) (ind. or paired) • One tailed: HA: μ1 – μ2 > 0 • One-tailed HA: μ1 – μ2 < C0 • Two-tailed HA: μ1 – μ2 ≠ C0 • C0 = 0 testing H0 if means are equal.

  7. Lab 11: Independent Sample z-test t-test Pop. Variances Known (σ2 known) • Use z-test (norm. std. distribution). • Zcalc: from the equation below. • Zcrit: from table, compare to Zcalc. Pop. Variances Unknown (σ2 unknown) • F-test: (pre-test) test if s21 = s22. • H0: σ2=σ2 • HA: σ2≠σ2 • DOF1: n1 – 1 • DOF2: n2 – 1 Correct order of Tests • F-test: test H0 if σ2=σ2. report p-value • Accept H0: σ2=σ2 • Homoscedastic • pool sample variances. • Calculate tcalc. • tcrit using t-table, DOF = n1 + n2 – 2. • Reject H0: σ2≠σ2 • Heteroscedastic • Calculate t’calc. • Calculate t’crit. • Write hypotheses • Two-sample, 1 tailed t-test • H0: μ1 ≥ μ2 • HA: μ1 < μ2 • Report p-values, write conclusions.

  8. Lab 11: Independent Sample z-test t-test Two-Sample t-test (σ2=σ2) • σ2: aren’tsignificantly different. • s2p: pooled within-group variance. • Pooling: combing two sep estimates of the pop. Variance (σ2), use s1 and s2. • SS1/SS2: sums of squares (num. of s2). • DOF = n1 + n2 – 2. • σ2 ≠ σ2: reject H0 and incorrect to pool. • Incorrect to pool = do not use this eq. Two-Sample t-test, t’-test (σ2 ≠ σ2) • σ2: aresignificantly different. • Use: obs. s21 s22, not pooled s2p. • T’crit: (n1 = n2) use t-table, DOF = n -1 • Find t’crit for chosen α with this eq: • t1 = tcrit from table, DOF for n1 – 1. • ↓ t’crit = ↑ DOF • Tcalcbetw. t1 and t2, find exact t’crit. • Tcalc > both t1 and t2 reject H0. • Tcalc < both t1 and t2 accept H0.

  9. Lab 11: Paired t-test and Minitab Paired Two-Sample Two-Tailed t-test Minitab • Type data values. • “Stat”  “Basic Statistics”  “Paired t…” • “Samples in columns” • First: c1 • Second c2 Paired t-test (σ2 known) • Samples called pairs or blocks. • Ex: offspring from same parents. • Calculate differences within the blocks. • Calculate tcalc using diff of two samples. • Special case of one-sample, H0: μD = 0. • New observations: Di = Xi,1 – Xi,2. • n = # of pairs of obs. ( = # of blocks). • H0: μD = 0 • Directional HA: μD > 0 • Non-directional HA: μD ≠ 0 Paired t-test (σ2 known) • Paired t-test DOF = n – 1. • tcalc > tcrit: reject H0 p ≤ α • tcalc < tcrit: accept H0 p > α

  10. Lab 11: F-test (pre-test) and t-test Minitab (σ2 = σ2) F-test (are variances equal?)(unknown σ2) • Type data values. • “Stat”  “Basic Statistics”  “2 Variance…” • “Samples in Different Columns • First: c2 | larger σ2 • Second: c1 | smaller σ2 Independent Two-Sample One-Tailed (σ2 = σ2) • “Stat”  “Basic Statistics”  “2-sample t…” • “Samples in different columns” • First: c1 • Second: c2 • “Assume equal variances” | homoscedastic vs. hetero? • “Options”: Confidence level: “95.0” • Alternative: “greater than” | HA: μ > μ Alternative: “less than” | HA: μ < μ

  11. Lab 12: X2 Chi Square X2 (GOF, Independence, and Homogeneity) • All X2 are one-tailed, directional, not-asymmetric, X2crit= α = 0.05. • H0: Oi = Ei expected freq. are correct X2 = small X2≈ 0.0. • HA: Oi≠Eiexpected freq. are not correct X2= large. • X2calc≥ X2crit: Oi = Eireject H0 X2calc = large. • X2calc < X2crit: Oi ≠ Eiaccept H0 X2calc= small.

  12. Lab 12: X2 Chi Square Goodness of Fit X2: Goodness of Fit • Samples called pairs or blocks. • DOF = k-1-r

  13. Lab 12: X2 Chi Square Goodness of Fit for Minitab GOF, Poisson, Intrinsic • “let c3=c1*c2” “sum(c2)” • “let k1=sum(c3)/64” “print k1” • “pdf c1 c4;” “poisson k1.” • “let c5=c4*64” • Write in exp./obs. quadrats. • “let c9=(c7-c8)**2” “let c10=c9/c8” “sum c10” GOF, Any Ratio, Extrinsic • “let c3=c1*c2” “let c4=c3/c2” “sum c4”

  14. Lab 12: X2 Chi Square Independence X2 Independence • Individuals are selected at random and classified on the basis of 2 separate traits. • Relates 2 traits to each other (eye color and visual acuity), does 1 depend on other? • Whether traits occur independentlyin the sample or non-independence in sample? • Independent: the prop. of people brown, black, or red hair ≈ each eye color. • Not independent: prop. of people with different eye color ≠ (diff) hair color. • DOF = (r – 1) (c – 1) r = row c = column X2 Independence or Homogeneity Minitab • “stat”  “tables”  “Chi-square test (Two-way table in worksheet)…” • Columns containing the table: “c1-c4” * *

  15. Lab 12: X2 Chi Square Homogeneity X2 Homogeneity • Individuals from each of several pops. are selected at random and classified at some single trait with 2 or more categories. • Sample the same pop. at diff. times and want to know if the proportions of diff. types remain the same (are homogenous) or if the prop. of different types differ. • To see if a trait differs within two samples ( • Independent: the frequencies do not differ between the groups (homogenous). • Not independent: frequencies do differ between the groups (not homogenous).

  16. Lab 12: X2 Chi Square Homogeneity • Define what type of Chi Square it is. • Define that it is a Chi-Square. • Homogeneity, independence, Goodness of Fit (Poisson, medallion genetics)? • Write hypotheses • H0: visual acuity and eye color are independent of one another. • HA: visual acuity and eye color are not independent of one another. • Expected Proportion for Each “Trait” and Sum Columns/Rows

  17. Lab 12: X2 Chi Square Homogeneity • Expected Frequency for each Trait • Obtain a summed Chi Square Value (X2total) = X2calc • On the next slide. • What is your X2crit value? • X2crit = X2crit a = 0.05, df = (r-1)(c-1). • What is your p-value? • Obtained in Minitab. • Write conclusions: Accept/Reject H0? How does this relate to above question? • Accept H0: there’s no diff. b/e sexes in distance fish moved (homogenous).

  18. Lab 12: X2 Chi Square Homogeneity • Obtain a summed Chi Square Value (X2total) = X2calc

  19. Transform Data • Levene’s test  variances not equal  transform  log of data  Levene’s test again  variances equal  run ANOVA with transformed data.

  20. One-Way ANOVA • ANOVA: (analysis of variance) analyzing the variances to compare the equality of more than two populations means. Lab 13: One-Way ANOVA Sum of Squares • SSA: (sum of squares among) estimate of variance from dispersion of sample means for each group around the grand mean of all observations. • SSW: (sum of squares within) (SSE = error) estimate of variance from dispersion of observations within each of the groups around their separate means. • SST: (sum of squares total) total sum of squared deviations of observations from the grand mean of all the data. ANOVA Hypotheses • Conceptual Hypothesis (two-tailed) • H0: μ1 = μ2 = μ3 = … = μk. • HA: not all μ’s are equal. • Practical Hypothesis (one-tailed) • H0: σ2groups ≤ σ2within • HA: σ2groups > σ2within • σ2groups = σ2among • ↓ MSA = μ do not differ. • ↑ MSA = μ do differ.

  21. F-test Hypothesis (one-tailed) • H0: σ2A ≤ σ2W | do ANOVA • HA: σ2A > σ2W | no ANOVA Fcalc • MSA always in numerator. • MSW always in denominator Fcritical • Fcritical = Fk-1, N-k • MSA DOF = k – 1. • MSW DOF = N – k. Interpretation • Fcalc > Fcrit: reject ANOVA H0. • Fcalc < Fcrit: accept ANOVA H0. Sum of Squares • H0 true: (σ2 = σ2) MSA ≈ MSW. • H0 false: (σ2 ≠ σ2) MSA > MSW Hartley’s Fmax Test • Requires n = n in all groups. • Fmax • Fcritical • Top number: α = 0.05 • Bottom number: α = 0.01 • Columns = k (total # of group variance) • Rows = df = n-1 = of the group variances. • Reject H0: perform transformation of data to equalize the variances. • Bartlett’s and Levene’s test in Minitab just use the p-value. Lab 13: One-Way ANOVA Binomial Poisson

  22. Lab 13: One-Way ANOVA Minitab • Write Hypotheses for F-test (σ2 = σ2) • H0: σ2w = σ2W = σ2W | do ANOVA • HA: at least 2σ2 are not equal | no ANOVA • Write Conceptual Hypotheses (two-tailed) • H0: μ1 = μ2 = μ3 = … = μk. • HA: not all μ’s are equal. • Write Practical Hypotheses (one-tailed) • H0: σ2groups ≤ σ2within • HA: σ2groups > σ2within • σ2groups = σ2among • Report p-values, write conclusions from ANOVA. • P < 0.05, σ2groups > σ2within not all μ’s are equal do comparisons. • Comparisons (Tukey and Interval Plot) (μ’s ≠ μ’s) • Do comparisons when means aren’t equal. • Qcritα, k, v k = # of groups v = df of MSw/win α = 0.05 • No overlap: means are different (μ’s differ). overlap 0 (zero) • Overlap: means not different (μ’s don’t differ). overlap 0 (zero)

  23. Run Levene’s F-test (report p-value, transform data or not?) • Type data values. • Data  Stack  Columns… • Stack the following columns: c1-c3 | highlight columns and push “select”. • Columns in current worksheet: c6 | stack data in this column. Label c6 • Store subscripts in: c7 | column for subscripts. Label c7 • Stat  ANOVA  Test of Equal Variances… • Response: c6 | where stacked data located. • Factors: c7 | where subscripts located. • Confidence level: 95.0 | do transformations or not? • Run One-Way ANOVA “Stacked Data” • Data  stack  Columns... • Stack the following columns: c1-c4 | list of columns containing data. • Column of current worksheet: c6 | where you want stacked data stored. • Store subscripts in: c7 | where you want subscripts stored. • Stat  ANOVA  One-Way… • Response: c6 | column containing stacked data. • Factor: c7 | column containing subscripts. Lab 13: One-Way ANOVA Minitab • p-value = 0.000, then p < 0.001

  24. Interval Plot (1st way) (Graphed comparison interval) • Type data values. | should already be done at this point. • Stat  ANOVA Interval Plot… | or Data  Graph  Interval Plot… • “One Y” “With Groups” | select this graph type. • Graph Variables: c6 | column containing data. • Categorical variables grouping: c7 | column containing stacked data. • Double-click on the error bars. | new window “Edit Interval Bar” opens. • Click the “Options tab” • Type of error: “Standard Error” | type in standard error for data set. • Multiple: | ½ Qcrit • Select: “pool error across groups” | this shifts the graph. • Tukey’s Comparison (2nd way) • Stack data values | should have already done in ANOVA. • Stat  ANOVA  One-Way… | performs one-way ANOVA. • Response: c6 | column containing data. • Factor: c7 | column containing stacked data. • Select “Comparisons” button in ANOVA • Tukey’s, family error rate: 5 | desired α level. Lab 13: One-Way ANOVA Minitab

  25. Lab 15: Two-Factor ANOVA • p-value = 0.000, then p < 0.001 • Error = within.

  26. Step 1: Pretest Hypotheses • H0: σ2A = σ2B = σ2C = σ2D = σ2E = σ2F = σ2G = σ2H. (within σ2). • HA: at least 2σ2 w/in groups are not equal. Step 2: type data values in Minitab, label c6, c7, c8 • Site 1 = 1 Site 2 = 2 • Type the data values in Minitab. | unstacked data, columns 1 -4. • Data  Stack  Columns… | will stack the data. • Stacking the following columns: c1-c4 | these columns will be stacked. • Column of current worksheet: c6 | stacked data in this column. • Store subscripts in: c7 | Factor A: subscripts this colmn. • Use variable names in subscript column | Allows #’s as subscripts. • Calc  Make Patterned Data  Simple Set of Numbers… • Store patterned data in: c8 | Factor B: subscripts this colmn. • From first value: 1 | small Factor B value. • To last value: 2 | large Factor B value. • In steps of: 1 | difference of two (2 – 1 = 1). • List each value 5 | # of obs./data values in 1 cell. • List the whole sequence: 4 | diff types Factor A (# of col). Lab 15: Two-Factor ANOVA

  27. Step 3: Run Levene’s Test (p-value) • Stat  ANOVA  Test for Equal Variances… • Response: c6 | contains stacked data. • Factors: c7 c8 | contains subscripts. • p-value: 0.297, accept H0, σ2w/in groups = σ2w/in groups, no transformations. Step 4: ANOVA Hypotheses (2 way = conceptual only) • H1: H0: μnone = μfert = μirrig = μfert x irrig | Factor A • HA: not all μ’s are equal. • H2: H0: μsite1= μsite2 | Factor B • HA: not all μ’s are equal. • H3: H0: no interaction exists between treatment and site on the mean weight of Poplar trees (independent). • HA: interactions exist between treatment and site on the mean weight of Poplar trees (dependent). Step 5: run ANOVA, report p-values, write Conclusions • H1: p < 0.001, reject H0, not all μ’s are equal. • H2: p < 0.001, reject H0, not all μ’s are equal. • H3: p < 0.001, reject H0, interactions exist b/e treatment & sites on mean weights. Lab 15: Two-Factor ANOVA

  28. Lab 15: Two-Factor ANOVA Step 5: run ANOVA, report p-values, write Conclusions • Stat  ANOVA  General Linear Model | run two-factor ANOVA. • Response: c6 | stacked data. • Model: c7 c8 c7*c8 | two factors and the interaction Step 6: run Interaction Plot (only if you reject H3 H0) • p-value < 0.001, reject H3 H0, so do interaction plot. • Stat  ANOVA  Interaction Plots… | Interaction Plot. • Responses: c6 | stacked data. • Factors: c7 c8 | contains subscripts. • Display full interaction plot matrix | select this.

  29. Interaction Plot on Left • Site 1: overall site 1 had higher weights within the individual treatment groups. • Site 2: overall site 2 had the lower weights within the individual treatment groups. Interaction Plot on Right • All 4 Treatments: with all 4 treatments (none, fertilizer, irrigation, f x i) as you go from site 1 to site 2, there’s a decrease in the weights of the trees in one year. • None: weights of site 1, no treatment are higher than the weights in site 2 without treatment; and the weights are lower compared to the rest of the treatments. • Fertilizer: weights in site 1 are higher than the weights in site 2 when fertilizer was added; the weights are lower than irrig and fert/irrig but higher than no treatment. • Irrigation: weights in site 1 are higher than the weights in site 2 when fertilizer was added; the weights are ↓ than fert/irrig but higher than fertilizer & no treatment. • Fert. x Irrig: weights in site 1 are higher than weights in site 2 when fert/irrigation were added; all other weights are lower when given other treatments. • In general: suggests that the weights of the Poplar trees tend to be highest, whether in site 1 or site 2, if they are treated with both fertilizer and irrigation; treatment site 1 had the highest weights within treatments and overall treatments. Lab 15: Two-Factor ANOVA

  30. Lab 16: Regression Step 1: Plot your data, is it linear? Create scatter plot. • Graph  scatterplot  simple  • Y variable: c2 X variable: c1 • Copy and paste graph into a document, state “looks linear” Step 2: Report Null and Alternative • H0: β = 0. no significant linear relationship between _____ & _____ • HA: β ≠ 0. there is significant linear relationship between _____ & _____ Step 3: run one-way ANOVA or one-sample t-test • Stat  regression  Regression • Response: c1 | col dependent variable (Y) • Predictors: c2 | col. Independent variable (X) • Storage: Residuals, fits Step 4: Report equation, report R2 (in Minitab  R-Sq) • y = 2.972 + 1.79(°C) R2 = 95.2% of heart beats that can be explained by reg. line. Dependent and independent Variable • X = independent variable = doesn’t change (temp, age, pH) • Y = dependent variable = change in relation to X (breeding changes rel. to temp).

  31. Lab 16: Regression Step 5: Graph equation (w/ CI) fitted line plot • Stat  Regression  Fitted line plot… • Response Y: c2 | dependent variable. • Response X: c1 | independent variable. • Select Options tab Options • Select display confidence interval, display prediction interval Step 6: Graph residuals, plot, and do interpretation (paragraph). • Stat  regression  Regression • Response: c1 | col dependent variable (Y) • Predictors: c2 | col. Independent variable (X) • Select Graph • Residuals vs. variable c1 | col independent variable (X) Reasons why t-test more flexible than ANOVA • Alternative hypothesis can be one-tailed or two-tailed. • β = doesn’t have to be zero, can be another number, can test various H0’s.

  32. Step 1: Report Null and Alternative • H0: ρ = 0 no correlation ρ = population correlation coefficient. • HA: ρ≠ 0 correlation r = sample correlation coefficient. Step 2: Report p-value and interpretation. • Stat  Basic statistics  Correlation… • Variables: c1 c2 | enter the variables Y1 and Y2. • Report the p-value and what the p-value means. • H0: r = 0 no correlation exists between 2 variables. • HA: r ≈ +1 implies strong positive association b/e ____ & ____ (↑ X  ↑Y). • HA: r ≈-1 implies strong negative association b/e ____ & ____ (↑ X  ↓ Y). Step 3: Report r-value and interpretation • Pearson's correlation = r-value = 0.976 • Strong positive association between heart beat and temp in frogs (r = 0.976). Step 4: Basic scatterplot of values • Use from Regression. Finding values out of data or in data • In our example we cant find values for ex. = 28 because it is our of the range of values that we have, so type “unable to do so.” Lab 16: Correlation

More Related