1 / 10

Aggregation based channel bonding

Aggregation based channel bonding. Authors:. Date: 2016-01-1 8. Abstract. Channel bonding framework for NG60 has been proposed in [1]. The framework includes contiguous (wideband) bonding mode and carrier (channel) aggregation mode.

vanida
Télécharger la présentation

Aggregation based channel bonding

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Hiroyuki Motozuka, Panasonic Corporation Aggregation based channel bonding Authors: • Date: 2016-01-18

  2. Hiroyuki Motozuka, Panasonic Corporation Abstract • Channel bonding framework for NG60 has been proposed in [1]. The framework includes contiguous (wideband) bonding mode and carrier (channel) aggregation mode. • In this presentation, we propose an abstract carrier aggregation scheme and a text proposal of carrier aggregation for 11ay SFD [2]. [1] 11-15-0335-02-ng60-channel-bonding-framework [2] 11-15-1358-00-00ay-specification-framework-for-tgay

  3. Hiroyuki Motozuka, Panasonic Corporation Wideband channel bonding and aggregation for 11ay • Wideband channel bonding (CB) • Increase throughput using higher sampling rate • Channel aggregation (CA) • Simultaneous transmission on multiple channels • Flexible channel usage (-> see next slide) • We recommend to enable both modes. 3.52 GHz f ch1 ch2 1.76 GHz 1.76 GHz f ch1 ch2

  4. Hiroyuki Motozuka, Panasonic Corporation Consideration on CA:contiguous and non-contiguous channels • CA on contiguous channel • CA on non-contiguous channel • We suggest 11ay to enable both channel occupation schemes. 1.76 GHz 1.76 GHz f ch1 ch2 1.76 GHz 1.76 GHz f ch1 ch3

  5. Hiroyuki Motozuka, Panasonic Corporation Challenge of aggregation:adjacent channel interference (ACI) • In contiguous channel aggregation, Adjacent Channel Interference (ACI) is caused due to PA non-linearity. • We conducted simulation to evaluate the impact on PA back-off and transmit EVM. PA non-linearity model is based on [3].[3] 11-09/0296r16 TGad Evaluation Methodology

  6. Hiroyuki Motozuka, Panasonic Corporation Simulation results • To achieve same EVM level, additional PA back-off of 1.0dB is required for 16QAM, 3-channel CA. • For QPSK, BO is limited by Tx mask, rather than EVM. • Though additional 1dB PA back-off is required, we suggest not to rule out contiguous CA, considering its benefits.

  7. Hiroyuki Motozuka, Panasonic Corporation Conclusion • We propose to enable contiguous and non-contiguous channel aggregation for 11ay.

  8. Hiroyuki Motozuka, Panasonic Corporation References • [1] 11-15/0335r2 Framework for NG60 Channel Bonding • [2] 11-15/1358r0 Specification Framework for TGay • [3] 11-09/0296r16 TGad Evaluation Methodology

  9. Hiroyuki Motozuka, Panasonic Corporation Straw Poll • Do you agree to insert the following in section 6.1 of the SFD • “The 11ay specification shall support contiguous and non-contiguous channel aggregation of at least two 2.16GHz channels.“

  10. Hiroyuki Motozuka, Panasonic Corporation Motion • Instruct the editor to insert the following in section 6.1 of the SFD • “The 11ay specification shall support contiguous and non-contiguous channel aggregation of at least two 2.16GHzchannels.“

More Related