1 / 17

3d 검사 TEST

3d 검사 TEST. 3d scan camera. 3D Profile = 35,000 /s Interface = camera link or g ethernet Grey line resolution = 1536 3d line profile resolution = 1536 Line laser = line length 70 mm, line width = 10 um, class 1 laser. 3D 비젼 검사 사양. 검사 항목. 제품사양 : 40 MM * 40 MM

walter-clay
Télécharger la présentation

3d 검사 TEST

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 3d 검사 TEST

  2. 3d scan camera 3D Profile = 35,000 /s Interface = camera link or g ethernet Grey line resolution = 1536 3d line profile resolution = 1536 Line laser = line length 70 mm, line width = 10 um, class 1 laser

  3. 3D 비젼 검사 사양

  4. 검사 항목 • 제품사양 : 40 MM * 40 MM • 검사항목 : 치수 (가로 x 세로 x 높이) , 깨짐 (검출정도 0.1mm) • 검사 조건 : 이동시 검사( 등속이동) • 검사시간 : 1 sec • 위치결정 : +- 1 MM 이내 위치결정 필요 . (x, y 방향) • guide pin hole 필요없음 • 인터페이스 : 검사항목별 위치출력. 칼라 검사동기신호 등 • 카메라 대수 : 3d measuring camera 1대, 결함 영상확인용 카메라 1대

  5. 검사기 3D SENSOR CAMERA BASE 리니어 모션

  6. Sample 이미지 촬영 – 용접 끊김

  7. Sample 이미지 촬영 – 기포 및 홀 1

  8. Sample 이미지 촬영 – 기포 및 홀 2

  9. Sample 이미지 촬영 – Spatter 1

  10. 2D, 3D 이미지 비교(방법) 3D 2D 2D– 용접 부위의 조명 반사를 하여 측정 3D – 용접 부위를 입체적으로 촬영하여 측정

  11. 3 | 양품 3D 검사 1 용접 부위

  12. 3 | 양품 3D 검사 2

  13. 3 | 용접 끊김 & 불일치 1 용접 비 용접 용접 비 용접

  14. 3 | Spatter 2

  15. 3 | Hole & 패임 1

  16. 3 | Hole & 패임 1

  17. 3 | Hole & 패임 2

More Related