1 / 10

Group 16 Screwheads

Group 16 Screwheads. Mike Harrison, Jeremy Ozer Mark Brandau. Design Changes. Still using suspension bridge idea, but have greatly reinforced the base and have improved arm Improvements greatly increase strength against deflection

walker-jefferson
Télécharger la présentation

Group 16 Screwheads

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Group 16Screwheads Mike Harrison, Jeremy Ozer Mark Brandau

  2. Design Changes • Still using suspension bridge idea, but have greatly reinforced the base and have improved arm • Improvements greatly increase strength against deflection • Gone from rack and pinion to moment arm to lift weight, using the servo itself as a counterweight and grabbing the screw on the weight with a hook

  3. Performance • Torque – maximum necessary is 48 oz-in. Motor can put out 54 oz-in • Motor generates sufficient torque to lift fully, but we are encountering too much deflection at present to reach it

  4. Future Improvements • Further improve resistance to deflection • Drop weight of system by removing portions of baseplate • Optimize servo setup • Optimize arm lengths

  5. Questions?

More Related