1 / 47

Understanding Chemical Equilibrium: Equilibrium Constants and Significance

Explore the concept of chemical equilibrium, equilibrium constants KC and Kp, and their significance in determining concentrations at equilibrium in gas-phase reactions. Learn how to calculate equilibrium constants and apply them in various examples.

williechase
Télécharger la présentation

Understanding Chemical Equilibrium: Equilibrium Constants and Significance

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CHAPTER 15 Chemical Equilibrium

  2. Equilibrium Consider a system consisting of a mixture of gases at some temperature T where the following general and reversible chemical reaction is taking place. a A(g) + b B(g)  c C(g) + d D(g) where A, B, C, and D are chemical substances (reactants or products), a, b, c, and d are stoichiometric coefficients (numbers that balance the reaction) and “” indicates that the reaction can proceed in both the forward and reverse direction. We define chemical equilibrium for this system as the state where the concentrations of reactants and products no longer change with time, and where there is a dynamic balance between processes taking place.

  3. Example Consider the following reaction taking place in the gas phase N2O4(g)  2 NO2(g) In both of the above systems the concentrations of NO2 and N2O4 eventually reach a constant value. At this point the system is at equili-brium. Note that this is a dynamic equilibrium. Reactants continue to be converted into products, and products into reactants, but at equilibrium the two processes are in balance.

  4. Equilibrium Constant Let us return to our general gas phase reaction a A(g) + b B(g)  c C(g) + d D(g) The equilibrium constant for this reaction is defined as the ratio of the concentrations (partial pressures) of the products divided by the concentration (partial pressures) of the reactants, at equilibrium, raised to their stoichiometric coefficients. For reactions of gases we can always define two equilibrium constants, KC (in terms of concentration; molarity) and Kp (in terms of partial pressure; atmospheres). KC = [C]c [D]d Kp = (pC)c (pD)d [A]a [B]b (pA)a (pB)b

  5. Examples: N2O4(g)  2 NO2(g) 2 H2(g) + O2(g)  2 H2O(g)

  6. Examples: N2O4(g)  2 NO2(g) KC = [NO2]2 Kp = (pNO2)2 [N2O4] (pN2O4) 2 H2(g) + O2(g)  2 H2O(g) KC = [H2O]2 Kp = (pH2O)2 [H2]2 [O2] (pH2)2 (pO2)

  7. Significance of the Equilibrium Constant The significance of the equilibrium constant lies in the fact that for a chemical reaction taking place at a particular temperature T, the equilibrium constant (KC or Kp) has a particular numerical value. This means that no matter what the starting concentrations or partial pressures for the system, at equilibrium the ratio of the concentrations (partial pressures) of the products divided by the concentrations (partial pressures) of the reactants, raised to their appropriate powers, will be equal to KC (or Kp). This gives us a method for determining the concentrations (or partial pressures) of reactants and products that will be present in the system when it has achieved equilibrium.

  8. Comments 1) Equilibrium constants have no units. That is because what appears in the expressions for the equilibrium constant is actually the concentration or partial pressure divided by our standard concentration or partial pressure unit. N2O4(g)  2 NO2(g) KC = {[NO2]/(1. M)}2 = [NO2]2 {[N2O4]/(1.M)} [N2O4] Kp = {(pNO2)/(1. atm)}2 = (pNO2)2 {(pN2O4)/(1. atm)} (pN2O4)

  9. 2) When both KC and Kp can be written their are related. From Dalton’s law of partial pressures pAV = nART Divide both sides by VRT nA = [A] = pA and so pA = (RT) [A] V RT For our generic gas phase reaction a A(g) + b B(g)  c C(g) + d D(g) Kp = (pC)c (pD)d = {RT [C] }c {RT [D] }d = [C]c [D]d (RT)[(c+d)-(a+b)] (pA)a (pB)b {RT [A] }a {RT [B] }b [A]a [B]b or Kp = KC (RT)ng where ng = (c + d) - (a + b) = change in the number of moles of gas per mole of reaction.

  10. 3) The way in which the equilibrium constant is written depends on how the balanced reaction is written. Example: N2O4(g)  2 NO2(g) KC = [NO2]2 [N2O4] 2 NO2(g)  N2O4(g) KC = [N2O4] = 1 [NO2]2 KC 2 N2O4(g)  4 NO2(g) KC = [NO2]4 = (KC)2 [N2O4]2 One needs to specify the reaction before writing KC or Kp.

  11. 4) For heterogeneous equilibrium, or equilibrium involving other things besides gases, we can always write a value for KC. We do this as follows: For solids, liquids, and solvents, put 1 in for the concentration. This indicates that the substance must be present at equilibrium, but the amount present does not matter. For solutes, gases, put the molar concentration (MB = mol/L). Example: Write KC for the following reactions. a) CaCO3(s)  CaO(s) + CO2(g) b) NH3(aq) + H2O()  NH4+(aq) + OH-(aq) c) CO2(g) + H2O() H2CO3(aq) d) 2 H2(g) + O2(g)  2 H2O()

  12. a) CaCO3(s)  CaO(s) + CO2(g) KC = (1) [CO2] = [CO2] (1) b) NH3(aq) + H2O()  NH4+(aq) + OH-(aq) KC = [NH4+] [OH-] = [NH4+] [OH-] [NH3] (1) [NH3] c) CO2(g) + H2O() H2CO3(aq) KC = [H2CO3] = [H2CO3] [CO2] (1) [CO2] d) 2 H2(g) + O2(g)  2 H2O() KC = (1) [H2]2 [O2]

  13. 5) For heterogeneous equilibrium, or equilibrium involving other things besides gases, we can sometimes also write a value for Kp. To decide if this can be done, proceed as follows: a) Write the expression for KC for the reaction. b) If every concentration appearing in KC involves a gas, replace concentration with partial pressure to get Kp. c) If there are concentrations appearing in KC that do not involve a gas, an expression for Kp cannot be written. Example: When possible, write Kp for the following reactions. a) CaCO3(s)  CaO(s) + CO2(g) b) NH3(aq) + H2O()  NH4+(aq) + OH-(aq) c) CO2(g) + H2O() H2CO3(aq) d) 2 H2(g) + O2(g)  2 H2O()

  14. a) CaCO3(s)  CaO(s) + CO2(g) KC = (1) [CO2] = [CO2] Kp = (pCO2) (1) b) NH3(aq) + H2O()  NH4+(aq) + OH-(aq) KC = [NH4+] [OH-] = [NH4+] [OH-] Kp n/a (not available) [NH3] (1) [NH3] c) CO2(g) + H2O() H2CO3(aq) KC = [H2CO3] = [H2CO3] Kp n/a (not available) [CO2] (1) [CO2] d) 2 H2(g) + O2(g)  2 H2O() KC = (1) Kp = 1 [H2]2 [O2] (pH2)2 (pO2)

  15. 6) We can get equilibrium constants for new reactions by finding the appropriate combinations of equilibrium constants for old reactions. Example: Given the equilibrium constants for the reactions 2 NO(g)  N2(g) + O2(g) KC1 = 2.3 x 1024 2 NO(g) + O2(g)  2 NO2(g) KC2 = 6.4 x 109 find the numerical value for KC3, the equilibrium constant for the reaction N2(g) + 2 O2(g)  2 NO2(g) KC3 = ?

  16. 2 NO(g)  N2(g) + O2(g) KC1 = [N2][O2] = 2.3 x 1024 [NO]2 2 NO(g) + O2(g)  2 NO2(g) KC2 = [NO2]2 = 6.4 x 109 [NO]2[O2] N2(g) + 2 O2(g)  2 NO2(g) KC3 = [NO2]2 [N2][O2]2 KC3 = [NO2]2 = [NO]2[NO2]2 = 1 KC2 [N2][O2]2 [N2][O2] [NO]2[O2] KC1 = 1 (6.4 x 109) = 2.8 x 10-15 2.3 x 1024

  17. Finding the Numerical Value for KC and Kp If we have a chemical reaction and know the concentrations or partial pressures of all the reactants and products we can substitute into the definition of KC or Kp to find their value. Example: Consider the reaction PCl5(g)  PCl3(g) + Cl2(g) The equilibrium concentrations of reactants and products, measured at T = 450. K, are as follows: [PCl3] = 0.0150 M [PCl5] = 0.0083 M [Cl2] = 0.0320 What are the numerical values for KC and Kp?

  18. PCl5(g)  PCl3(g) + Cl2(g) The equilibrium concentrations of reactants and products, measured at T = 450. K, are as follows: [PCl3] = 0.0150 M [PCl5] = 0.0083 M [Cl2] = 0.0320 What are the numerical values for KC and Kp? KC = [PCl3] [Cl2] = (0.0150) (0.0320) = 0.0578 [PCl5] (0.0083) Kp = KC (RT)n n = 2 – 1 = 1 = (0.0578) [(0.08206) (450.)] = 2.13 (Note: We do not include units for R and T because Kp, like KC, is unit-less, for reasons we previously discussed. We do have to use the numeri-cal value for R that is in terms of our standard pressure unit of atm.)

  19. Using the Equilibrium Constant There are several ways in which the equilibrium constant for a reaction can be used. The most common example is using the initial conditions for a system, the balanced chemical reaction, and the equilibrium constant to find concentrations of reactants and products at equilibrium. Example: The equilibrium constant for the reaction PCl5(g)  PCl3(g) + Cl2(g) is KC = 0.0578 at T = 450. K. In a particular system at T = 450. K we initially have 0.100 M PCl5. No PCl3 or Cl2 are initially present. What are the concentrations of PCl5, PCl3, and Cl2 when the system reaches equilibrium? We will use the “ICE” method - write down initial, change, and equilibrium concentrations in terms of the smallest possible number of unknowns.

  20. Example: The equilibrium constant for the reaction PCl5(g)  PCl3(g) + Cl2(g) KC = [PCl3] [Cl2] is KC = 0.0578 at T = 450. K. [PCl5] In a particular system at T = 450. K we initially have 0.100 M PCl5. No PCl3 or Cl2 is initially present. What are the concentrations of PCl5, PCl3, and Cl2 when the system reaches equilibrium? Substance Initial Change Equilibrium PCl3 0.000 + x x Cl2 0.000 + x x PCl5 0.100 - x 0.100 – x Note that [Equilibrium] = [Initial] + [Change]

  21. If we substitute into the expression for the equilibrium constant, we get: KC = [PCl3] [Cl2] = (x) (x) = 0.0578 [PCl5] (0.100 - x) x2 = (0.0578) (0.100 - x) = 0.00578 - 0.0578 x x2 + 0.0578 x - 0.00578 = 0 We may solve quadratic equations of this type by the quadratic formula If ax2 + bx + c = 0 , then x = -b  [b2 - 4ac]1/2 2a In the above a = 1, b = 0.0578, c = - 0.00578 So x = 0.0524, - 0.1102. The underlined root is correct. The other root would lead to negative concentrations, which is physically unreasonable.

  22. So at equilibrium (and recalling that x = 0.0524) Substance Initial Change Equilibrium PCl3 0.000 + x x = 0.0524 M Cl2 0.000 + x x = 0.0524 M PCl5 0.100 - x 0.100 - x = 0.0476 M As a check, KC = [PCl3] [Cl2] = (0.0524)(0.0524) = 0.0577  0.0578 [PCl5] (0.0476)

  23. Equilibrium Calculation – A Second Example Example: Consider the reaction N2O4(g)  2 NO2(g) KC = [NO2]2 = 0.0046 at T = 25 C [N2O4] A system at T = 25 C initially has 0.0100 M NO2 and 0.0100 M N2O4. What will the concentrations of these substances be when the system achieves equilibrium?

  24. Example: Consider the reaction N2O4(g)  2 NO2(g) KC = [NO2]2 = 0.0046 at T = 25 C [N2O4] A system at T = 25 C initially has 0.0100 M NO2 and 0.0100 M N2O4. What will the concentrations of these substances be when the system achieves equilibrium? Let 2x = change in the concentration of NO2. then Substance Initial Change Equilibrium NO2 0.0100 + 2x 0.0100 + 2x N2O4 0.0100 - x 0.0100 – x Note that other ways of defining x will give the same final concentrations.

  25. KC = [NO2]2 = (0.0100 + 2x)2 = 0.0046 [N2O4] (0.0100 – x) (0.0100 + 2x)2 = (0.0046) (0.0100 – x) 0.000100 + 0.0400 x + 4x2 = 0.000046 – 0.0046 x 4x2 + 0.0446 x + 0.000054 = 0 Quadratic formula, a = 4, b = 0.0446, c = 0.000054 x = - 0.00138, - 0.00977 Substance Initial Change Equilibrium NO2 0.0100 + 2x 0.0100 + 2x = 0.0072 M N2O4 0.0100 - x 0.0100 – x = 0.0114 M KC = (0.0072)2 = 0.0045  0.0046 (0.0114)

  26. General Trends in KC (Kp) Consider our general gas phase reaction a A(g) + b B(g)  c C(g) + d D(g) KC = [C]c [D]d [A]a[B]b We make the following general statements If KC >> 1 then products will be greatly favored over reactants at equilibrium. If KC << 1 then reactants will be greatly favored over products at equilibrium If KC ~ 1 then both reactants and products will be expected to be present at significant concentrations at equilibrium. The same general trends apply if we use Kp instead of KC.

  27. Example: The equilibrium constant for the reaction 2 H2(g) + O2(g)  2 H2O(g) is KC = 2.4 x 1047 at T = 500. K. A system initially has 0.100 M H2O. No H2 or O2 are initially present. What are the concentrations of H2, O2, and H2O when the system reaches equilibrium?

  28. Example: The equilibrium constant for the reaction 2 H2(g) + O2(g)  2 H2O(g) KC = [H2O]2 is KC = 2.4 x 1047 at T = 500. K. [H2]2 [O2] A system initially has 0.100 M H2O. No H2 or O2 are initially present. What are the concentrations of H2, O2, and H2O when the system reaches equilibrium? Substance Initial Change Equilibrium H2 0.000 + 2x 2x O2 0.000 + x x H2O 0.100 - 2x 0.100 - 2x

  29. So KC = [H2O]2 = (0.100 - 2x)2 = 2.4 x 1047 [H2]2 [O2] (2x)2 (x) In the above case, it is easiest to assume x << 0.100. Then (0.100)2 = 0.0100 = 2.4 x 1047 (2x)2 (x) 4x3 x3 = 0.0100 = 1.04 x 10-50 ; x = 2.2 x 10-17 4 (2.4 x 1047) Substance Initial Change Equilibrium H2 0.000 + 2x 2x = 4.4 x 10-17 M O2 0.000 + x x = 2.2 x 10-17 M H2O 0.100 - 2x 0.100 - 2x = 0.100 M Note that indeed x << 0.100 turned out to be true.

  30. Reaction Quotient Consider our general gas phase reaction a A(g) + b B(g)  c C(g) + d D(g) The reaction quotient for this reaction (Q) is defined as the ratio of the concentrations (partial pressures) of the products divided by the concentration (partial pressures) of the reactants raised to their stoichiometric coefficients. For reactions of gases we can define two reaction quotients, QC (in terms of concentration) and Qp (in terms of partial pressure). QC = [C]c [D]d Qp = (pC)c (pD)d [A]a [B]b (pA)a (pB)b

  31. QC and KC The definitions of QC and KC are similar. The key difference is that QC is defined for whatever conditions happen to be present in the system, while KC is defined only for a system at equilibrium (and so at a particular temperature has only one specific value). We use QC as follows: a A(g) + b B(g)  c C(g) + d D(g) QC = [C]c [D]d KC = [C]c [D]d [A]a [B]b [A]a [B]b If QC = KC, the system is at equilibrium, and so will not change. If QC > KC, reaction must shift from right to left (form more reactants) to reach equilibrium. If QC < KC, reaction must shift from left to right (form more products) to reach equilibrium

  32. Le Chatlier’s Principle Consider a system initially at equilibrium. We apply a change to the system. What will happen? How will the system respond to the change? The general way in which systems respond to changes is governed by Le Chatlier’s principle - “A system initially at equilibrium will respond to a change in a way that minimizes or opposes the effects of the change.” Note that in general a prediction we make using Le Chatlier’s principle can also be made using the reaction quotient. (The one common exception is the effect of changes in temperature on a system.)

  33. Example: Consider the following reaction N2(g) + 3 H2(g)  2 NH3(g) QC = [NH3]2 Hrxn = - 92.2 kJ/mol [N2] [H2]3 We initially have a system at equilibrium. Predict the effect of each of the following changes to the system: 1) Addition of H2 to the system. 2) Addition of NH3 to the system. 3) Double the volume at constant temperature. 4) Increase in temperature by 20. K 5) Addition of a catalyst.

  34. N2(g) + 3 H2(g)  2 NH3(g) QC = [NH3]2 Hrxn = - 92.2 kJ/mol [N2] [H2]3 1) Addition of H2 to the system. By Le Chatlier - System will act to minimize the effects of the change by removing some of the added hydrogen, that is, by shifting from left to right (making more NH3). By reaction quotient - Before the addition of H2 QC = KC. After the addition QC < KC, so reaction shifts from left to right (making more NH3). 2) Addition of NH3 to the system. System will shift from right to left (remove NH3) to oppose the change.

  35. N2(g) + 3 H2(g)  2 NH3(g) QC = [NH3]2 Hrxn = - 92.2 kJ/mol [N2] [H2]3 3) Double the volume at constant temperature. Doubling the volume will lower the total pressure. The system will respond by trying to raise the pressure. Shifting the reaction from right to left will increase the number of moles of gas and therefore increase pressure. 4) Increase in temperature by 20. K The reaction is exothermic, so we can think of heat as a “product” of the reaction. Increasing temperature increases the heat in the system, so it will respond by removing heat, that is, shifting from right to left. 5) Addition of a catalyst. A catalyst affects the rate of the reaction, but has no effect on the equilibrium for the reaction.

  36. Thermodynamic Equilibrium Constant and Reaction Quotient We have previously discussed KC (equilibrium constant in terms of concentration) and Kp (equilibrium constant in terms of pressure), and the corresponding terms QC and Qp. The thermodynamic equilibrium constant (K) and thermo-dynamic reaction quotient (Q) are defined in terms of the following standard states: gases - in terms of a standard pressure of 1.00 atm solids, liquids, solvents - do not appear solutes - in terms of a standard concentration of 1.00 mol/L For reactions involving only gases K = Kp, while for reactions involving only solutes K = KC.

  37. Example: Give the expression for K (thermodynamic equilibrium constant) for the following reactions 2 H2(g) + O2(g)  2 H2O(g) 2 H3O+(aq) + CO32-(aq)  CO2(g) + 3 H2O()

  38. Example: Give the expression for K (thermodynamic equilibrium constant) for the following reactions 2 H2(g) + O2(g)  2 H2O(g) K = (pH2O)2 (pH2)2 (pO2) 2 H3O+(aq) + CO32-(aq)  CO2(g) + 3 H2O() K = (pCO2) [H3O+]2 [CO32-] Notice the thermodynamic equilibrium constant for the first reaction is the same as Kp. In the second reaction the thermodynamic equilibrium constant is not equal to either KC or Kp.

  39. Free Energy Change for non-Standard Conditions For a chemical reaction where all the reactants and products are present at standard concentration (1.00 atm pressure for gases, 1.000 M for solutes, and ideal behavior) the free energy change is Grxn. What about the case where standard concentrations are not present? For a chemical reaction taking place at constant temperature and pressure, but any conditions of concentration, the following relationship applies Grxn = Grxn + RT ln Q Grxn - free energy change for the actual concentrations present Grxn - free energy change for standard concentrations Q - thermodynamic reaction quotient

  40. Example: Consider the reaction 2 H2(g) + O2(g)  2 H2O() What is Grxn for a) standard conditions (pH2 = pO2 = 1.00 atm), and b) for pH2 = 0.0100 atm, pO2 = 0.0050 atm.

  41. Example: Consider the reaction 2 H2(g) + O2(g)  2 H2O() What is Grxn for a) standard conditions (pH2 = pO2 = 1.00 atm), and b) for pH2 = 0.0100 atm, pO2 = 0.0050 atm. Substance H°f(kJ/mol) G°f(kJ/mol) S°(J/mol.K) H2(g) 0.0 0.0 131.0 O2(g) 0.0 0.0 205.0 H2O() - 285.8 - 237.2 69.9 a) is standard conditions, so in that case G = Grxn = 2 Gf(H2O()) = 2 (- 237.2 kJ/mol) = - 474.4 kJ/mol

  42. Example: Consider the reaction 2 H2(g) + O2(g)  2 H2O() Q = 1/{(pH2)2 (pO2)} What is Grxn for a) standard conditions (pH2 = pO2 = 1.00 atm), and b) for pH2 = 0.0100 atm, pO2 = 0.0050 atm. a) is standard conditions, so in that case Grxn = - 474.4 kJ/mol b) First find Q Q = 1 = 1 = 2.0 x 106 (pH2)2 (pO2) (0.0100)2 (0.0050) G = Grxn + RT ln Q = - 474.4 kJ/mol + (8.314 x 10-3 kJ/mol.K) (298. K) ln (2.0 x 106) = - 474.4 kJ/mol + 35.9 kJ/mol = - 438.5 kJ/mol

  43. Free Energy and Equilibrium Our general expression for the change in free energy for a chemical reaction takes on a particularly interesting form when we are at equilibrium. In general G = Grxn + RT ln Q At equilibrium, G = 0. , and Q = K. Substituting, we get 0 = Grxn + RT ln K Grxn = - RT ln K ln K = - Grxn/RT Notice what this says. Based solely on thermodynamic data we can find the numerical value for the equilibrium constant for a chemical reaction.

  44. Example: Based on thermodynamic data find K for the process NH3(aq) + H2O()  NH4+(aq) + OH-(aq) K = [NH4+] [OH-] [NH3]

  45. Example: Based on thermodynamic data find K for the process NH3(aq) + H2O()  NH4+(aq) + OH-(aq) K = [NH4+] [OH-] [NH3] Substance H°f(kJ/mol) G°f(kJ/mol) S°(J/mol.K) H2O() - 285.8 - 237.2 69.9 NH3(aq) - 80.3 - 26.5 111.3 NH4+(aq) - 132.80 - 79.5 112.8 OH-(aq) - 229.94 - 157.30 - 10.5 Grxn = [Gf(NH4+(aq)) + Gf(OH-(aq))] - [Gf(NH3(aq)) + Gf(H2O())] = [(- 79.5 kJ/mol) + (- 157.3 kJ/mol)] - [(- 26.5 kJ/mol) + (- 237.2 kJ/mol)] = + 26.9 kJ/mol = + 27.1 kJ/mol

  46. Example: Based on thermodynamic data find K for the process NH3(aq) + H2O()  NH4+(aq) + OH-(aq) K = [NH4+] [OH-] [NH3] Grxn= + 26.9 kJ/mol ln K = - Grxn = - 26900. J/mol = - 10.86 RT (8.314 J/mol.K) (298. K) K = e-10.94 = 1.9 x 10-5

  47. End of Chapter 15 “Science is built up of facts, as a house is built of stones; but an accumulation of facts is no more a science than a heap of stones is a house.” - Henri Poincaré, Science and Hypothesis . “Quite ordinary people can be good at science. To say this is not to deprecate science but to appreciate ordinary people.” - Peter Medawar

More Related