1 / 32

Capacitance

Capacitance. PHY 2049 Chapter 25. Chapter 25 Capacitance In this chapter we will cover the following topics: -Capacitance C of a system of two isolated conductors. -Calculation of the capacitance for some simple geometries.

verne
Télécharger la présentation

Capacitance

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Capacitance PHY 2049 Chapter 25

  2. Chapter 25 Capacitance In this chapter we will cover the following topics: -Capacitance C of a system of two isolated conductors. -Calculation of the capacitance for some simple geometries. -Methods of connecting capacitors (in series , in parallel). -Equivalent capacitance. -Energy stored in a capacitor. -Behavior of an insulator (a.k.a. dielectric) when placed in the electric field created in the space between the plates of a capacitor. -Gauss’ law in the presence of dielectrics. (25 - 1)

  3. Capacitors

  4. Capacitor • Composed of two metal plates. • Each plate is charged • one positive • one negative • Stores energy SYMBOL

  5. A simple Capacitor TWO PLATES WIRES Battery

  6. INSIDE THE DEVICE

  7. What is STORED in the capacitor? • An Electric Field • Energy • Charge • All three • None of these

  8. d Air or Vacuum E - Q +Q Symbol Area A V=Potential Difference Two Charged Plates(Neglect Fringing Fields) ADDED CHARGE

  9. Where is the charge? +++++ + - - - - - - d AREA=A s=Q/A Air or Vacuum E - Q +Q Area A V=Potential Difference

  10. One Way to Charge: • Start with two isolated uncharged plates. • Take electrons and move them from the + to the – plate through the region between. • As the charge builds up, an electric field forms between the plates. • You therefore have to do work against the field as you continue to move charge from one plate to another. The capacitor therefore stores energy!

  11. Capacitor Demo

  12. d Air or Vacuum E - Q +Q Gaussian Surface Area A V=Potential Difference More on Capacitors Same result from other plate!

  13. DEFINITION - Capacity • The Potential Difference is APPLIED by a battery or a circuit. • The charge q on the capacitor is found to be proportional to the applied voltage. • The proportionality constant is C and is referred to as the CAPACITANCE of the device.

  14. UNITS • A capacitor which acquires a charge of 1 coulomb on each plate with the application of one volt is defined to have a capacitance of 1 FARAD • One Farad is one Coulomb/Volt

  15. Continuing… • The capacitance of a parallel plate capacitor depends only on the Area and separation between the plates. • C is dependent only on the geometry of the device!

  16. After the switch is closed, how much charge passed through the capacitor? • C/V • V/C • CV • C+V V

  17. P S N (25 - 6)

  18. Units of e0 pico

  19. Simple Capacitor Circuits • Batteries • Apply potential differences • Capacitors • Wires • Wires are METALS. • Continuous strands of wire are all at the same potential. • Separate strands of wire connected to circuit elements may be at DIFFERENT potentials.

  20. NOTE • Work to move a charge from one side of a capacitor to the other is = qEd. • Work to move a charge from one side of a capacitor to the other is qV • Thus qV = qEd • E=V/d As before

  21. TWO Types of Connections SERIES PARALLEL

  22. V CEquivalent=CE Parallel Connection

  23. q -q q -q V C1 C2 Series Connection The charge on each capacitor is the same !

  24. q -q q -q V C1 C2 Series Connection Continued

  25. More General

  26. Example C1=12.0 uf C2= 5.3 uf C3= 4.5 ud C1 C2 series (12+5.3)pf (12+5.3)pf V C3

  27. E=e0A/d +dq +q -q More on the Big C • We move a charge dq from the (-) plate to the (+) one. • The (-) plate becomes more (-) • The (+) plate becomes more (+). • dW=Fd=dq x E x d

  28. So….

  29. Parallel Plate Cylindrical Spherical Not All Capacitors are Created Equal

  30. Spherical Capacitor

  31. Calculate Potential Difference V (-) sign because E and ds are in OPPOSITE directions.

  32. Continuing… Lost (-) sign due to switch of limits.

More Related