1 / 12

Cossor Radios

Single and Multi Channel Radios enable voice comms to/from ATC to aircraft. Cossor Radios. UK FRR 619 & 620. Single Channel Rx United Kingdom Fixed Radio Receiver 619 – VHF Receiver 620 – UHF Receiver. UKFRT 621 & 622. Single Channel Tx United Kingdom Fixed Radio Transmitter

yoshe
Télécharger la présentation

Cossor Radios

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Single and Multi Channel Radios enable voice comms to/from ATC to aircraft Cossor Radios

  2. UK FRR 619 & 620 • Single Channel Rx • United Kingdom Fixed Radio Receiver • 619 – VHF Receiver • 620 – UHF Receiver

  3. UKFRT 621 & 622 • Single Channel Tx • United Kingdom Fixed Radio Transmitter • 621 – VHF (117 – 137 MHz) low power 20 Watts • 622 – UHF (225 – 400 MHz) low power 20 Watts

  4. UKFRT 623 & 624 • Single Channel Transmitters with 100 Watt Amplifiers attached. • Improves range to approx 60 miles

  5. Single Channel Disadvantages • Time consuming to set up • Transmitter subject to valve aging • Restricted to one frequency • Prone to tripping

  6. Cossor Multi-Channel Airfields Air Defence Radar sites (including Convoys) Where is it located?

  7. Equipment Frequency Range • Freq:- • 117-136.975 MHz (VHF) • or • 225 - 399.975 MHz (UHF)

  8. Equipment Power • Power O/P • UHF 20 Watts or 100 Watts • VHF 20 Watts only Amplitude modulation

  9. The equipment can be operated locally • By the use of a plug in hand held mic. for TX. • By the use of earphone headset for RX.

  10. The TX & RX equipment can be operated remotely. • By the use of BT lines for Audio. • By the use of BT lines and or Data link for frequency selection.

  11. Equipment Configuration • Stand alone TXER, local or remote operation for both audio and frequency change data. • Stand alone RXER , local or remote operation for both audio and frequency change data. • Transeiver (TX/RX integrated system) local or remote operation. For both audio and frequency change data.

More Related