1 / 10

Measurement

Measurement. Micrometer. Digital Micrometer. The micrometer is used for where accurate measurement (to 1000 th of a mm) is required. Micrometer. Micrometer Parts. Anvil Glass hard and optically flat Spindle Moves ½ mm for every full rotation of the Sleeve

weymouth
Télécharger la présentation

Measurement

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Measurement

  2. Micrometer Digital Micrometer The micrometer is used for where accurate measurement (to 1000th of a mm) is required. Micrometer

  3. Micrometer Parts Anvil Glass hard and optically flat Spindle Moves ½ mm for every full rotation of the Sleeve Spindle Lock Locks spindle in place Barrel & Sleeve Used to obtain measurements Ratchet Prevents over tightening (and thus damaging) micrometer

  4. Reading a Micrometer When reading a Micrometer it is important to remember that one turn of the spindle represents ½ mm.

  5. Vernier Calipers Named after its inventor the Vernier scale is incorporated in many measuring instruments, the most commonly used of which is the sliding calliper gauge as shown above. These gauges can be used for both internal and external measurement.

  6. Using Vernier Calipers External Measurement Vernier Calipers can be used to measure both internal and external dimensions Internal Measurement

  7. Reading Vernier Calipers Imperial Scale Metric Scale In the illustration above you first read this scale This reads 2.4cm Then you look along the this scale and find where two lines line up This adds a further 0.062mm Add these two figures together to give 2.4 + 0.062 = 2.462cm

  8. Depth Gauge As shown in the diagram on the left the Depth Gauge can be used to measure the depth of holes

  9. Calipers Internal Calipers External Calipers Setting Calipers Calipers can be used to gauge the size of an object. As Calipers have no in built scale all dimensions must be set with a rule (as shown). This makes Calipers less accurate than both the Micrometer and Vernier Calipers

  10. The End

More Related