1 / 41

Chapter 15 Acid-Base Titrations & pH

Chapter 15 Acid-Base Titrations & pH. 15.1 Aqueous Solutions & The Concept of pH. Self-Ionization of Water . Autoprotolysis : H 2 O (l) + H 2 O (l) → H 3 O + ( aq ) + OH - ( aq ) Molarity at 25°C 1.0 x 10 -7 moles H 3 0 + per liter of solution

vlad
Télécharger la présentation

Chapter 15 Acid-Base Titrations & pH

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Chapter 15Acid-Base Titrations & pH 15.1 Aqueous Solutions & The Concept of pH

  2. Self-Ionization of Water • Autoprotolysis: H2O (l) + H2O (l)→ H3O+ (aq) + OH- (aq) • Molarity at 25°C 1.0 x 10-7 moles H30+ per liter of solution 1.0 x 10-7 moles OH- per liter of solution

  3. Ionization Constant for Water (KW) • KW= [H3O+][OH-] = (1.0 x 10-7M)(1.0 x 10-7M) = 1.0 x 10-14M2 • KW is a constant at ordinary ranges of room temperatures Neutral: [H3O+] = [OH-] Acidic: [H3O+] > [OH-] Basic: [H3O+] < [OH-]

  4. Ion Concentration in Water

  5. Calculating [H3O+] and [OH-] • Assume that strong acids and bases are completely ionized in solution: 1.0 M H2SO4 = 2.0 M H3O+ 1.0 M Ba(OH)2 = 2.0 M OH-

  6. pH Calculations and the Strength of Acids and Bases • Weak acids and weak bases cannot be assumed to be 100% ionized • [H30+] and [OH-] cannot be determined from acid and base concentrations, and must be determined experimentally

  7. H+, OH-, and pH

  8. pH Scale

  9. The pH Scale • Due to the variations in soln’s, there are many possible concentrations of hydronium & hydroxide ions for solutions. • Usually this spans 10-14M to 1 M • In order to compare substances, the pH scale was developed. • Ex: 6 M sol’n of HCl has a H3O+ molarity of 6 M 6 M sol’n of HC2H3O2 has a H3O+ molarity of 0.01M

  10. pH • pH is a scale in which the concentration of hydronium ions in solution is expressed as a number ranging from 0 to 14. • Instead of referring to a scale of 1 to 10-14, the pH scale is much easier to use. • pH is the negative of the exponent of the hydronium concentration.

  11. Calculating pH & pOH • pH The negative of the common logarithm of the hydronium ion concentration pH = - log [H3O+] • pOH The negative of the common logarithm of the hydroxide ion concentration pOH = - log [OH-] • pH + pOH = 14.0

  12. pH Example • A solution with a hydronium concentration of 10-11M has a pH of 11. • What would be the pH of a solution with a hydronium concentration of 10-6M? pH = 6

  13. Finding [H3O+], [OH-] from pH, pOH [H3O+] = 10-pH [OH-] = 10-pOH

  14. Interpreting the pH Scale • The pH scale is divided into 3 main areas: • If it is exactly 7, it is neutral. • If it is less than 7, it is acidic. • If it is more than 7, it is basic.

  15. pH Scale

  16. Interpreting the pH Scale • As pH decreases below 7, hydronium ion concentrations increase & hydroxide ion concentrations decrease. **pH values differ in factors of 10. Ex: An acidic sol’n w/ a pH of 3 has 10 times the hydronium concentration as a sol’n w/ a pH of 4.

  17. Interpreting the pH Scale • As pH increases above 7, hydroxide ion concentrations increase & hydronium ion concentrations decrease. Ex: A basic sol’n w/ a pH of 9 has 10 times the hydroxide concentration as a sol’n w/ a pH of 8. • A neutral sol’n has equal concentrations of hydronium and hydroxide ions.

  18. pH + pOH = 14

  19. Significant Figures & pH • Significant digits when calculations involve logarithms are dependant only on the number of digits to the right of the decimal. • Example: [H3O+] = 2.5 x 10-3 pH = 2.60 This concentration has 2 significant digits So the pH will have 2 digits to the right of the decimal point pH = ?????

  20. Practice 1. Determine the [H3O+] & [OH-] in a 0.01 M solution of HClO4. 2. An aqueous solution of Ba(OH)2 has a [H3O+] of 1 x 10-11 M. What is the [OH-]? What is the molarity of the solution? 3. Determine the pH of a 1 x 10-4 M solution of HBr. 4. Determine the pH of a 5 x 10-4 M solution of Ca(OH)2. 5. What is the pH of a solution whose [H3O+] = 6.2 x 10-9 M? 6. Determine the pH of a 0.00074 M solution of NaOH.

  21. More Practice • What are the [H3O+] & [OH-] of a solution if its pH = 9.0? • The pH of a solution if 10.0. What is the concentration of hydroxide ions in the solution? If the solution is Sr(OH)2 (aq), what is its molarity? • The pH of a hydrochloric acid solution for cleaning tile is 0.45. What is the [H3O+] in the solution? • A shampoo has a pH of 8.7. What are [H3O+] & [OH-] in the shampoo?

  22. Practice Answers! • [H3O+] = 1 x 10-2 M, [OH-] = 1 x 10-12 M • [OH-] = 1 x 10-3 M, [Ba(OH)2] = 5 x 10-4 M • pH = 4.0 • pH = 11.0 • pH = 8.21 • pH = 10.87 • [H3O+] = 1 x 10-9 M, [OH-] = 1 x 10-5 M • [OH-] = 1 x 10-4 M, [Sr(OH)2] = 5 x 10-5 M • [H3O+] = 0.35 M • [H3O+] = 2 x 10-9 M, [OH-] = 5 x 10-6 M

  23. Chapter 15Acid-Base Titrations & pH 15.2 Determining pH & Titrations

  24. Indicators and pH Meters • Acid-Base Indicators Compounds whose colors are sensitive to pH • Transition Interval pH range over which an indicator color change occurs • Indicators are useful when they change color in a pH range which includes the endpoint of the reaction

  25. Using Indicators to Measure pH • A pH meter is the most accurate way to measure pH. • Measures voltage difference between two electrodes • It will determine the exact pH of a sol’n. • There are also colored dyes that will change in a predictable way according to a standard chart. These are called indicators.

  26. pH Indicators and theirranges

  27. Acid-Base Titration • Titration Controlled addition of the measured amount of a solution of a known concentration required to react completely with a measured amount of sol’n of unknown concentration • Equivalence Point The point at which the solutions used in a titration are present in chemically equivalent amounts • Titration Curves: End point The point in a titration at which the rxn is just completed

  28. Titration Curves

  29. Molarity and Titration • Standard Solution A solution that contains the precisely known concentration of a solute, used in titration to find the concentration of the solution of unknown concentration • Primary Standard A highly purified solid compound used to check the concentration of the known solution in a titration

  30. Calculations with Molar Titrations • Start with the balanced equation for the neutralization reaction and determine the chemically equivalent amounts of the acid and base • Determine the moles of acid (or base) from the known solution used during the titration • Determine the moles of solute of the unknown solution used during the titration • Determine the molarity of the unknown solution

  31. Titration Calculations

  32. More Practice! • How many moles of HCl are in 31.15 mL of a 0.688 M solution? • How many moles of NaOH would neutralize 20.0 mL of a 13.9 M solution of H2SO4? • How many milliliters of a 2.76 M KOH solution contain 0.0825 mol of KOH?

  33. More Practice! 4. A 25.00 mL sample of a solution of RbOH is neutralized by 19.22 mL of a 1.017 M solution of HBr. What is the molarity of RbOH? 5. If 29.96 mL of a solution of Ba(OH)2 requires 16.08 mL of a 2.303 M solution of HNO3 for complete titration, what is the molarity of the Ba(OH)2 solution? 6. You have a vinegar solution believed to be 0.83 M. You are going to titrate 20.00 mL of it with a NaOH solution known to be 0.519 M. At what volume of added NaOH would you expect to see an endpoint?

  34. Answers! • 2.14 x 10-2 mol HCl • 5.56 x 10-2 mol NaOH • 29.9 mL • 0.7819 M RbOH • 0.6180 M Ba(OH)2 • 32 mL NaOH

  35. Buffers • Buffers have many important biological functions. They keep a solution at a constant pH, when manageable amounts of acid of base are added. • Ex: Your blood is a buffer! Its pH is very slightly basic at 7.4. Even though you may eat many different types of foods or medicines, your blood pH stays relatively stable, varying only about 0.1. That means your blood controls its own pH!

  36. Buffers • Buffers contain ions or molecules that react with hydronium or hydroxide if they are added to the solution. That means, even if you add an acid or a base, your pH will stay the same. • To make a buffer, you combine a weak acid or a weak base with its corresponding salt.

  37. Buffers • Example: Ammonia is combined with its salt, NH4Cl, in sol’n: • If acid is added to this solution, ammonia reacts with the H+ : NH3 (aq) + H+ (aq) → NH4+ (aq) • If a base is added to this solution, the NH4+ from the dissolved salt will react with the OH- : NH4+ (aq) + OH-(aq) → NH3 (aq) + H2O (l)

  38. Buffers • Blood’s pH is regulated by many systems, but dissolved CO2 is a very important method. Carbonic acid, H2CO3, and the hydrogen carbonate ion, HCO3-, are both dissolved in your blood. CO2(g) + H2O (l) → H2CO3 (aq) • If you add OH- : H2CO3 (aq) + OH- → HCO3- (aq) + H2O (l) • If you add H+ : HCO3- (aq) + H+ → H2CO3 (aq)

  39. Buffers • Your lungs control the amount of carbon dioxide in your body. If your body takes in too much carbon dioxide, your blood may become too acidic so you may yawn to lower the concentration of carbonic acid by expelling CO2.

  40. Buffers • If you hyperventilate, too much CO2 is expelled, which causes the concentration of carbonic acid to become too low, and your blood may become too basic. Breathing into a paper bag will increase the concentration of CO2 in your lungs and restore the proper pH.

More Related