1 / 30

Digital Signal Processing II Lecture 7: Modulated Filter Banks

Digital Signal Processing II Lecture 7: Modulated Filter Banks. Marc Moonen Dept. E.E./ESAT, K.U.Leuven marc.moonen@esat.kuleuven.be homes.esat.kuleuven.be/~moonen/. Part-II : Filter Banks. : Preliminaries Applications

yvette-burns
Télécharger la présentation

Digital Signal Processing II Lecture 7: Modulated Filter Banks

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Digital Signal Processing IILecture 7: Modulated Filter Banks Marc Moonen Dept. E.E./ESAT, K.U.Leuven marc.moonen@esat.kuleuven.be homes.esat.kuleuven.be/~moonen/

  2. Part-II : Filter Banks : Preliminaries • Applications • Intro perfect reconstruction filter banks (PR FBs) : Maximally decimated FBs • Multi-rate systems review • PR FBs • Paraunitary PR FBs : Modulated FBs • DFT-modulated FBs • Cosine-modulated FBs : Special Topics • Non-uniform FBs & Wavelets • Oversampled DFT-modulated FBs • Frequency domain filtering Lecture-5 Lecture-6 Lecture-7 Lecture-8 Version 2006-2007 Lecture-7 Modulated Filter Banks

  3. 3 OUT 3 + 3 3 Refresh General `subband processing’ set-up (Lecture-5) : - analysis bank+ synthesis bank - multi-rate structure: down-sampling after analysis, up-sampling for synthesis - aliasing vs. ``perfect reconstruction” - applications: coding, (adaptive) filtering, transmultiplexers - PS: subband processing ignored in filter bank design subband processing 3 F0(z) H0(z) IN subband processing 3 F1(z) H1(z) subband processing 3 F2(z) H2(z) subband processing 3 F3(z) H3(z) Version 2006-2007 Lecture-7 Modulated Filter Banks

  4. u[k-3] u[k] 4 4 4 4 + 4 4 4 4 Refresh Two design issues : - filter specifications, e.g. stopband attenuation, passband ripple, transition band, etc. (for each (analysis) filter!) - perfect reconstruction property (Lecture-6). PS: Lecture 6/7 = maximally decimated FB’s = Version 2006-2007 Lecture-7 Modulated Filter Banks

  5. Introduction -All design procedures so far involve monitoring of characteristics (passband ripple, stopband suppression,…) of all (analysis) filters, which may be tedious. -Design complexity may be reduced through usage of `uniform’ and `modulated’ filter banks. • DFT-modulated FBs • Cosine-modulated FBs Version 2006-2007 Lecture-7 Modulated Filter Banks

  6. H0(z) IN H1(z) H2(z) H3(z) DFT-Modulated Filter Banks Uniform versus non-uniform (analysis) filter bank: non-uniform: e.g. for speech & audio applications (cfr. human hearing) example : wavelet filter banks (next lecture) N-Channel uniform filter bank: = frequency responses uniformly shifted over the unit circle Ho(z)= `prototype’ filter (=only filter that has to be designed) H0 H1 H2 H3 uniform H0 H3 non-uniform H1 H2 Version 2006-2007 Lecture-7 Modulated Filter Banks

  7. H0(z) u[k] H1(z) H2(z) H3(z) i.e. DFT-Modulated Filter Banks Uniform filter banks can be implemented cheaply based on polyphase decompositions + DFT(FFT) hence named `DFT modulated FBs’ 1. Analysis FB If then Version 2006-2007 Lecture-7 Modulated Filter Banks

  8. i.e. DFT-Modulated Filter Banks where F is NxN DFT-matrix Version 2006-2007 Lecture-7 Modulated Filter Banks

  9. u[k] i.e. DFT-Modulated Filter Banks conclusion: economy in… - implementation complexity: N filters for the price of 1, plus DFT (=FFT) ! - design complexity: design `prototype’ Ho(z), then other Hi(z)’s are automatically `co-designed’ (same passband ripple, etc…) ! Version 2006-2007 Lecture-7 Modulated Filter Banks

  10. u[k] Ho(z) H1(z) DFT-Modulated Filter Banks • Special case: DFT-filter bank, if all Ei(z)=1 Version 2006-2007 Lecture-7 Modulated Filter Banks

  11. u[k] Ho(z) H1(z) DFT-Modulated Filter Banks • PS: with F instead of F* (see Lecture-5), only filter ordering is changed Version 2006-2007 Lecture-7 Modulated Filter Banks

  12. u[k] u[k] 4 4 4 4 4 = 4 4 4 DFT-Modulated Filter Banks • Uniform DFT-modulated analysis FB +decimation (M=N) Version 2006-2007 Lecture-7 Modulated Filter Banks

  13. y[k] + + + DFT-Modulated Filter Banks 2. Synthesis FB phase shift added for convenience Version 2006-2007 Lecture-7 Modulated Filter Banks

  14. i.e. DFT-Modulated Filter Banks where F is NxN DFT-matrix Version 2006-2007 Lecture-7 Modulated Filter Banks

  15. + + + i.e. DFT-Modulated Filter Banks y[k] Version 2006-2007 Lecture-7 Modulated Filter Banks

  16. 4 4 4 4 4 4 4 + + + + + + 4 DFT-Modulated Filter Banks • Expansion (M=N) + uniform DFT-modulated synthesis FB : y[k] = y[k] Version 2006-2007 Lecture-7 Modulated Filter Banks

  17. 4 u[k] 4 4 y[k] + + + 4 4 4 4 4 DFT-Modulated Filter Banks Perfect reconstruction (PR) revisited : maximally decimated (M=N) uniform DFT-modulated analysis & synthesis… - Procedure: 1. Design prototype analysis filter Ho(z) (=DSP-II/Part-I). 2. This determines Ei(z) (=polyphase components). 3. Assuming Ei(z) can be inverted (?), choose synthesis filters Version 2006-2007 Lecture-7 Modulated Filter Banks

  18. 4 u[k] 4 4 y[k] + + + 4 4 4 4 4 DFT-Modulated Filter Banks Perfect reconstruction (PR): FIR E(z) generally leads to IIR R(z), where stability is a concern… PR with FIR analysis/synthesis bank (=guaranteed stability), only obtained with trivial choices for Ei(z)’s (next slide) Version 2006-2007 Lecture-7 Modulated Filter Banks

  19. DFT-Modulated Filter Banks • Simple example (1) is , which leads to IDFT/DFT bank (Lecture-5) i.e. Fl(z) has coefficients of Hl(z), but complex conjugated and in reverse order (hence same magnitude response) (remember this?!) • Simple example (2) is , where wi’s are constants, which leads to `windowed’ IDFT/DFT bank, a.k.a. `short- time Fourier transform’ (see Lecture-8) • Question (try to answer): when is maximally decimated PR uniform DFT-modulated FB - FIR (both analysis & synthesis) ? - paraunitary ? Version 2006-2007 Lecture-7 Modulated Filter Banks

  20. DFT-Modulated Filter Banks • Bad news: From this it is seen that the maximally decimated IDFT/DFT filter bank (or trivial modifications thereof) is the only possible uniform DFT-modulated FB that is at the same time... i) maximally decimated ii) perfect reconstruction (PR) iii) FIR (all analysis+synthesis filters) iv) paraunitary • Good news : • Cosine-modulatedPR FIR FB’s • OversampledPR FIR DFT-modulated FB’s (Lecture-8) Version 2006-2007 Lecture-7 Modulated Filter Banks

  21. H0 H1 H2 H3 P0 Ho H1 Cosine-Modulated Filter Banks • Uniform DFT-modulated filter banks: Ho(z) is prototype lowpass filter, cutoff at for N filters • Cosine-modulated filter banks : Po(z) is prototype lowpass filter, cutoff at for N filters Then... etc... Version 2006-2007 Lecture-7 Modulated Filter Banks

  22. Cosine-Modulated Filter Banks • Cosine-modulated filter banks : - if Po(z) is prototype lowpass filter designed with real coefficients po[n], n=0,1,…,L then i.e. `cosine modulation’ (with real coefficients) instead of `exponential modulation’ (for DFT-modulated bank, see page 6) - if Po(z) is `good’ lowpass filter, then Hk(z)’s are `good’ bandpass filters Version 2006-2007 Lecture-7 Modulated Filter Banks

  23. Cosine-Modulated Filter Banks Realization based on polyphase decomposition (analysis): - if Po(z) has 2N-fold polyphase expansion (ps: 2N-fold for N filters!!!) then... u[k] : : Version 2006-2007 Lecture-7 Modulated Filter Banks

  24. Cosine-Modulated Filter Banks Realization based on polyphase decomposition (continued): - if Po(z) has L+1=m.2N taps, and m is even (similar formulas for m odd) (m is the number of taps in each polyphase component) then... With ignore all details here !!!!!!!!!!!!!!! Version 2006-2007 Lecture-7 Modulated Filter Banks

  25. u[k] : : Cosine-Modulated Filter Banks Realization based on polyphase decomposition (continued): - Note that C is NxN DCT-matrix (`Type 4’) hence fast implementation (=fast matrix-vector product) based on fast discrete cosine transform procedure, complexity O(N.logN). - Modulated filter bank gives economy in * design (only prototype Po(z) ) * implementation (prototype + modulation (DCT)) Similar structure for synthesis bank Version 2006-2007 Lecture-7 Modulated Filter Banks

  26. u[k] N u[k] N N N : N N Cosine-Modulated Filter Banks Maximally decimated cosine modulated (analysis) bank : = : Version 2006-2007 Lecture-7 Modulated Filter Banks

  27. Cosine-Modulated Filter Banks ..this is the hard part… Question:How do we obtain Maximal Decimation + FIR + PR + Paraunitariness? Theorem: (proof omitted) -If prototype Po(z) is a real-coefficient (L+1)-taps FIR filter, (L+1)=2N.m for some integer m and po[n]=po[L-n] (linear phase), with polyphase components Ek(z), k=0,1,…2N-1, -then the (FIR) cosine-modulated analysis bank is PARAUNITARY if and only if (for all k) are power complementary, i.e. form a lossless 1 input/2 output system Hence FIR synthesis bank (for PR) can be obtained by paraconjugation !!! =Great result… Version 2006-2007 Lecture-7 Modulated Filter Banks

  28. Cosine-Modulated Filter Banks ..this is the hard part… Perfect Reconstruction (continued) Design procedure: Parameterize lossless systems for k=0,1..,N-1 Optimize all parameters in this parametrization so that the prototype Po(z) based on these polyphase components is a linear-phase lowpass filter that satisfies the given specifications Example parameterization: Parameterize lossless systems for k=0,1..,N-1, -> lattice structure (see Part-I), where parameters are rotation angles Version 2006-2007 Lecture-7 Modulated Filter Banks

  29. Cosine-Modulated Filter Banks lossless PS: Linear phase property for po[n] implies that only half of the power complementary pairs have to be designed. The other pairs are then defined by symmetry properties. u[k] p.26 = N : : N : Version 2006-2007 Lecture-7 Modulated Filter Banks

  30. Cosine-Modulated Filter Banks PS: Cosine versus DFT modulation In a maximally decimated cosine-modulated (analysis) filter bank 2 polyphase components of the prototype filter, , actually take the place of only 1 polyphase component in the DFT- modulated case. For paraunitariness (hence FIR-PR) in a cosine-modulated bank, each such pair of polyphase filters should form a power complementary pair, i.e. represent a lossless system. In the DFT-modulated case, imposing paraunitariness is equivalent to imposing losslessness for each polyphase component separately, i.e. each polyphase component should be an `allpass’ transfer function. Allpass functions are always IIR, except for trivial cases (pure delays). Hence all FIR paraunitary DFT-modulated banks (with maximal decimation) are trivial modifications of the DFT bank. provides flexibility for FIR-design Version 2006-2007 Lecture-7 Modulated Filter Banks no FIR-design flexibility

More Related