1 / 3

Introduction to Lecture 1 TMMI09, autumn 2011 (last updated 2011-08-26)

Introduction to Lecture 1 TMMI09, autumn 2011 (last updated 2011-08-26). Aim. The aim of this lecture is to give a short introduction to the course Vibrations and fatigue in mechanical structures, TMMI09, autumn 2011. More specifically

wesley-green
Télécharger la présentation

Introduction to Lecture 1 TMMI09, autumn 2011 (last updated 2011-08-26)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Introduction to Lecture 1TMMI09, autumn 2011 (last updated 2011-08-26)

  2. Aim • The aim of this lecture is to give a short introduction to the course Vibrations and fatigue in mechanical structures, TMMI09, autumn 2011.More specifically • a short overview of the course content will be given (see below) • the course information will be presented • the study of vibrations in one degree of freedom (1-d.o.f.) systems will be started • Please see the course home page for the latter materialhttp://www.solid.iei.liu.se/Education

  3. Course content A body or structure subjected to repeated loadings can fail, even though themagnitude of the applied loading is far below any yield- or static failure limit -we refer to this phenomenon as fatigue. Generally, the higher the load amplitude is, the shorter the life will be(in terms of loading cycles). By obvious reasons fatigue failures may be both dangerous and expensive,and must therefore be avoided. An additional complicating factor is that fatiguefailures often occur without any previous "warnings", and are thereforeespecially awkward. As a result, fatigue design has become an increasinglyimportant task in the modern product design process. Thus, one major aim of the course is to provide some basic skills inclassical fatigue design! However, since the local stresses often are raised by dynamic reasons,the first part of the course will be designated to basic vibration theory.

More Related