1 / 25

TH-57 Transmission / Hydraulic Review

TH-57 Transmission / Hydraulic Review. The transmission is placed approximately at the midpoint of the travel. The two-stage planetary transmission system provides a gear reduction of .

vance-pace
Télécharger la présentation

TH-57 Transmission / Hydraulic Review

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. TH-57 Transmission / Hydraulic Review

  2. The transmission is placed approximately at the midpoint of the travel. The two-stage planetary transmission system provides a gear reduction of . The transmission also drives an accessory drive gear that powers the , the , and the . center-of-gravity 15.22:1 transmission oil pump hydraulic pump Nr tach-gen

  3. Main Drive Shaft Failure ?

  4. Note During cold-weather operations, temporary conditions of psi maximum engine oil pressure and/or psi maximum transmission oil pressure are allowable following an engine start. NATOPS 150 70

  5. Flight Profile ?

  6. IMMINENT TRANSMISSION FAILURE

  7. TRANS OIL PRESS / OIL TEMP CAUTION LIGHTS

  8. HYDRAULIC SYSTEM

  9. Hydraulic fluid is gravity fed from the reservoir to the pump assembly, which pressurizes the fluid and sends it through the pressure regulator valve. This valve regulates system pressure to approximately psi. 600 +/-50

  10. The hydraulic pressure switch, located downstream from the filter, continually monitors system pressure and will close if the pressure falls below psi. A hydraulic pressure light illuminates when the switch closes and goes out when the pressure rises above psi. 300 400

  11. Sequence valve Differential relief valve Pilot valve

  12. Sequence Valve • Hydraulic pressure on the sequence valve pushes down on the poppet valve and spring, thereby opening a return port for fluid to return to the reservoir. • If pressure is lost, the sequence valve closes, trapping fluid in the servo which will continue to dampen main rotor feedback (vibrations).

  13. Differential Relief Valve • The function of the differential relief valve is to cause fluid to be routed to the return line if back pressure exceeds system pressure. • Heavy main rotor loads are one possible source of excessive back pressure

  14. Pilot Valve • The pilot valve is mechanically connected to the flight controls and receives input from movement of the controls. This causes the pilot valve to move and allow fluid under 600 psi pressure to enter the actuator, which then moves the flight controls. When the flight controls reach the desired position, the pilot valve centers and fluid flow to the actuator is stopped.

More Related